YWBL-WH Multi Keyless Chuck, Keyless Hand Drill Chuck 1/2-20UNF Mount 1~13mm Self-tighten Drill Chuck for Multiple Purposes

The chuck on my craftsman cordless drill would slip and unlock, drill bits FALL OUT in hard to find places. The chuck was impossible to remove. I removed locking left handed screw, put ginormous hex keys in chuck and hammered the fool out of it. I heated it with propane torch until the rubber parts smoked and chucked a snap on tools 1/2" drive hex driver into it and hammered the fool out of it with an Ingersol-Rand model 230 impact wrench for a long time. I CUT the chuck into tiny pieces with a four inch angle grinder and a cut-off wheel....took more than an hour. This chuck screwed right on, runs true and holds tight. Good price, quick delivery. I Love it!

Works great and holds my drill bits without slipping. You do not need to tighten it up with Gorilla hands either.

Cheap and good so far on my Ridgid 18V drill! seems solid but is sometimes hard to unlock.. this will probably get better with more usage.

Works ok but not the best. Loosens easily

This is a great and inexpensive replacement chuck for the Weider 1837 chuck used on Porter Cable drills. It uses all steel construction and costs less than half of the OEM replacement. If you have another brand drill, be sure to check your drill to make sure it has a 1/2 inch FINE thread shaft coming out of the drill. Follow instructions on You Tube as the removal screw is left hand thread with a T 15 wrench opening. This chuck will get your drill working properly again.

Seen some reviews with customers that replaced there Milwaukee drill chuck so I had high hopes, finally got the broken chuck off my drill and went to install the new one and doesn’t fit, also had to wait 2.5 weeks to get it, not to happy

Perfect fit, my m18 chuck broke. I own fuel tools and regular. passed down my my old to my brothers, this chuck is 100% my fuel chuck! Easy install and huge upgrade... After this you will NEVER worry again, it is that simple. P.s. I own $20K plus of tools and they all look used because I use them! This is a cheap easy fix/tool to get back to work!

Pleased.

Fit my Milwaukee drill. Easy to install. Fairly well made. Good value.

Funciono perfecto en un taladro milwaukee, tiene buen agarre en las brocas

S'adapte tres bien sur perceuse dewalt et le mandrin serre bien les meches pas de glissement

Buen producto

Fit perfectly onto my 5 year old Milwaukee M18 1/2 drill Cat No 2606-20. very easy to change use a 1/4 inch drive CHV PH3 Philips head bit to remove the retaining screw (left hand threads so to loosen turn right) DONT USE A NORMAL NUMBER 3 SCREW DRIVER YOU WILL JUST END UP RUINING THE SCREW !! re and re time about 10 minutes