33.25" Mount pole

Worked fantastic for my weather station very well.Built easy to assemble if ran into no snags, but I do have mechanical ability.

Works perfectly for mounting a Starlink antenna. I needed a solution that would mount to the canopy over my 5th wheel without having to drill a bunch of holes, this was it. My only real gripe is the tubing size is much smaller than the Starlink pipe adapter hole size, it tightens up just fine and has held just fine even with the high winds recently. It's hard to fault the manufacturer for something they actually didn't design their product for. Once mounted and tightened down properly, it has been rigid and stayed aligned.

Sturdy and easy to install

Works great for my Ambient weather station. Gets it up out of the way. Lots of good mounting options and good hardware. I gave it a four because when you tighten the bolts it's still tends to settle just a little bit, which doesn't make it perfectly vertical.

This is a flexible solution for Starlink Mini or other pole mounted device. Attached to chimney and turned the pipe around to direct away from the chimney and up at a 45 degree angle. Cables run through the pipe, and it can be swiveled downward when I want to move the Mini to the RV. Requires a pole interface for the Mini however. I'm using an adapter between the two pipe diameters, available online, so I can use the Starlink 2" pole mount.

Used to mount weather station it worked well. You have to really tighten it down good though

The bracket works great. Unfortunately the weather station I bought to mount on it is a piece of crap. Stay away from the Sainlogic SA8. The quality is so bad that Amazon won’t even let you do a review on it. I would think that a company like Amazon would not sell a product that has so many bad reviews.From the clock running too fast ( gains 20 minutes a day, wind speed and outside temp are inaccurate. I don’t know if the rain gauge is accurate or not since it hasn’t rained here since being installed. They have a help line but all you get is a recording asking for your e-mail but never get a response. I have a 1 year warranty on it but as I said I can’t get a response. Amazon will not take it back because I bought it in October for a Christmas gift and it was more than 30 days after purchase so basically Sainlogic is a scam .

I got this mount to use with a Davis Vantage Vue weather station sensor unit. The quality of the parts (pole sections, mount and "fixing kit" assembly brackets) appear very good. The paint/coating seems sturdy and not easily scratched through. I was impressed after unboxing and assembling the 2 pole sections with the "fixing kit". Because the weather station sensor needs to be level and secure my installation requires I do final assembly at the mounting point. Unfortunately, the assembly hardware is too weak to tighten the pole to the mount securely. Both mounting bolts stripped out as shown in the picture. In addition, the mount is too wide for the pole requiring a lot of torque on the hardware to get it tight so it wont move. Attempting to tighten it so that it was secure resulted in the stripped threads on both M6 bolts. I'm not sure it would tighten up properly with better hardware as I didn't try. I ended up using washers as spacers between the pole and mount to reduce the gap and finally get it secure. Plus sturdier bolts & nuts for the stripped pieces.

Excellent produit. Identique à la description. Très satisfait.

Ne s'adapte pas à la tige: embout rond alors que rectangulaire de la tige extérieure.