Loctite 319 Rear View Mirror Bonder 0.5ml

Worked really well, but you really do need to follow the instructions. It goes off really quickly once you put the adhesive onto the mesh. If you take too long getting it onto the windscreen, or if you try to move it once you stick it onto the glass, it will not work. So, you have a matter of a few seconds to put the adhesive onto the metal, place the mesh onto the adhesive, and position the base onto windscreen. Once in place, do not move, or the adhesive will not work. And remember, this only works for bare metal to bare glass. And really you need to separate the mirror from the base, if you're trying to hold the entire mirror assembly in place you will almost certainly fail.

Absolute utter rubbish do not waste your time or money, really really is a poor product..having built many many cars over the last 40 years this stuff is beyond rubbish.......

Yes it works , followed the instructions and no problems , on my daughters BMW , the interior mirror fell off with the button still in it , after some careful wrestling with some grips I managed to release the button , So after carefully working out where to put the button I marked the screen with some tape and bonded the button in place as per instructions , I waited 30 minuets twice as long as instructed . The real test was after connecting the wiring back I had to quarter turn the mirror onto the button , this took some force and quite clearly the bond held and the mirror clicked into position , Amazon driver apparently was unable to gain access to my house , the ring doorbell suggests differently so I had to pay extra to get a prime same day delivery , had to happen when it really is urgent , 1st one still not arrived but I will keep it anyway if it does arrive.

First time was a fail! Followed instructions, cleaned windscreen thoroughly with scraper blade and alcohol as well as silicon remover, applied as directed, left it for 60 minutes and it popped right off when I exerted the slightest pressure on the mirror bracket. Second time was a success! I used some glass etching cream to prep the glass and tried the remains of the glue and activator pad. This time it worked and the mirror bracket is solidly attached to the windscreen, for the time being at least. Loctite ought to upgrade their kit to include some glass etching cream and expand their instructions accordingly.

Does exactly as it should. Refitted my large Motorhome rearview mirror and all seems sturdy so far. Keep an eye out for any run of the adhesive onto the screen and clear up before it sets - could do with that being mentioned on the instructions, but doesn’t affect my score. Clearly time will tell, but so far so good!

gave screen area a good clean alcohol pads left for 15 minutes applied glue to mirror mount held in place 15 minutes but not sticking so applied tape to hold in place half hour just fell off 😫

I purchased this bit of kit as there aren't many products available in the market which will allow you to stick a rear view mirror which has a metal tombstone shaped clip directly and securely onto the glass. I did read the reviews before buying this product and it really was a mixed bag of chips. For the price it is, if it didn't work then it would be no real damage to my pockets. Call it trial and error! When I receive the product what I did realise is that the instructions given on the reverse is absolutely rubbish. There is no guidance given on preparation. Also there isn't any how to videos on YouTube or by loctite on how to use their product. Pretty shyte if you ask me! There is also there's an extra plastic tab with no mention what it's for. The instructions only mentions that there is a mesh and a glue included. What I did do do in terms of preparation is use rubbing alcohol to clean the glass area where I was going to stick the metal clip and also give the metal clip a good old clean by removing the old plastic sticker and then using with rubbing alcohol just give it a rub down to ensure that there is no dirt or grease to maximise adhesion. I cut the mesh down to size and I planned where I was going to stick the metal clip. I then cut open the adhesive smothered it over the metal clip (the smooth side). I then gently put the mesh on top of the metal clip and used the tip of the glue to push the mesh about so the adhesive works it's way through to the mesh and I did this very quickly to make sure that the glue didn't dry. Once the mesh looked soaked I worked it onto the screen held it firmly for 1-minute and let it work it's magic. I left it on there are overnight just to make sure that is perfectly stuck. In the morning I slide the mirror on and I took it off. I had a good old feel to make sure the metal clip-on still firmly intact and that he did a move or that it hasn't loosened up and guess what? It was stuck like concrete. If you follow the instructions and work quickly and work in an organised fashion then you really can't go wrong.

Wasn’t very successful. I suspect instructions are not very good

Tiene una banda rugosa para colocar entre el cristal y el retrovisor, lo puse colocando en ambas caras el pegamento, lo dejé presionado varios minutos y se quedó perfecto. No se ha vuelto a caer el retrovisor, pese a que no tenía la pieza metálica que traen algunos como guía. Muy efectivo si se usa correctamente y se limpia la superficie del cristal antes. Las instrucciones van en inglés y no son muy claras, hay que usar la lógica..........el español ya supera en número de usuarios a los ingleses, sería un detalle del fabricante..............

Fixed the problem perfect, very easy to do

Despues de una semana de aplicar el producto y dejarlo fijado con cinta y en el garaje sin usar el coche al quitarle la cinta veo que no esta pegado. Creo que puede ser por varios motivos el primero porque el espejo tiene un caparazon en la base que sirve para tapar el sensor de luces y lluvia y segundo porque la zona donde se aplica el pegamento es una chapa de la base pero esa chapa coincide en el cristal con una zona sombreada como en gris y que el pegamento ay no agarre incluso que no se termine de secar. Asique no lo recomiendo para espejos modernos o con peso aunque puede que en los antiguos que son mas simples pueda funcionar

Prodotto pessimo e completamente inefficace !!! Seguito pedissequamente le istruzioni presenti sulla scatola, ma la staffa dello specchietto della mia VW Passat non ha voluto sapere di attaccarsi al vetro anche dopo oltre 3 minuti di pressione sul parabrezza eseguita con le mani. Sconsiglio vivamente, 16€ buttati nel cestino. DELUSO!

Lo compré porque se despegó el retrovisor interior de mi coche. Trae una pequeña malla cuadrada que hay que recortar para adaptarla al tamaño que necesites y detrás del envase vienen las instrucciones sobre dónde y cómo poner el pegamento y cuánto tiempo esperar. Ya han pasado unos 2 meses desde que lo utilicé y el espejo sigue bien fijado, así que lo recomiendo.