RGBZONE RGB LED Controller, RF Wireless Remote Control, Dimmable LED Wall Controller for DC5V/12V/24V 30A 5050 3528 5630 Light Strips

It wasn’t working at first installation, but after reading through the instructions and page 7 paragraph 2 line 3 or somewhere in the tiny print of the written instructions it said to program the controller you need to power on and hold the two buttons. After that it programmed and started working and has been working great ever since.

We put lighting in our new kitchen to make it brighter. I (Lisa) have an issue seeing well and this really worked. It put the power for under cabinet and in cabinet lighting well. The installation having an electrician for a husband was easy and the control is set to when someone walks in the room. There is so much light that just to get a snack, drink or check something cooking it is plenty of light.

I just put a $20 spot into the ether. Should of gone with the reviews, but I was a fool and second guessed these low reviews. First, all channels on full. Keyboard LEDs worked, just no control. Cycled power. Reset keyboard connector. Open PCB and cleaned up poor rework. All dead now. *Bang!*

I bought this to control RGBW light strips for a bathroom I remodeled. The Light strip go underneath the cabinets, along the floor molding, and behind wall mirrors above the sinks. That ended up being more current than this controller could handle, so I use an amplifier too (and a big power supply). Anyway, this review is about the controller. I mounted it in the wall, using a metric box (others have mentioned that in their reviews). I had some difficulty getting the bezel to snap into place after securing the controller in the box, but eventually got it. Some of the controls are not intuitively obvious, so I recommend reading the "Chinglish" instructions... especially about the "mode" operations. The "color wheel" was supposed to be glass, but I think it's just glossy paper or maybe thin plastic- I don't know how long it will hold up to use, especiallyin a moist environmentlikea bathroom. The "color wheel" operates by touch- no moving parts- which is kind of cool, but also a problem in that it is difficult to accurately select the color desired. Fat fingers cover too many touch areas on the wheel... The on/off switch is in the center of the wheel, and I found that it is easy to accidentally touch the color part while trying to turn it on/off. The most irritating thing is that there is an LED in the center of the wheel that flashes dimmly when you touch on/off. It would be nice if the LED could be set to stay on all the time, because it is difficult to find the switch to turn it on in the dark without touching the color area. Example: I wanted to have the lightstrip color to be red, and dim, so I could use it in the middle of the night without lighting up the whole room, but I have to turn on another light to see what I'm doing, or else risk turning on Blue or yellow or almost any other color. Also, the controller doesn't dim the lights as much as I would like it to do. Other than that, it seems to work well so far (I've had it installed about 3 weeks now). Caveat Emptor.

Have been using it for about 2 weeks and is working just fine. Touch pad is a little sensitive but works well. Haven't had any issues with brightness and was easy to install just by using screws.

Muy bien producto se lo recomiendo

This switch offers great control, and a decent range of 'modes'. I simply wanted R/G/B options, and maybe some shades for fun. Once you get it turned on, it lights up Red or Green or Blue easily and turns them off just as easily. With all three on, it's a warm white light. The color wheel offers some nice blends. My only complaint is the power button. Perhaps it is the location in the center of the 'wheel' but it is very sensitive. While i can 'press' any of the R/G/B buttons or any of the 8 outside the wheel, the 'power' you have to almost 'not touch' to turn it on or off.If you actually touch it, it will not respond. I almost returned it, thinking it was defective, but a CSR assured me it was OK. I may put in a manual 12v rocker just to avoid this.

This is a rock solid, reliable unit. I can't believe how good the range is on this thing. I have the power supply installed in a weatherproof box outside my parents house the controller is inside the living room and it works without an issue. It is powering about 32 ft of RGB LED strip.

Exactly what I expected!

Muy buena calidad

Lo usé para un proyecto en un auditorio, me gustó que es muy fácil la instalación

Needed it for a client installation where there was no way to connect to a wall dimmer or switch. Connected this on the LV side AFTER the 12V driver and after ~10 seconds of figuring out how the remote worked, it was up and running. Just turn it off and on and swipe the dimmer. There's a manual, but you shouldn't need it it's so simple. All the terminals are so clearly labelled and it comes with tabs that allow you to mount it to the wall or wherever. Definitely will buy again!

Works well, but I have found one somewhat annoying quirk. When the input power is turned on from the off position, the panel sends a brief (few second) signal to the Leds instructing them to power up and colour cycle though a bunch of colours. They led will restore to the same setting you had prior to the power being turned off, but not without colour cycleing through a bunch of colours, and I can't seem to find a way to turn this function off.