J-B Weld 2110 Metal Fuel Tank Repair Kit, Gray

Arrived in good order and a good product for what I have used it for.

Excellent . Sealed cracked oil tank easily

Don't mix in the bag as per the instructions! It's sets too quick and gets very hot. Squeeze both parts out onto card and mix a little first. Don't have long before it sets so work fast. Also it gets very hot. Then when you've got a little in place mix the rest and finish the job. Or order 2 as you may need more, like me. I mixed the first in the bag and it was like molten lava and went off to quick to use it all. Apart from that brilliant product.

A friend of mine told me about this Tank weld as he used it on his diesel tank which as worked for over 3 years now. As on the same car and model as mine. The 1st thing to due was to drain all the diesel fuel out. 2nd cleanup the area around the leak which was very small pin hole. Cleaned with a good engine cleaner around the area then let it dry. 3rd I then used a small amount of petrol in the tank to show where the pin hole was. I could do this through my pump access which is underneath my rear seats this is also where I drained my tank from. 4th I then followed the instructions for how to use the repair kit. We left it on overnight to let it get hard. when we check in the morning it was still sticky this was due to been cold weather. So we used a hand heat blower to help harden the fix. After 10 minutes it was dry. After about 15 minutes I filled the tank with 5 litres of diesel and waited another 10 minutes to check if the leak had stopped no more leaks was seen. I then sprayed the repair with stone chip paint. When I got back home I filled the tank with 20 litres and left it overnight with a dip tray/ bowl with a white paper towel to check for leaks. Next morning no leaks from my diesel tank. It’s been fixed now for over 10 days.

Very good value and has used it

Didn’t do anything, may aswell have put playdough on it and prayed

wow what can I say. Didn't repair a fuel tank. Childs go cart pedal! But it has set, and after a season in the summer and autumn it has continued to work and perform. Even kept some on a mixing section of wood and even that is still solid and un-wavering!

For me this just didn’t work. I’ve used normal JB weld successfully many times. Didn’t cure as I expected and didn’t last.

Used it to stop a leak on an oil tank from a pin hole. Worked well and hasn’t leaked since. Did the repair about 6 months ago and still holding. Seems solid

Worked great on the gas tank for my Farmall super MD

La tela es difícil de cortar o seccionar por la forma de los hilos. Es súper importante respetar las porciones porque aunque quede un poco más del componente b, después no seca la mezcla

But must use in one minute otherwise dried and must use hand gloves otherwise will start burning Bcz of chemicals heat

It worked well on a 56 Buick Fuel tank, sealed it up right away!