how is this attached to the wall by screws?

This is held to the wall as other answers have described. I just now installed mine and I have a word of warning. In retrospect (live & learn) I would buy my own anchors for this unit. The anchors supplied do NOT have the collar around the end that stops them from sliding into your wall! You need a 1/4 inch drill to drill a snug hole for the anchors. Tap them in with a hammer till flush and you'd think that they will remain there. They do not. I have basic sheetrock walls on a house built 20 yrs ago, so nothing odd or special. My first anchor slid into the hole and out the other side (into the wall) even though it was very snugly fit. I realized then that the trick would be to screw in the remaining 5 screws very very gently. I screwed them in with almost zero pressure until I could feel that they had gripped the plastic anchor. Now, since you have 6 holes drilled with anchors (I only had 5), you should leave each individual screw loosly engaged until you have gotten all the screws engaged. This way if you're off by a bit on your drilled holes, you can still get all screws to seat. Ok, so I got all screws engaged then proceeded to oh, so gently turn them, in an attempt to get them engaged enough to spread the anchors and then be firmly/tightly in place. No such luck. The remaining 5 screw/anchor combos have somewhat tightened. I would say about 50-75% of what they should be. If I try to wiggle the unit, it does not wiggle, but on one screw, I can twirl my screwdriver between thumb and 1st finger and the entire screw/anchor unit twirls. The others also just twirl although the screws are all the way in touching the plastic of the unit. Now, the mechanism that grips a broom handle is very tight. It is so tight that sometimes I have to push it up with my thumb to get the handle in. That would be fine, since things tend to loosen over time, and I would expect this to become easier as it's used. However, in this instance it's probably a major failing, since the unit is not tightly and firmly held onto the wall. It's snug, yes, but over the next 6 months, I expect this unit to get looser and looser till one day when pushing or pulling a broom it is going to come out completely. Hopefully it won't damage my wall so I can put some 'real' anchors in to hold it better.

Are there hooks to hang dustpan, etc?

I'm ashamed to admit that I haven't put mine up yet!! We moved into a condominium and have too much stuff so I've been busy with that. The box states that it has "2 pull-out hooks for hanging items." That sounds like it would have what you need!!! Good luck with it. My mother had one years ago (no hooks, though!!) and I really did like it!!! Vivian

How much weight can this hold? I would like to put a Swiffer Bissel on it. And maybe a featherweight bissell vaccuum.

Ive got a swiffer mop with the mop solution hanging on it. A vacuum if its really lightweight might work if its hung very securely with anchors or in a stud in the wall. Most things I have around mine are relatively light weight with the one heavier item.

I have 2 different configurations: one is 16 inches wide, and the other one 17.25 inches wide. The 16 inch one has 5 tool slots and 6 hanging hooks; the 17.25 inch one has 5tool slots NO hanging hooks.....

Manufacturer	home-it
Part number	205-
Item Weight	368 g
Product Dimensions	6.99 x 39.37 x 6.35 cm; 368.54 g
Item model number	5156027
Size	5-position
Color	white
Style	Garden
Finish	Brushed
Material	Plastic
Item Package Quantity	1
Plug Profile	Wall Mount
Special Features	superior Quality Tool Rack Holds Mops, Brooms, or Sports Equipment
Specific uses	Inside
Included components	Drilling tamplate, screws and anchors
Batteries Included?	No
Batteries Required?	No

Home-it

Detalles

Descripción

Presupuesto

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes