1 Pc RGBW Mini Button PCB LED Welded with Longer PTFE Cables + 3Pcs Transparent Resin SLA Part LED Shade Shell kit Compatible with StealthBurner Extruder SB Toolhead for Voron 2.4 Trident 3D Printer

Surprisingly these worked perfect on my SB. Length was fine. Wiring was not crossed.

long enough to work with my longer hot end (phaetus rapido v2 UHF)

Well soldered connections. Came with resin printed parts for the logo led. All the parts were printed in clear. Honestly when I pressed the logo diffuser in the casing broke. I also could not get the LED into the logo holder. Printed them on my printer and used the diffuser and it all worked great after some light sanding to get the diffuser edges smooth. Honestly I would suggest just sending the diffuser as the rest of the parts can be printed easily

I bought this to just install, ya know? I ended up having to solder my own cable from the LED series to the Stealthburner PCB. It was about 1/4" too small no matter how i routed it.

Most if not all of the prewired sets have minimalist wiring. Combine that with hard, stiff PTFE insulation and it becomes a real problem. This set is far better. The wire itself is a higher gauge, and the soldering is strong and correctly oriented. Lengths were perfect for installation, with enough slack to de-strain the solder joints. The SLA parts were excellent. I see other reviewers here that complain about the LEDs not working. These are neopixel LEDs and require a data signal to drive them, bit just voltage. I can confirm mine works perfectly, and has been since the beginning.