3M Primer 94 1/2 Pint | Car Wrapping Application Tool

Delivered fast

Expensive, but it worked for what I needed. Very powerfully toxic (in the correct meaning), so wear a mask, gloves and goggles with plenty of air around you (preferably an open area or fan) while you use.

This stuff is a must if you are vinyl wrapping to proper stick down the edges. Interier bits you are wrapping benefit from a thin coat. No problems with this supplier at all & the price for that size tin is very generouse indeed. If like me you are new to wrapping & want to have a DIY dabble at doing some, i recommend you watch some of the pro's on youtube to get a flavour of whats needed... happy wrapping.

use on daily basis best in market fast delivery

Expensive but the plastic parts fitted to my car bonded well. Meaning the haven't fallen off. Big tin will last but only 5ml was required!

I use this type of products more then 6 years it's not glued not at all .no matter what I trying

this helped out a lots when I had to stick lights under my bike

Cumplio las espectativas

Un ottimo prodotto aiuta tanto dove le strisce led non si riescono ad attaccare, con questo prodotto risolvi tanti problemi

This is a much have for your vinyl/film to stick. Prep area by wiping with alcohol 99% then apply primer with swab on all edges and concave areas. Dry applications only. If using for dirt bike plastics I suggest covering most of the plastic in primer, decals take a beating. The vinyl with laminate is very stiff and resists the angles. Use a heat gun to help with contours.

Oberfläche fettfrei mit einem Wisch mit Bremsenreiniger machen. Primer mit dem Pinsel auftragen. Dann Teil aufkleben und kurz andrücken. Bei Aufklebern nur den Rand einpinseln.

Works phenomenally.