Full Housing Shell Kit

Highly recommend! Having a slightly more “advanced” tool kit would help, also trigger pins and pin tool (made my own) would also help. The pins are the only thing that may set people back from utilizing this bad boy 100% Everything works perfectly, housing and body came together 10/10. Looks and feels like a fresh Elite V2- 10/10! This rebuilt my (pre-ordered) V2 years ago. Good stuff here!

Worked perfectly for my elite, after dropping it too many times the plastic on the grips just shatters etc but after getting my elite and putting all the guts into this case it's as good as new.

This worked out pretty well for my repair. It turned out I didn't need be inside frame. I'll hold on to that in case I need it in the future. The only reason I took one star off is there are these little plastic buttons that signal the controller when you hit the customizable paddles on the back, their design is somewhat off. They function 100%, but the paddles now feel a little spongy and don't have the tactile click the original version does. I swapped those back to the original MS component but I lost one somewhere in the carpet so no clicky clicky.

Worked perfectly for rebuilding. Easy to use. A little pricy for what you get.

i converted this controller from red to black and the parts were amazing quality no issues except the bumper. i think it was a little thick on one of the prongs that touch the button on the controller and wouldn’t work properly. i shaved a little bit off of it and it works perfectly fine now. ive had the controller modded for almost two months now and i play every night and still feels brand new. 9/10 since i had to shave excess material but solid purchase overall.

Some of the parts that I would have liked to have replaced were damaged in either shipping or packing. The outer shell is what I mainly needed to swap and this looked to be OEM quality. It would have been nice to include adhesive strips for the magnets. Also, a link to some instructions would be nice. I had to follow multiple walkthroughs to help me swap the shell. The screwdrivers and pry tool broke during the disassembly of the controller. I used my I Fit It tool kit to complete the swap of parts.

What i don't like is the availability of almost every intricate piece that you would say need at that moment when you don't have the 1 screw that got striped from the torque t driver or the 1 side p switch for the trigger locks with mapping paddles circuit board and that's 1 of the most unique and only bay gots from random people small store if not just a person with some bulk equipment. Plus the spring for the triggers and the cusion adhesives to even the adhesive if you want perfect like elite 2 comes lastly the magnets dpad base mags back charger mags. Under the paddle switch map board mags... I think there's 10 magnets in the whole controller. So that said this is the best to use to replace almost everything completely perfect and price is very good in my opinion though should come with some springs or adhesive at the price shouldn't be to hard. I hope soon to see those paddle circuit board that has 2 t2 screws in left and right circuit switch.

Replaced my controller body due to rubber grip coming apart from plastic. Pry tool sucks. Broke it in 2 seconds but case is well made and everything fits where it should. I should have changed batteries because it had to come out anyway.

I was a little wary that they were not genuine oem parts,i dont think they are as theres no part number stamped on them.the gen elite series 2 shoulder buttons have part numbers stamped on them.But these werent advertised as such so no issues there. However dont let that put you off,they came well packaged in a small box and after fitting together they worked just fine.Have a good look at youtube videos and study them before stripping down the controller if youve never had one of these apart.There is a 1 star review on here because the user wrecked his controller,thats on the owner not the guy who sells these kits.You strip them at your own risk. All in all im happy with the kit.

Nicquel

Por mi parte todo perfecto, he reconstruido el mando por completo y ha quedado como nuevo.

Das Gehäuse ist sollide und passt perfekt.

Just brilliant for the controller fits perfectly 10 out of 10