Mount-It! Tilting TV Wall Mount for 37-80 Inch Flat Screen TVs, Low Profile Bracket Supports 175 lbs, Universal VESA 600x400 mm, Adjustable Tilt to Reduce Glare, Fits 16”/24” Studs

I am NOT the most handy person, but I'm also not the least. I'd say I'm a regular Joe. So I decided to forego my TV retailer's $100 installation and do it myself. I visited two different stores to examine and play with displays and read about 50 different reviews online for mounts, so I feel qualified for this write-up. I originally wanted a "full motion" mount that could extend and pivot sideways, but every review I read had bad comments about sagging/instability, so I stuck with the simple tilt. I had just bought a brand new Vizio flatscreen that I saved up MONTHS for and it was far from cheap, so more than anything I wanted a mount that protected my investment. And I got it. This thing is solid as a rock; I bet it could hold me (180 lbs) if I hung on it. Installation took longer than I wanted (about an hour), but only because it was my 1st ever TV mounting, I was nervous, and I had to make a couple trips to Home Depot down the block to get things I didn't realize I'd need. So, in that spirit, here is some advice/hints for you. 1) FIND THE STUDS. If you don't know how, ask someone who does. I asked the guys at the Home Depot and they set me straight. My studs were 19" apart (regular is 16") because I mounted over a fireplace so they were irregular. You will 100% most definitely want to do this. 2) - It comes with a level! When drilling into wood paneling like I was, you want to get it right the 1st time, because you can't just spackle and re-paint bare wood. You have to be 1 and done, and the built-in level was really helpful for this. 3) - You need a power-drill, 3/16" bit, and a socket wrench. Drill is for pilot holes for the lag bolts, and socket wrench is to save you a lot of time and effort with the lag bolts. The lag bolts (bolts that go into the studs) are huge, and it takes some serious effort to get those puppies in - a good thing, but I did it with a small monkey-wrench and it was time consuming and tiring. When I go to remove, I will use a socket wrench. 4) - It comes with a ton of hardware you won't use. But that's a good thing, too - different TVs take different hardware to mount, so they cover all their bases. Handy. Now my TV is up and looking great, and I have 0 concern about its sturdiness. Seriously, when installed correctly, this thing is no joke. Overall - extremely sturdy mount, but be prepared with everything you need before starting the install to save a lot of time. Hope this helps you, Amazonians!

My wife and I had an older Visio ~40" (I haven't measured it exactly) TV that we wanted to mount in the guest room. While not extraordinarily large or heavy, the mounting holes on the back of the television are more than 20" apart. This posed a problem for most television mounts that are made for TVs under 55". This left me with some options: either buy an expensive mount designed for large television or put the TV in garage and let it sit there. While I was OK with the second option, the wife was not. So I had to find another option, because I wasn't going to splurge on the $100 dollar mount that would fit this TV at Costco. This was that other option. I'm really handy, and I have installed TV mounts before, so this was relatively easy to install. I think the two stud mounts are easier to mount than the single stud mounts. The only thing I would advise to do is not rely solely on the built-in level. It's close, but I'm glad I checked it with my own level. I think if it were my first one I ever installed, it may have taken twice the time? It feels really sturdy, and I like that there is not a whole lot to it. If I have another television I need to install I would consider buying this one again.

I am not the typical DIY kind of guy, and yet found that mounting this unit was pretty straight forward. I purchased three (3) of these units, so far I only installed one (1). The tricky part for me was to find the studs behind the wall, the stud finder I was using was somewhat misleading, but that's unrelated to this review and to the quality of the unit. The quality of the unit is great, once mounted I was able to hold my entire body weight from the bracket and felt solid, I weight 155 lbs. Mounting my 47" Vizio LCD was straight forward; I was able to mount it with the screws and bolts included in the kit. I still need to mount two (2) TVs on the wall and when I do I am going to update this review, but so far I can say this is a good value. To save me some headaches I did not use the built in level, followed the other reviewers advice. The entire process took me a bit more than an hour, but that's because I had a hard time locating the studs.

Excellent heavy duty bracket. It was easy to install and very sturdy once installed. I have mounted a 50inch TV using this. Don't believe the level that comes with the package, it was way off compared to my Real level. The M8 screws which were included did not fit my tv. But it was not a big issue as I found the correct ones at home depot. Overall a good purchase. You don't have to spend much on tilting mounts when this is available.

ممتاز

Not as per the photos , received a cheap tv mount with very weak metal and the screws didn’t fit to any of my 3 TVs , in the picture looks decent product in reality it’s very bad 2 Dirhams Product

Built in level makes it quick and easy to install. Compatable with virtually all tvs, comes with all the necessary hardware for the job. Amazing mount!

غش، انتبه ليست كالصور ولا كالوصف استلمتها للتو وهي غير مطابقة للصور لا تتحرك لا يوجد ميزان مائي فيها. غش. ندمت على شرائها.