Real Avid Universal Glock Sight Pusher – Front & Rear Dovetail Sight Installation & Adjustment Tool – Works with Glock 19, 17, 43, 26, 22, 48 & More – Includes 2-in-1 Pin Punch & Nut Driver

All my handguns are Glock. I bought this sight pusher to use on my Glock. Upon opening it and trying to get it set up correctly, it took me about 5 minutes to figure it out. The direction sucks and did not mention any of this. AS I try to lock my slide into place, I notice that my slide sits too high and the pusher is hitting the slide. I spent a few minutes trying to adjust it down but it did not make any difference. After looking at the sight pusher, I notice there are 3 plates on the bottom, 1 is black and the other 2 are silver. If your slide sits too high, you have to remove the silver plate. I removed 1 of the silver plates and my slide was still sitting too high so I had to remove both of the silver plate and kept the black plate on there in order for my slide to finally sit in correctly. Using the sight pusher to push out the rear sight was very easy. It was putting the new rear sight back on that will require you to use some power. All in all, it worked for what I needed it for but I don't know if it's worth the price. It's almost $100 for this, when you can just use a rubber mallet for $10 on here and will do the job better. So to make this short, this sight pusher works but I would rather use a rubber mallet instead. It's cheaper and so much easier to use. Update 2025: after owning this product for close to a year and getting familiar with it. I wanted to update my previous review on this product. This sight pusher is actually the best one out there! Easy to use and putting on the rear sight is a cake walk. I highly recommend this sight pusher.

Overall I really like this product and it's a good buy. If I can offer 2 suggestions to improve the product....First, I'd like to have a non-marring tip on the adjustment tooth so as to avoid banging up sights. I did get some scuffing on my Ameriglo UC rear sight, but I'm honestly not upset as I will be using that particular gun alot and it will get some wear anyways, but if I were maybe setting up a nice "show piece" (yes, even Glocks can be made to look very nice) with something like some Heinie Gold Bead sights, I'd likely want to avoid the scuffs. Secondly, I think it would be nice to have a small cut out in the side of the sight pusher, just to one can get a slightly better view of the alignment when shimming the slide in place. Overall though, great little product! The instructions on ReadAvid's sight are easy to follow. Quick hint, you Glock 17, 19, 26 and 34 shooters just need to set the shoe orientation to "wide" and use the small shim. The tool is mostly metal, but the plastic grip is easy on the hands and it wasn't too hard to adjust the rear sight. It's a nice touch to get the 2 in one combo tool which stores in the adjustment handle. The bit for the front sight actually fits snug like you would expect it too, even better than the OEM Glock version IMHO. It's reasonably compact, so if you have a larger range bag (I use an old 5.11 backpack), this will be a nice addition to your range kit. This is also a nice gift option for the Glock owner in your life. Worth a try!

I needed a Glock sight pusher for several Glocks I'm changing original sights for OEM night sights.... after many looks at reviews on Glock sight pushers - I chose this one. You get a very well made tool that works VERY well - very adaptable to all sights and all Glocks... AND - you get the front sight tool/punch as a kicker!!! (no one else offers that tool combo that I found). In my opinion, the cost of this tool was WELL worth it compared to having a gunsmith change the sights and all that delay, travel, etc.... plus now I can micro "adjust" sights on my own to fit my personal needs for better accuracy. I'm very pleased - you will be too... High quality - great value on price and adaptability across all Glocks- all sights (incl aftermarket) - buy one.

I've been an armorer for over 20 years. When someone told me about this, my life became so much easier. The front sight tool fits int he handle and I've had no issues using this tool. Buy in confidence. NOTE: Responsive company. We purchased two for our shop. One of the front sight tools wasn't centered preventing a complete turn of the front sight screw. A simple call and a replacement was sent. They even sent postage for the return of the defective item so they could insure this wouldn't happen again.

I've broken 2. First one something went wrong with the washer that keeps the main screw centered. Second one, plastic piece that holds the slide in place broke. Both of these times, I've only used once. Do yourself a favor and get a MGW instead.

As with other Real Avid firearm tools, this is a quality, well made and sturdy tool that should last a long time with proper use and care. I have a G19 clone that I was having a difficult time with getting the rear steel sight mounted. I tried using other sight tools, to no avail, even with sizing carefully with small files and lubricant. I returned the tools. I saw the Real Avid Glock rear sight tool, and on sale here on Amazon, so ordered one. It came quickly. I took my time, with some more minor filing, and worked slowly tightening and releasing the sight pusher until the sight was, finally, mounted. This is a great tool, and I highly recommend it. Good job, Real Avid, I will definitely be purchasing more of your tools!

Worked as expe no issues

This is a great sight pusher. Easy to use (g17.5) on a side note also fits m&p slides (back sight didn't try the front) but the BUT the front sight tool... hex driver.. didn't work, almost like it wasn't cut or punched center. Had to use another tool for that..