TORK TPE24VA 24-Volt Authentic Valve Actuator Control, Compatible with all 24VAC Control Systems, for Pools, Spa, Solar Equipment, UL Approved for Safety

I've never installed one of these before and it was not too difficult. I had a manual pool valve that I was tired of explaining to the family how to use so this solved that problem. To prepare, you have to remove the lid of the valve and adjust the rotation to fit your needs but the manual does a good job describing how to do that. After opening it I discovered I didn't need to adjust it at all and left it at the default 180 degrees rotation. I think all are like this because of the large torque it takes to turn one of these giant ball valves but you should know it takes 30s to rotate the full 180 degrees. The quality of the unit seems decent. I haven't tried the high price jandy variant so I can't be sure. I will say that the first one I got had a broken microswitch inside and had to be returned. The physical, manual operation of this switch does seem janky and could end up fouling things up and I hope to never need to use it. My valve gets used every once in a while for a waterfall but I imagine some of these switches are required for use every day use of the pump so the fact that mine still works after a couple months is maybe less useful to someone who has a more frequent use case. There is both a wired control and a 3 position switch to electrically control this valve. The switch was nice during testing and hopefully all I need for manual operation. I connected the wired control to a DPDT relay and an old 24vac transformer I found in my parts bin (I think it came from a fan). Connect 1 wire to the 24vac wire and the valve goes 1 direction and connect the 24vac wire to the other wire (3 pins total) and the valve goes the other way. The configuration of the inside of the valve is what determines how far the valve turns in either direction). I have some smart home automation that controls the aforementioned relay which allows the family to control it via voice or smart app. You ofcourse can instead connect this valve to one of those overpriced and constantly breaking pool automation controllers but I don't recommend it based on how often I see the pool guy fixing those in my neighborhood. The jandy version is so overpriced that even if this breaks in a year, I'll just buy another one and still save money.

This valve is a fantastic and simple to install product. It is a perfect fit for my Jandy OEM valve that failed. The valve came set to 180 degrees so i didn't have to fool around with resetting the cams. The installation took 15 minutes! Now my hot tub and pool are working perfectly again. This is actually the second Tork valve I've purchased. When another OEM valve failed a few years ago, I installed this same Tork valve and that one is still working perfectly. Once piece of advice - make sure you line up the small notch with your valve handle and the valve itself - you will know if you don't have it right as if not, the valve won't slide on easily. Additionally, the valve has a toggle switch so you can install it backwards if needed and you simply flip the switch so it operates backwards. Nearly foolproof.

I like the that the price was about half of the name brand actuators. It installed just as easy as the others and worked great for 20 months before the motor burned up. It does not cycle everyday in my system. Maybe once a month. So I guess it is good for about 20 cycles. I have 3 of my original Pentair actuators that are 11 years old and still going strong. ( 2 of them cycle everyday) I will be replacing this with a new Pentair OEM actuator even if the price is double. This apparently is not a replacement for the OEM actuator.

Works great. Takes a little know-how to get it installed correctly, but we got it eventually. Worth it. Would buy again.

Perfect fit and very easy to install. Worked great out of the box and no adjustment was necessary. Comes with the screws for mounting and the knob for fastening the original handle. The Jandy runs about $275 so for $90 I had to try it so hopefully it lasts. It looks just as good as the one it’s replacing.

Direct Replacement for Jandy JVA2444 This is a lengthy review – hope this helps you. First and foremost, this is a direct replacement for a Jandy JVA-2444 Actuator. The unit I received had the exact same wire and connector as the Jandy unit it replaced. If you are a pool contractor or pool equipment expert, that is likely all you need to know. However, if you are a DIY homeowner trying to fix your pool or spa equipment yourself, here are more tips. First and foremost, how do you know if your actuator is actually broken? Before you order this item, you should try to ascertain if you have a problem with your electronic panel or the actuator itself. The easiest way is to try to flip the switch on the bottom of the actuator. If the value moves with the switch, you might have another problem. If the value doesn’t move with the switch, that is a sign your actuator might be dead. If you have another actuator that is functioning normally, you can swap the plugs inside the panel and see if the actuator in question begins to function. If it doesn’t, this is another clue that the actuator itself is broken. It might be time to order this item. I recommend everyone watch the YT video titled “Jandy AquaLink RS – How to set/orient valve actuators for pool mode and spa mode”. You can search google for "troublefreepool" and/or any of these keywords for help with diagnostic troubleshooting or programming: “spa spillover actuator, pool mode, spa mode, and Jandy programming". Note, this item does NOT come with the handle. You will need to use your handle from your existing actuator. For the price, I guess that isn’t a terrible thing but I personally feel like you should get a new handle as well. Before installing, you might also watch the YT Video Entitled – “How To Replace A Jandy Automatic Actuator Valve Properly!” Good luck - hope this information is useful to you!

Purchased one of these to replace my Pentaire valve 17 months in October 2024 still working great today.

Tenia anteriormente uno de la marca jandy y lo cambie por este y tiene un desempeño muy bueno.

The unit was easy to install and very clear instructions came with it - thanks! There is also at least one video online of someone installing it that also is very helpful. Note that it does NOT come with the handle so you have to save the handle from your old one (I took off one star for that). My old unit was a GVA-24 and the handle from it fitted fine. Note also that the bolts have slightly smaller heads and are longer than the bolts holding the GVA-24 in place. So do NOT use the old bolts, use the new ones supplied. It appears to be impossible to obtain a replacement actuator valve handle so don't break your old one! I cannot comment on longevity as I only just installed it.

La verdad sigue funcionando muy bien, ya tiene meses trabajando, y comparado con las marcas lideres, creo que vale la peno ahorrarse unos pesos con esta opción.

Lo usé en una piscina y unciono muy poco de echo ya no funciona solicito devolucion