Omix | 13516.19 | Soft Top Bow Bracket, Left, 1&4, 4Dr | OE Reference: 68163705AB | Fits 2013-2018 Jeep Wrangler JKU

Works great!

Works well. Note that this is for JK Wranglers 2011 and after AND with soft tops made 2011 and after.I had a older top (I think from a 2010) on my 2014 JKU, with different brackets. Still had the old brackets from my old top, replaced with a newer OEM premium top (from a 2014), and the brackets didn’t work with the soft top frame. So these brackets were perfect fit.The screws you need are M6 (6mm) x 1 x 25mm. You can order stock ones but any hardware store will have them, I got mine from Lowe’s for less than $2 a pair.During installation, I would recommend putting the soft top all the way on (latching the front part on) and sliding the bracket onto the plate on the soft top frame, then screwing the top hole on this bracket into the frame of the car (then going from there with the other screws). It was difficult to push the bracket to the car frame with the bracket all the way screwed onto the soft top.Note that this is only one side, you’ll need to order the other side if you need both.

Fits my 14 JKUR perfectly. This bracket works for the factory Bestop premium twill soft top with spring assist. They only came on a JK from the factory with the soft top or dual top option. My JK had the hard top only option which did not include them.I bought a used soft top and the brackets were missing. I checked with the dealership and their price was similar to these but they didn't have them in stock. I ended up ordering them on Amazon for convenience. They feel solid and my top went on without a problem. Keep in mind these do not include bolts to attach them to the roll bar. I purchased those on Amazon as well, but a hardware store is a much more frugal option. Also this is the left side only, don't forget to order the right as well.

This made my new soft top fit. This is just the part I was looking for. I have an 07 JKU and was trying to put a soft top from a 2010. The newer tops have different brackets and would not attach to my Jeep. This bracket attached to the Jeep and the top attached to this and works great!

Worked as anticipated, exactly what I needed.

Fit a 2007 4 door JKU with a 2017 factory top with no issues at all. 13516.18 is the Right side.You will likely need bolts. m6 x 1 x 20mm is what I used. I needed 8 total and found them at lowes at about a buck each. Factory bolts come with built in washer so you may need a washers depending on the actual bolt you find.

Amazing product…fit perfect. Would buy again!

Fits and works perfectly to attach a 17 top to my 12 Sahara. This is the brackets you need. I just wish it came with the t30 screws instead if having to buy separately.