Door Access Control System Kit with 620LB Electric Magnetic Lock

Overall good, everything works the key cards and fibs were all programmed and the instructions got it working but there’s a information deficiency in the provided instructions. Only three of the 12 wires ( 5 if you connect a bell ) are used leaving some features nonfunctional or unused without better documented instructions. Such as how to set so that a card swipe AND pin pad entry are required for entry and the functions of the other unused wires are left a mystery I searched for a document page but there’s many iterations of this hardware and they don’t all have the same user procedure to program or default codes Also you’ll need 12 volt wire and angle brackets or z bracket with additional hardware to install on a door it’s not included.

The install directions were not as clear as I hoped, but self installation was still easy. I did by a door bell to wire in also. Depending on where you plan on installing everything make sure you have plenty of wire on hand. I installed the main unit in the attic and ran wire down to the door open button and keypad. Because of this setup, I did have to run out for more wire. Performance has been great. Overall I recommend this product.

No issues here

Excellent product. The reason it gets 4 stats is because I received the item without the wiring and more importantly the programming instructions. This cause me some stress on trying to figure out the wiring on my own (which I thought the system was defective). However upon contacting the seller they promptly sent the programming instructions which I basically corrected in 2 mins and then programmed the RFID cards in 5mins. Its always easy to set things up once you have the proper instructions. So far so good. System works perfectly, and is being used daily with regular traffic for one month and counting.

This is. A great item. Simple and cost effective. The directions are a little confusing for those who don't know wireing. But it's a simple Install. Easy programming and operation. Now here are a few things that may help you. If the power fails or you have to take the system off for any reason the programming is not lost. It is programmed until you change it. With this system it keeps the lock (magnetic lock) on all the time. If the power fails it releases. The term fail unsecure is what this is called. But if you have this system wired to a plug and get a ups battery back up or a battery back up kit it will keep it secure. I have ordered 5 of these and many others and this is one of the better ones for the pricing and operation. Worth the money. You can change the type of lock used to secure the door and even add a wireless remote to this system. I recommend this item and seller.

Customer service is terrible and Amazon isn’t any help. Constant beeping. Goes off once every minute. Took seven days to get a response. They decided to share their a** backwards instructions

You’ll need to be tech / mechanically savvy to do this. Or hire an electrician. And you’ll need an L bracket kit for an in swinging door. Not included. No wires included either.

Looked like a good value so I decided to give it ago. The instructions are very poorly written. Took many tries before I did get it to work. Using it on a hidden door project. The key fobs have to be placed on the sensor which makes hiding the key pad impossible. All and all I think it will be ok.

El técnico lo instaló sin problema y funciona perfectamente. Yo no soy técnico ni me interesa experimentar, así que no tuve problema con la instalación. Esa bueno que compren la contrapuerta para facilitar las cosas, pero tardaba demasiado en llegar.