Silhouette Temporary Tattoo Paper, Basic, 8.5x11 Inch

I used these to print my own designs and after testing it on myself they're very easy to use! I don't own a silhouette i just printed them then cut them by hand Just have to make sure your picture is inverted when you print it and make sure you don't use a lot of water, a damp paper towel is fine. If you use too much water or press for too long the ink will start to bleed a pink/magenta colour but if you get past that they're good! You can see the see through bits if you cut too far from your line but that's to be expected. It is a bit expensive but it is a niche thing to find.

I made tattoos for my daughters party and they were a great sucess, kids loved choosing and applying their favourite images, and you can fit a lot on one sheet so the cost is worth it for something unique. If you are using this tatoo paper for the first time a few tips before you print the images - You need to remember to reverse images with words or symbols - I was going to do personalised tattoos with the kids names on them for party favours but I couldn't work out how to reverse the images on my computer. If you don't reverse the image any words appear as in a mirror - not cool! Also any white areas on an image will be clear if printed on a normal printer so will be skin colour once applied. I found it helpful to watch a couple of youtube videos before I printed as any mistakes are costly considering the price of the paper - but if you get it right the results are fantastic!

There are two sheets per pack. Very easy to get set up. Definitely wait for your ink to dry before adding the transfer layer! Especially for darker designs. Just read the instructions carefully. Print, then do the shiny thing. They do not last long though, get them wet and they are gone essentially. The print quality is very good, though darker designs aren't as clear. Would be great for kids stuff though as they do wash off so easily and don't stain.

want to hear a joke? i own a printer / scanner.. these documents are not A4 but close enough so i wanted to give it a try. there i am for a good few hours designing the coolest temp tattoos you can think of, set up the printer.. load the transfer paper in.. flipped the image horizontally so its not backwards.. i press print.. wait patiently, and theres an error due to the page size because its saying its not an a4. i go up to the printer and cancel the print. then i press GO on the printer because i have impulses to press buttons for no aparent reason. unfortunately forgetting the scanner has a document in there. not just any document but a hackney council fine letter lol. it wasnt even flipped so i cant even use it. what a waste of my first sheet 😪 silly sausage lol. other than my dumbness, its really great quality and comes with the plastic sheets too. thank you

This product is very low quality. Wasted the first sheet as the printer mis aligned. I have a lot of experience with printed material and this did not work. Second sheet worked but the transfer into skin simply did not work at all despite following the season instructions perfectly.

Used for a friends hen party. Created the design using Canva then flipped it and filled a word doc with the images. Didn’t have to set my printer up any specific way, it handles different sized paper easily. Allowed about 2 hours for ink to dry and then carefully applied the plastic layer. Was straightforward enough. Application was easy (used a couple of baby wipes to get the backing wet, then slide away) and the tattoos stayed on perfectly. Would use again

There are quite a lot of negative reviews for this product, which I don’t feel to be true to the product and may be more down to user error. As long as you’re printing to the size the paper is (and not just assuming it’s A4), print the images in reverse (so they are the correct way around when applied) and wait for the designs to completely dry before applying the protective film, you’re golden. The hen party I made these for had no trouble applying them either, they looked incredible. Just remove the protective film, apply to skin, dab with a damp cloth until it appears to have adhered & remove! Simple. I honestly don’t think the price point is too bad considering how much a company would charge you to do the same. We managed to get 6 designs on one sheet.

Only 2 sheets so no room for mistakes! Quite expensive for what it is. Ink can get damaged when you apply the adhesive sheet so can ruin the design.

Good quality priduct. But I think its a bit too costly, might be coz its an american product. But otherwise very well satisfied with the product..

Très simple d’utilisation et explications clair. Utilisé avec mon imprimante Canon. Ne pas oublier de changer le programme « style de feuille » de votre imprimante afin d’avoir une meilleure résultat.

