100 Pack Rok Hardware #8 x 1/2" (12.7mm) Standard Thread Truss Head Screws Wood Work MDF Zinc, ROKS8X12TPSZ

By the 1000 pack if you need more for a better price...I used these to install ball bearing drawer slides into 1/2" plywood drawer boxes. They worked great. They did not have a tendency to strip out just when they are getting tight enough like ordinary sheet metal screws do. The large shoulder / pan head was perfect. I like the screws in the 100 pack so much I ordered a 1000 next. GREAT hardware from ROK...they are worth the money for drawer slide screw.

Many of the small packages of screws you buy at the big box stores are junk; the heads strip and it's a pain trying to back them out once that happens. These screws are great. I used about 80 of them and no stripping even when I run the drill fast and apply pressure; it's also nice to have a slight washer built into the head. I'm using them to secure several drawer slides as the screws that came with the slides are junk.

Used these to replace old rattan webbing on my aluminum frame deck chairs with new strap webbing. Screws bit in nicely to the new holes I drilled into the chairs. Perfect length and head size for the job.

4 out of 5 stars because the heads are a little off center which can make alignment a bit tricky. I think the gentleman that stated they were 3/8" in length got the wrong product. Mine were pretty much 1/2" measured from the bottom of the head to the tip. As for using them with drawer slides in 1/2" ply, the drawers I'm building are made from 13mm baltic birch ply, after sanding they measured approximately 15/32". The first slides I installed resulted in a noticeable bump on the inside of the drawer but no poke through. Because they were so close I used a scrap piece of ply and drove 15 screws at time then flipped it over and ground off the tips. If you need these for drawer slides on 1/2" ply, you'll probably need to do the same or purchase 7/16" screws instead.

I use these screws for everything.

They are wood screws. If you actually have to think about them, then they aren't doing their job. These work absolutely fine. So, I don't think about them which is a good thing. I would recommend.

Used these to string webbing for patio furniture. Broad heads holds the webbing, so the webbing doesn't pull through. Good price compared to the big box stores

These are great for installing drawer slides. I was not able to strip a single one, and had to remount a few slides 2-3 times, using the same screws. I was really surprised. Will be buying the jumbo box, so I never have to buy them again.

As illustrated, good quality, prefect for drawer sliders

Fixer pierces de métal sur mdf

They're screws. They're good.

Screws were good quality. But missing some in 2 separate orderes/ delivers Disappointed