MX-6 (8 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conductivity, long durability, non-conductive, non-capacitive

Good quality paste, easy to apply, getting better temperatures out of my CPU cooler than the stock applied paste. Functions exactly as expected, I've used this paste before and it's usually good for at least a year, even if you're fanatical about replacing your thermal paste regularly. Not too sticky and plenty of longevity.

My favourite thermal paste to use. Noticeably dropped my temps compared to MX-4, lasts ages in my systems, easy to use and spread, easy to clean off with IPA and functions just how you would expect.

This is great it has lowerd my chip by 20C a must have it is better than the previus and that was good compard to outher makes all i can say is WOW!

I've been an avid user of Arctic thermal paste ever since the silver days and as expected this worked exactly as expected. I have used this on several systems over the past 3 years and so far I have had zero issues, each system where MX6 was used to replace the stock thermal paste saw a temperature drop of around 6c (Although this is normally because the manufacturer paste was nasty) I have used the paste on direct die installations such as GPUs and the Intel CPUs inside the MS-01 and I have also used it on various laptop CPUs and desktop CPUs without any major issue of leakout or drying/cracking I'm sure there are better pastes on the market and for a long term installation such as servers or GPUs I would recommend PTM 7950s but for the price I don't think this is a bad paste and it is easy enough to apply

Whilst there is a performance boost in terms of thermals, but it's quite difficult to spread, which makes sense compared to mx4. However cost even though is a bit higher might be negligible to someone who does need that 3-4 degrees of improvement. Although I've only seen this in some pretty specific environments. It's great, but I wouldn't say it's much different from mx4.

I replaced and old liquid cooler with an air cooler (scythe mugen 6) recently on a 12600K/5070ti in a panoramic case (front and side are glass, so airflow is not good). While playing around with the new cooler I also swapped the paste from scythe to this arctic, I expected some change, but didn't notice much of a difference (properly cleaned with IPA etc) - I guess both paste are good. Just for reference my system is now using air cooling with the mugen 6 cooler, added 4 noctua chassis fans, fan curves are relaxed, all fans runs 20% till 55C, 60% between 55-75 and gradually increasing to 100% after that. System idles 32-35C in a warmish office and basically silent with all fans running on 20%, stays under 55C while doing office work, stays under 70C when stressing both CPU and GPU on max wattage with furmark and cpu-z, this is ofc not silent anymore I can hear the air being pushed around, but it does not go above 70C and overall much quiter than my old liquid cooler. So overall, the thermal paste seems to do its job, but I expected a bit more compared to the other one cuz of the hype and winning tests etc...

Its honestly very good for its price and my pc runs very cool.

This paste works really well but is a nightmare to spread. Warming it up on a radiator before application makes it a lot more manageable.

Rien à signaler. Fonctionne parfaitement, aucun soucis. Honnêtement, 8g de pâte thermique aussi bien pour ce prix, c'est donné.

Tested if it was good. it was abit more thicker then the MX-6 4g but i got the 8g to replace the devices (xbox, PC and others.) thermal paste. As it did it did better then the other thermal paste i had.

Die ARCTIC MX-6 ist eine Wärmeleitpaste, die für CPUs, Konsolen, Grafikkarten und Laptops geeignet ist. Sie zeichnet sich durch sehr hohe Wärmeleitfähigkeit und Langlebigkeit aus. Hier sind einige wichtige Informationen über die MX-6 Verbesserte Zusammensetzung: Die ARCTIC MX-6 hat einen messbar geringeren Wärmeleitwiderstand im Vergleich zur MX-41. Dies bedeutet, dass sie die Wärme effizienter von der Hitzequelle ableitet. Optimale Konsistenz: Je nach persönlicher Präferenz und Anwendungsbereich kann eine dünnflüssigere oder dickflüssigere Wärmeleitpaste bevorzugt werden. Die MX-6 bietet eine konstante Langzeitleistung und ist einfach zu handhaben. Sicher und vielseitig: Die MX-6 ist nicht elektrisch leitend und nicht kapazitiv. Dadurch wird das Risiko von Kurzschlüssen und Entladungen vermieden. Außerdem enthält sie keine Flüssigmetall-Bestandteile, die zu Verfärbungen oder Korrosionsschäden führen könnten. Anwendungsbereich: Die MX-6 eignet sich für verschiedene Szenarien, einschließlich Direct-Die-Kühlung bei GPUs von Grafikkarten oder Konsolen-Prozessoren1. Ihre Viskosität verhindert ein Auslaufen durch den sogenannten Pump-Out-Effekt. Verpackungsgrößen: Die ARCTIC MX-6 ist in Verpackungsgrößen von 2 bis 8 Gramm erhältlich. Wiederverschließbare Spritzen verhindern ein Eintrocknen der Paste und erleichtern das Dosieren. Insgesamt bietet die ARCTIC MX-6 eine zuverlässige Leistung und ist eine ausgezeichnete Wahl für thermische Anwendungen in verschiedenen Geräten. 🌡️💻🎮

Best and easy to work with. I could replace thermal paste for my 3 pcs with it. And still some of it is left.

عملت سكان و مدخلنيش علي الموقع بتاع التحقق؟؟