I used this for zarya from overwatch doing her industrial costume for the angel of death tattoo she has, the paper goes on a little weird if you’re not precise after the fact but it does stay on for a while after you put it on (I had to use some heavy duty remover to get it off me but my skin is weird and basically makes everything a part of it 😂) also if you’re wearing it tout in the sun be prepared for the tattoo to leave sun tan lines unless you use sunscreen over it lol 😂

Good stuff. I used this to print out small tattoos as well as tiny nail decals, and both worked very well. Printing: No issues with smearing of the printer ink (color inkjet). Images came out clear, even for the <1/4" images. I was worried about having trouble applying the adhesive sheet and left margins on all edges, but I totally didn't need to. Both sheets went on near perfectly. I ended up doodling in the tattoo sheet margins with a permanent marker so that I could maximize my tattoos. Even those worked! Adhesive sheet: No issues at all, and it was easy. After peeling off the small rectangle of backing, I was able to easily line up the two sheets and press them together at the bottom. From there, I slowly rolled off the backing and used a credit card to smooth it out/apply pressure to adhere from the center out. This whole process went very smoothly. No air bubbles, no accidental sticking. The backing came off very easily and smoothly. Application: I cut my tattoos out with scissors. My tiny tattoos released from the paper backing very quickly, and were so easy to apply. If you decide to use these as nail decals, be sure to smooth them down to squeeze out any water or air bubbles before the tattoo dries! Longevity: I haven't had these on for too long, but they seem to be doing okay so far. I applied a small tattoo about 8 hours ago on my wrist, and it has withstood a half-dozen gentle hand washings. The nail decals did not bleed or shift when applying a topcoat, and are thin enough that I can't feel them through the dried polish. You can faintly see the outline of where I trimmed the tattoos, but it's not too obvious. Overall: I am super happy with these sheets! They were a ton of fun to use, and although expensive (you only get two sheets), I would get them again.

Ich hatte mir die Tattoofolie gemeinsam mit einer Freundin bestellt, weil wir beide unabhängig voneinander unser erstes Tattoo planten. Mithilfe der Folie wollten wir unser jeweiliges Wunschmotiv einige Tage lang so realistisch wie möglich auf der Haut tragen, um herauszufinden, ob es uns wirklich gefällt und wir es ein Leben lang behalten wollen. Nachdem wir die Motive gedruckt hatten (Seite ruhig so voll wie möglich packen, man kann jeden Bogen nur einmal nutzen) und eine kurze Trockenzeit abwarteten, schnitten wir sie aus und platzierten sie sogleich auf der Haut. Der Vorgang selbst funktioniert ebenso gut, wie bei klassischen Klebetattoos: Folie abziehen, Motiv auf der Haut platzieren, mit einem feuchten Tuch abdecken, kurz warten und wenn alles gut durchfeuchtet ist, das Papier entfernen. Optisch hängt die Qualität natürlich grundsätzlich erstmal vom Können des Druckers ab. Ist diese aber gegeben, sieht das Tattoo täuschend echt aus. Nur im Licht erkennt man die glänzende Folie. Auch bei der Haltbarkeit kann man nicht meckern. Sogar Wasserkontakt hält die Folie in gewissem Rahmen aus. Nach einer ausgiebigen Dusche löst sie sich allerdings, bzw. klebt durch das Aufweichen sehr stark. Schützt man das Tattoo hingegen vor starker Feuchtigkeit, bleibt es tagelang ohne Probleme haften. Entfernen lässt sich die Folie grundsätzlich gut, ich würde das jedoch in trockenem Zustand empfehlen. Zieht man sie trocken ab, lässt sie sich ohne Mühe entfernen und hinterlässt keinerlei Reste auf der Haut. Wenn sie aber einmal ordentlich durchnässt wurde, kann man die Folie nicht mehr im Ganzen von der Haut abziehen. Zudem beginnt sie, wie bereits oben beschrieben, unangenehm zu kleben und es bleiben Kleber-/Motivrückstände auf der Haut zurück. Diese lassen sich mit Alkohol/Öl jedoch leicht entfernen. Insgesamt eignet sich die Folie für Klebetattoos sehr gut und man hat je nach Pflegeaufwand einige Tage Freude daran. Ein Tipp noch bei Schriftzügen: Unbedingt spiegelverkehrt ausdrucken, wenn man sie in lesbarer Form auf der Haut tragen möchte. Bei unseren Motiven war die spiegelverkehrte Variante auf der Haut allerdings Absicht ;)