LEXIVON 5/8" Swivel Magnetic Spark Plug Socket, 3/8" Drive x 10" Total Length | Enhanced Magnetic Design with Thin Wall Socket, Cr-v Steel (LX-122)

It’s a pretty good spark socket, much better than harbor freight and every hardware store sockets. It’s deep, magnetic, swivel, and it’s affordable. I’ve only worked on JDM cars with this and it’s held up after many many uses. I have not used this with the newer cars 2020-2026, only 1999-2017. It’s been able to take seized sparks from rusted out engines, with minimal wear on the teeth of the socket.

Made of quality strong steel, works well, the swivel is handy, the magnet works better than the rubber grommets that usually come out when you pull the plug out. Great price for what you get.

This spark plug socket worked perfectly when R&R-ing the plugs and coils on a 2001 Ford F-150 4.6L. Much better than the klunky combinations of extensions, universal joints, and rubber plug-grabber spark plug sockets I used in the past. One observation: the job also requires a 7 mm socket to handle the little bolt that holds the coils in place. This magnetic spark plug socket ingested the 7 mm socket, was baffled as to what happened to the 7 mm until trying to remove the next plug. Plug socket would not fit on the plug, because the 7mm socket was neatly tucked inside the magnetic spark plug socket 8-). Good tool, well made, recommended.

Worked great for 3rd gen (2017) Tacoma. Couldn't have done the job without this.

Ease of use: Nice the extra security of the magnetic grab, but the depth of the socket could be a tiny bit deeper for added grip on the shoulders of the spark-plug.

Works as expected and not a bit less. Magnet held strong to the plugs. Pivot in the middle helped reach the back plugs on my f150

This tool is great for doing exactly what it was designed for. I saved hundreds of dollars doing my spark plugs myself!

A must for getting the plugs out of the motor.

Nicely made and with the angled swivel helps for some tight areas. The magnetic bit works well and you can be confident that you will not drop your spark plugs.

buen producto

Mit diesem Schlüssel ließen sich die Zündkerzen bei meinem A4 8W einwandfrei herausdrehen und dank des eingebauten Magneten fällt die Zündkerze auch nicht heraus. Selbstverständlich die neuen Zündkerzen erstmal nur handfest eingedreht und gewartet, dass sie die Temperatur des warmen Motors annehmen. Dann mit 28Nm angezogen. Zu beachten ist, dass man einen Adapter von 1/2“ auf 3/8“ benötigt, falls der Drehmomentschlüssel über einen 1/2“ Antrieb verfügt.

For me as a hobby technician it fulfills all my demands and it is a great tool with good quality and lot of value for the money.

Bon outil, pour changer les bougies de moto,très pratique il passe partout.Pour ma part parfait sur mon z800.