Phanteks SSD Bracket for Single SSD Enthoo Series Cases (PH-SDBKT_01)

Top right corner. My case had the two ssd mounting locations on the motherboard support frame between the back side of the mobo and the case cover, which was a high heat death sentence. The m.2 drive was also sandwiched back in there. The case (metallic gear neo) left basically no room for breathing and no airflow for the drives, so I needed a solution to relocate them and this worked perfectly. In my case, I can mount two more brackets under it and have a total of 6 SSD's and one m.2, so these brackets can solve any storage needs I could throw at this machine. This bracket was the smallest I could find, and worked PERFECTLY. As you can see the drives fit just right in front of the aio in this case. All I did was drill holes in the black plastic cover that snaps onto the frame, and mount the bracket with screws, washers and nuts. 10/10 problem solver.

Perfect! Fits the Phanteks Enthoo Pro case. I recommend using the bottom, horizontal mounting location to ensure clearance. Holds two SSDs. Very easy to install. In the end, I decided not to use it for now as I didn't want to add another SATA power cable to my PSU just to run power to the back of the case. Still a great product and I highly recommend it. Hope this is helpful. The description does not state that it will fit the Enthoo Pro case but it definitely does.

Mount works as expected, decent construction, a bit pricey but not too bad. Just be sure to get M3 screws if your SSD/MoBo didn't come with any, as this bracket includes none.

Product is same as the original that came with the case. But it's just the metal bracket with no hardware or rubber mounts. In the P300 case it goes behind the mobo, due to the small height clearance the single ssd mount will work ( not the dual ssd bracket mount, rear case door won't close )

Used this in my Fractal Design Node 304 for mounting two SSDs. From what I can tell it's the only SSD bracket solution out there just meant to hold SSDs that can be purchased by itself. All others are 2.5" to 3.5" adapters. Checkout the pics for the finished build. Used some Scotch Restickable Tabs to keep it in place. Works really well.

Excellent product: I had to send back only because it does not fit the MATX case. This is for the Full ATX case. For the MATX this stick out 1/4 inch to much and can not close the glass door. if you force it shut you might end up damaging the door. I had the Phanteks PH-ES314ETG_AG EVOLV mATX Tempered Glass Edition. This was the only downside of the case I found was not being able to accommodate this product.

Worked perfectly for the Phantek case. A bit pricey for a single cage (about 1/4 of the actual purchase price for the Phantek case itself) bit I guess they gotta make money somehow.

This is overpriced for a little sheet metal that should come with the case... The price varies a lot over time, so wait until it drops for a somewhat more reasonable price. In about a month of it being in my shopping list, it varied between $6 to $14. I do like the case and needed another bracket, so what can you do?

Not much to say does what it's meant to do and fits.

El producto en si es bueno, solo que podían mandar los tornillos de sujeción como la unidad que trae la torre....

Bonne description du produit aucune surprise lors de la réception et même lors de l'installation. Conforme à mes attentes pour mettre un ssd et la livraison fut plus rapide que prévu.

Il prodotto è conforme alla descrizione, Phanteks una garanzia. Montato senza alcuna difficotà.

Preis/Leistung ist es gut obwohl ich finde für den Preis von z.b. der Evolve X sollte es standardmäßig drin sein. An einer Ecke war das etwas Scharfkantig aber leicht zu glätten