3D Curved Screen Protector compatible with Garmin Forerunner 965/970 2 Pack - Full Screen Coverage

Perfect fit for the Forerunner 965. Once installed, you can hardly tell it’s on the watch—very clear with no bubbles. Installation was easy as long as you follow the instructions; I can only assume previous reviewers who struggled didn’t do that. It arrived as expected, though there was a slight delay due to shipping from abroad. Cheers.

Protector was easy to fit, instructions and an online video are provided. As others have said I had a few, very small, bubbles. They dissipated over the next 24 hours or so. I'm pleased with the fit and clarity.

The circle has not been cut through properly see you get a square edge one side, what a waste of money!

Fits well and screen works great but where the two cover films meet it leaves a line on the protective screen. This was an issue on both screen protectors.

When first fitting this, it doesn’t look great as they’ll be marks on it from squeezing the bubbles out. But it settles down and looks seamless after a few hours. Only reason it’s not 5 stars is that it has a slight rubbery feel which can catch and damage easily. This can be repaired, but the glass of the watch wouldn’t get harmed in this case if it wasn’t protected. Protecting it this way though will save it from a worse incident.

I received the 2 pack today. Bit apprehensive about fitting the cover. I made sure I prepared as best I could. Clean and dry surface, lots of room and light. Place everything on a cloth used for cleaning glasses, read and familiarised myself with the instructions and contents of pack. So started as per the instructions by cleaning the glass then peeling one half of the cover and placing over top half of the watch, this bit is pretty tricky and you have to be right above it to get it dead centre, you can lift and move as it does not stick using a chemical adhesive so once happy with the location I peeled off the bottom half and stuck that down. At this point there were bubbles and used the card tool to push the bubbles out. I had worked most out but there seemed to be one that would not budge and thought that maybe a tiny speck of dust or debris had somehow got in there despite the care I had taken, so peeled back the cover about a third of the way and resmoothed it out and the bubble had gone, still needed to work smoothing out a few very small bubbles around the edges but gentle pushing finally got them all out including using my nail gently on a stubborn one. Now it’s on, you would have to look very closely to notice it as it’s not 100% dead centre but that’s down to me and I’m very happy with it.

First the good news; it actually fits the 965 well! All the others I’ve tried have been the wrong size. Works with the curved surface too. Problem is bubbles. You get two in a pack and on both attempts I had small bubbles and ended up removing the protector. So now I’m back to square one. It’s a gel like protector (rather than a hard plastic one) so trying to push the bubbles out can end up denting the protector surface too.

Amazon review request are far to soon after purchase but that being said the 3D curved screen protector seems to be quite good you do get some air bubbles but most have gone I have two left at time of writing this and they a small and I believe they will go. If there is an option to edit and add to this review in time I will do so All bubbles have gone

Herken me niet in de negatieve recensies. Past perfect. Instructie zegt een paar dagen te wachten om de bubbels te laten verdwijnen. Ik zag dat na een nachtje idd al veel van de bubbels waren verdwenen. Mocht je ongeduldig zijn, dan kan je ook (voorzichtig, want TPU) zelf bubbels verwijderen met het pasje, met een microvezeldoekje om het pasje heen zodat je de protector niet kapot drukt.

J’en ai testé des protecteurs d’écran pour ma Garmin 965. Franchement, celui-là est tellement bluffant par sa discrétion que je vérifie souvent s’il est toujours présent. Même si ce n’est pas aussi solide qu’un verre trempé, c’est largement suffisant pour la vie quotidienne. Je recommande !

La presentación es estupenda, vienen 2 unidades, con una tarjeta de plástico para su aplicación, una gamuza, 2 toallitas húmedas y unas pegatinas para su retirada. La aplicación es complicadilla, he tenido que usar los dos porque con el primero, por más cuidado que he tenido, se quedó un pelito dentro, en medio de la pantalla. Aunque queden burbujas en su aplicación, con paciencia, se pueden ir llevando a los extremos y retirándolas y, una vez puesto, queda muy muy bien. El material es flexible y delicado, cuidado al pegarlo y retirar las burbujas, no apretar mucho con la tarjeta y no usar más uñas o se dañará. Muy recomendable.

Da ich bereits mit Begeisterung bei meinem Forerunner 955 Schutzfolien von Brotect genutzt habe, sollte es wieder ein Schutz von dieser Firma sein. Ich war unschlüssig, da viele negative Rezensionen vorliegen. Blasen auf dem Schutz usw.. Da mir keine Alternative zusagte, riskierte ich es. Das Ergebnis könnt ihr euch selbst anschauen. Auf beiden Bildern befindet sich der Schutz auf dem Display. Die Folie passt auf den Zehntel Millimeter auf dem Display. Sie umschließt perfekt die äußere Rundung und ist nicht ein Lufteinschluss zu sehen. Nach dem Anbringen befanden sich am unteren Rand einige wenige kleine Luftblasen. Diese verschwanden nach einigen Stunden von selbst. Ich bringe meine Folien immer sehr gewissenhaft und mit viel Ruhe an und hatte speziell bei Brotect noch nie Probleme. Meine Tips: Vorher Hände waschen, nur Anbringen wenn kein anderes Familienmitglied in der Nähe ist, mit dem Feuchttuch reinigen, Microfasertuch einsetzen, mit den Klebestreifen gründlich abtupfen, dann sofort anbringen und ausgiebig mit der Plastikkarte von innen nach außen streifen. Die obere Schutzfolie entferne ich erst wenn ich mit dem Blasenausdrücken fertig bin. Anderenfalls könnten die Folie zerkratzen. Ich vermute, dass einige negative Rezensionen aus einer nicht zu 100% präzisen Arbeit resultieren. Sorry.

Non riuscivo a decidermi ad acquistare il FRN 965 per via dello schermo a bordi curvi, perché questo tipo di display non consente l'utilizzo di vetrini (ok, si possono utilizzare i vetrini, però o li metti grandi come la parte piatta del display, e sono orrendi, o li metti grandi come tutto il display, ma poi resta una parte non aderente e sono ancora più orrendi). Purtroppo il FRN 965 con schermo zaffiro non esiste e le alternative Fenix ed Epix non mi convincono per altri aspetti. Ho letto qualche recensione positiva di questi Brotect e mi sono deciso. Devo dire che il risultato è superiore a ogni mia aspettativa. L'applicazione richiede un po' di pazienza e precisione, ma se si procede con attenzione e si seguono le istruzioni, la pellicola aderisce in modo perfetto all'orologio. Le foto allegate le ho fatte dopo 3 mesi di utilizzo intenso, indossando l'orologio h24. La pellicola ha qualche graffietto insignificante e so che il vetrino sottostante è ancora perfetto e quando vorrò un display nuovo non dovrò fare altro che sostituire la pellicola. Soprattutto, nonostante l'utilizzo intenso e senza alcuna cautela particolare, la pellicola non mostra il minino segno di distacco. Si fa veramente fatica a vederla e non interferisce minimamente con il touch screen, né peggiora in alcun modo la visibilità del display, né come risoluzione né come luminosità. Sono veramente soddisfattissimo.