HH-66 Toluene Free Vinyl Cement 4 oz - Vinyl Adhesive, Cement Glue, Industrial Contact Cement for PVC & Vinyl Repair - Waterproof Flexible Vinyl Glue for Tarps, Pool Liners, Inflatables – RH Adhesives

I came across this HH-66 Toluene Free Vinyl Cement, in the 4 oz. can. After doing extensive research online for my specific project. I purchased a used, but in excellent condition, full size, tonneau cover for my F150. I have a tool box in the rear and I wanted to cover the exposed bed. The tonneau cover had a length of 72" and i had to shorten it down to 45". As a handyman by trade and an RC hobbyists at heart. I took the tonneau frame apart and put it back together, almost achieving a factory finnish. 1. I performed a small test on two strips of vinyl. I didn't clean them (intentionally) because I wanted to test the cement on unclean surfaces to check the level of adherence. The cement bonded phenomenally! 2. Prep your surfaces/wipe both sides with alcohol before applying the cement. 3. Please note: The cement dries as you brush it on, if possible, I suggest working on small manageable sections like 5" to 10" sections at a time, brush on quickly. Once a desired section is complete, move on to the next piece immediately! "Do not waite to bond the pieces together after brushing the cement on them. Once the 2nd strip is covered in the cement start bonding the ends together so they don't dry-up on you in the process....if they dry, your going to be left with a weak/ poor bond, the ends may lift or you will end up with air bubbles trapped between the vinyl 4. Wetter is better! You need both sides to be tacky wet, not tacky dry. I can't stress this enough 5. Press and hold for a few minutes, I used duct tape, blue painters tape and a variety of different size binder clips for my application and it worked great, get creative 6. Take your time, my specific project took roughly 3 days. I worked on it mornings and late evenings. I wanted to finnish my project but I wasn't in a rush and it turned out great! 7. The smell wasn't overwhelming for me, (I have worked with an array of chemicals) but if your sensitive to smells, yeah, it's best if you work outdoors, a garage, a shed, or a porch or just crack open a window. 8. My seams bonded extremely well, tight, no water leaks, no issues, no lifted ends. 9. Clean up is a snap! If you don't have thinner just use your 91% rubbing alcohol on a rag and wipe everything clean, it will break down the cement the same way. If you made it this far, I hope the small details described in my review will help you during your next project (s) i would use this on flexible thick vinyl products, not the cheap flimsy stuff. Preferably on tonneau covers, pool covers, air mattresses, vinyl tarp repairs, etc. Just to name a few. Also, if you intend to use this cement on PVC pipes, don't! Just go to your big box store, they sell a kit specifically designed for PVC pipes. Reminder: Always try a test piece first, before moving forward. This way you will be able to move forward confidently. Take care all, just a handymans honest perspective.

It worked perfectly to repair an old L.L. Bean waterproof roll top duffel. At one of the side zippers the material had separated. I bought this to repair it before a recent dive trip. Perfect. It survived baggage check both ways. You never know it was falling apart before my fix.

Worked great for repairing my vinyl lawn mower seat.

Worked for what I needed it for but still had a strong smell. It held up well for about 6 months and I need to redo

Perfect adherence to our paddle board. No leaks since we used this for the repair and the board had a pretty significant tear. Used in conjunction with these patches. https://www.amazon.com/dp/B08B61JNV9?ref=ppx_yo2ov_dt_b_fed_asin_title

Used this glue to glue 2/3 of the vinyl yellow seat section you sit on, back onto the black plastic base. Put weight on the seat to hold it and left it alone over night. Been holding just fine. Far less expensive repair than purchasing a new tractor seat.

Used this to glue down several large vinyl patches on a bouncy house. Holding fine through several uses.

Does not work for vinyl fence post caps. What is it good for.

Excellent

An efficient adhesive absolutely ideal for patching our fabric covered aircraft hangar.

It’s too expensive.

Used this to glue new vinyl covers to fiberglass resin seats for my boat. One year on and the seats are still looking great and the glue is still holding strong, after a boating season. Well worth the money, highly recommended. Also glued a sole back on some trainers that the shoe shop failed to stick. Great stuff!

Cette colle a été utilisé pour coller des d-rings sur paddle collage rapide reste à tester si cela tient et le petit pot n’est pas bien grand 😂😂😂