MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

What an awesome little gadget. It does everything that I needed, it fits perfectly behind my raspberry pi. So compact, so fast. Self supplied power. Feels durable, connected easily. It was a great price when I found it, works so well. Usb ports galore. Cheers!

Works well

I would this USB Hub useful with the DE 10 Nano for use in the MiSTer FPGA console. It's small, cheap and fits right into a MiSTer setup. If you flip the plastic guard for the Mister to the bottom of the board, and use longer brass stand offs, you can place the USB Hub on it and hold it down with some double sided tape. Only two downsides, when I try to later pull the USB hub off the plexy I taped it to, the case came apart. Not a huge deal as it just pushed back together, but it was a surprise nonetheless. The other thing is to watch out for is this is a non-powered USB hub, any power hungry devices, or having too many wireless dongles are going to suffer as there only so much power the DE 10 nano can supply with it's stock AC power adapter. If you are experiencing intermittent device failure on your USB devices, ether use fewer devices or switch to a powered USB hub. This is ment for a few low power devices like a keyboard, a wired gamepad and a mouse. I don't find this a fault of the Hub it self, its just that the hub is meant to offer some low power OTG options.

It works good for the price

Use case: I wanted a USB-A hub for charging my AirPods and heart rate monitor at my Peloton bike. It took me several months with my Peloton bike (original not Bike+) to realize its tablet has a micro USB port that I could use for charging. I had been charging my AirPods and heart rate monitor at an outlet in a different room and that was sometimes annoying as I would find myself clipped into the bike and only then realize I had left one or both of those devices charging in the other room. So that's where this handy little hub came into the picture. It functions perfectly and I particularly like how thin it is. I was a little worried that whatever hub I got would look bulky or out of place on the aesthetically pleasing Peloton bike but this little guy blends in nicely. With just a tiny piece of double-sided foam tape I had this hub mounted and it's hardly even noticeable. The only minor complaint I have is the red power indicator light inside the hub. The hub's black plastic is translucent so the red light diffuses through. It is somewhat helpful to know the hub is plugged in and receiving power but ultimately unnecessary. I solved this by putting a piece of black electrical tape over the area where the light was shining through the most. This isn't a particularly special piece of hardware but worthy of praise for how well it worked for my needs.

Using it to connect raspberry Pi to Victron MPPT, and has been working great.

All ports worked as expected on my Raspberry pi ZERO 2 W.

I bought this after one reviewer said he used it with his 2nd Gen Fire TV Cube and that's exactly what I needed it for. Well, he was right, it works great, and I couldn't be happier. Don't be put off by the small size when you first take it out of the box. It just makes it easier to move around when you need to add addtional devices. Excellent product at a great price.

I bought this so I could plug in multiple USB devices to my Raspberry Pi Zero W at the same time. I have had it for weeks and it has worked flawlessly the whole time. I attached it to my Pi case with a mounting square. I have an old Android phone that I control with my Pi via the Android Debug Bridge. With this hub I can access data from my USB hard drive and the phone simultaneously, while also charging the phone. It is quite nice that I do not need a separate 'wall wart' to supply power for this hub. Note: I am using a power supply that I bought with my Pi from a Raspberry Pi approved reseller; other supplies might not provide enough current to work.

Works well for my raspberry pi zero 2w. Used it to set up Raspbian desktop os. The USB A ports go in a little tricky. I love the texture and size of the device. It just looks so "maker-ish". Worth the money and also it doesn't need an external power source to power my mouse and keyboard. Also works with usb sticks.

I like the product, the only problem is that I can’t charge my device while using it.

I bought the micro usb hub to be able to use a mouse and muntiple inputs for a Raspberry Pi Zero 2 W and with four USB ports it works perfectly.

Works great, got this for my Pi zero, recommend to any Pi user, plugs straight in with the Micro USB no messing around, just works. Has a little blue LED showing power. Its a hub, not much more to say. Has one port on the end and three along the side, thats nice if you have a larger thumb drive for your Pi it can go in the end. Seems nicely made, would like to see a white version Will buy another one soon, waiting for them to go on sale.