Kevlar Cord Black

Nice, pretty tactical and is incredibly strong, its resistant to fraying when cut but I still tie the ends. I didnt realize it was fishing line but i use it for lots of things.

Very strong cord. Used it to make a wind chime with very heavy metal pipe. 9 months later; it's still holding strong.

I chose the 0.8mm size (8-strand hollow-braid). 1st impressions using this cord -- I expected this cord to be round like a tiny rope, but it is flat like a tiny shoelace. Simple knots like square knot or bowline work with this cord. (It is NOT slick like nylon monofilament. Yeah, knots weaken the cord. There's sailor and mountaineer lore about proper knots for Kevlar.) This cord resists fraying at a metal hole, but not extraordinary. A freshly drilled hole can cut the cord. Chamfered hole, no fraying. Cord can be cut with a sharp knife, but scissors is better. Even with very sharp scissors, the cut end still frays. Unlike cotton thread, wetting the frayed end does not help getting it through a tiny hole. Can't melt the cut end to stop the fray. (It doesn't get sticky with heat, it just burns.) Soak with glue and then cut is the only way I found to stop the fray. Elmer's or water-soluble glue is less mess. First use was tying a tweezer to my backpack. The tiny tool is easily lost while pulling other stuff out of a zipper pocket. This cord works great. It is almost as easy to use as cotton string, but will last much longer.

Will buy more it works great for a trip line signaling device

Appears to be good quality, heavy duty kevlar cord. It should be excellent for field repairs, especially of heavier duty items like backpacks and would be suitable for bushcraft use. Lightweight and small packaging, which makes it easy to throw into your pack or camping gear for emergency repairs. You will want heavy duty canvas needles if using for repairing gear.

I practice falconry, and I was looking for some cord to make the equipment for my bird. This was the wrong size, but it's an excellent product, nevertheless. It's durable as can be, and it's very light comparatively. The quality is second to none. I'd recommend it to anyone creating crafts or equipment requiring a functional cord/twine.

I order 2 rolls, one of the rolls was missing a lot of thread. I attached a photo for you guys to see what I got. I’m really not happy for the fact that I didn’t get the amount a payed for. The quality on the other hand is good.

This cord / rope is heat resistant to at least 400 degrees. Tested with a high power heat gun and a Fluke temperate tester. This was used to make a suppressor cover so it needed to stand up to high temperatures rather than tensile strength.

Súper remsistente, es difícil de trabajar con el, pero su versatilidad, fortaleza y resistencia son innegables. Además es a prueba de fuego, de hecho a menos que se insista en exceso no se enciende con un encendedor de butano

Excellent

At $10 a Metre very expensive , did not get 200ft only 100ft, 31metres. NOT GOOD. Does not work for the intended purpose too thin for windchimes.

Nada q ver con la ilustración a lo que te llega

Buen producto solo hace falta sernmas claro en las especificaciones de cada presentación