VonHaus Tilt TV Wall Bracket for 37-85" Screens, Tilting Flat to Wall Mount with Quick Release Straps, 75kg Capacity, Max VESA: 400x600mm, for Curved and Flat TV's

Very good quality bracket and easy to put together and install. My only gripe is all fixings are horizontal and no vertical fixings to fine tune the levels. After very careful measurements and then re-measured this was perfect. Love the pull down straps to lock in at the bottom and easy to hide after for future use. Excellent value for money and an easy 5*

I recently purchased the VonHaus Tilt TV Wall Bracket for my 65” flat-screen TV, and I’ve been very impressed with its quality and performance. The build is extremely solid, with a heavy-duty steel frame that easily supports my TV’s weight (well below its 75kg capacity). I have no doubt it could handle even larger models up to its full 82” rating. Installation was straightforward thanks to the clear instructions and the included fixings. The wide VESA compatibility (up to 400x600mm) made it easy to match my TV’s mounting points. The quick release straps are a really handy feature — allowing me to safely and easily remove or adjust the TV if needed. The tilting function works smoothly, offering just the right amount of angle adjustment to reduce glare or get a better viewing angle depending on where you’re sitting. Once set, the bracket holds firm with no sagging or slipping. Even though it sits quite close to the wall, there’s still enough clearance to access cables if needed. Another bonus is that this bracket works equally well with both flat and curved TVs, which gives extra flexibility if I change my TV in future. Overall, I highly recommend this VonHaus bracket. It’s sturdy, easy to fit, and excellent value compared to more expensive brands. If you’re looking for a reliable, secure wall mount for a large TV, this is a great choice.

Great bracket, really easy to fix to both TV and wall and has lots of adjustment so TV can be placed at whatever height/tilt suits. Fixings supplied however were next to useless, we bought our own. Overall great product.

Nice and sturdy bracket. I DIY’d wall-mounting TV to plasterboard. I used the screws that comes with the bracket for the studs and bought separate Grip it TV fitting kit for the plasterboard holes. The only thing to point out is the gap from wall to my TV is not 3mm as in the description. It is atleast 4mm, which was misleading. Apart from that, happy with the product.

I bought the 15deg tilting version, but had only seen pictures of the fixed version and my previous tilting bracket (a different manufacturer) so was a little disillusioned when it arrived. BOY is the packaging small. You have to assemble the 6 piece wall mounting bracket, it is not 1 piece (and 16screws with 12 nuts and a number of washers). This is quite fiddly and the instructions were on what may as well been A1000 paper size. The print was very small and the instructions a little difficult to follow so working out how it went together and which way up took a few moments thought and laying out on the floor to puzzle through. Anyway, with commonsense, some choice words and a careful part count the rectangular bracket is assembled. Word of advice, thing about which side to put the nut and which the bolt when making assembly. If you put the bolt through the wrong way, the access with a spanner to the nut is almost impossible. Doubly a problem with the "square bolt" x4 as this cannot be turned, so the only option is to rotate the nuts. At least with the other 8 nut and bolts there is a little more access so can be tighten when assembled either way, but trust me, one way with access to the nut is alot easier. Fixing to a brick wall requires dia. 10 drill bit and large spanner for the bolts. (sorry, cannot remember the size). Don't forget the washers before bolting to the bracket. The slots in the bracket are quite wide, so the washers help seat the bolts. Like always getting 4 fixings on the top and 2 on the bottom all in the correct place on the wall was not easy and even using my full length spirit level (not the blooming small thing supplied) it was hard work. The end result was a very slightly off horizontal bracket, which over the length does not look bad, but it gets exagerated with the TV. Mine was 50" and looked very lopsided prior to tweaking Fine tuning of the squareness of the TV using the mounting to the bracket proved difficult, but not impossible. Due to the closeness/slimness of the mount make sure you put all the wires in the back of the TV before you offer it up to the mount. Tightening the 2 screws that hold the bottom of the bracket to the wall mount required a very long shafted screwdriver as access is limited to them also. I should have bought the zero deg non tilt version as have decided due to location that the tilt was not necessary. I could not achieve zero deg with the bracket so have a slight tilt, but that is my fault, not the brackets. What was the brackets fault is that I cannot get it to lock at 0deg, hence the small angle. I have not fault found why as was loosing wife appeal factor by now as it took more than 1 minute to put up. "why did you not buy the expensive one and geet it professionally fitted....?" BUT.... For the price it does the job wonderfully, so despite the above, I feel that the price compensates for all of this, hence 5 stars. At the end of the day, I have a 50" TV on the wall at the angle I want at a very good price. It took all in all about 45mins to 1 hour to put up, including hunting for spanners, drill bits, working out the instructions etc. which actually I feel is very good time.

Great TV wall bracket at a great price. Why pay more? If you need a TV wall bracket at a good price and you don’t need lots of movement for your screen, it tilts but will not twist (I knew this) then why would you pay more. Same quality as more expensive item, comes with all screws and fittings, my screen was the max size for the visa fitting still works a treat!

Very good value, easy to install with the right size masonry drill, Really handy having it come with a selection of tv mounting bolts

Nice bracket but the strips the TV bolts onto mounting holes were a bit out of alignment resulting in the TV not being level. Ironically swopping the strips around sorted the problem. Strange but there you go.

Qualità prezzo insuperabile,basta avere un po' di manualità e si monta facile.Unic a pecca istruzioni non in italiano e non proprio dettagliate,ma sono solo dettagli.

Für 15 EUR incl. Versand ein sehr stabiles Teil. Diverse Schrauben, Dübel, kl.Werkzeug, kl. Wasserwaage, alles anbei. Teile durchbuchstabiert, Tüten mit gleichen Buchstaben, so was hab ich noch nicht gesehen. 4 kl. Schrauben zum Zusammenbau der Halterung, 4 kräftige Schrauben für Dübel-Wand-Halterung, 4 Schrauben VESA an den TV (mehrere Größen und Abstandshalter anbei), TV auf Halterung legen, unten 1 x ziehen = sicher eingehängt, besser geht nicht ! Und dann noch 10° kippbar, fertig ist die Laube = Spaß-Kucken. Sehr empfehlenswert !

I searched a few other sites and compared multiple wall mounts. My criteria was low profile, low price, ability to hold a 50" LED TV, and tilt. My wife and I wanted to mount the TV above our fire place directly in front of our couch so there was no need for left or right movement of the TV itself. After comparing multiple wall mounts, I settled on this one, hoping for the best. For the price I figured it was worth a shot and I could not be happier with the purchase. Came well packaged, instructions were clear but not needed really. The picture on the front of the box is enough illustration to put this together correctly. Came with a level so placing it on the wall and marking out places to predrill was not difficult at all. The tilting motion is smooth yet stiff which is what I wanted. It took about 15 minutes to put together, half of that was the time it took to find the tools needed. 1/2" socket is needed for the lag bolts, phillips head screw driver for the screws and a 5/16" wrench for the little nuts on the frame were the tools to put it together and get it on the wall. I elected to not use the plastic anchors that come with the kit because I was able to mount it to studs. It comes with 6 lag bolts, 4 to go on the top rail and 2 for the bottom rail. I had to use washers on the back of my Samsung as the plastic washers that came with the kit were too big or the mounting screw for the back of the TV was not long enough, 1 of the 2. No big deal as it worked out fine, I had some spare washers from another project. Will buy another to mount TV in another room!

Niet slecht

Mise en place et solidité impeccable Seul petit bémol prévoir des vis plus petites car avec écran slim, il nous a fallu les recouper