- monTEK Swivel Bike Wall Mount, No Heavy Lifting Required Bike Wall Mount, Bike Hangers for Garage, Space-Saving Bike Rack Garage, Easy to Load and Unload, Bike Hanger Can Hold Up to 77 lbs, 4 Pack

Very sturdy and well made. Super easy to install. Fits 2.8inch MTB tire. Adjustable for tire diameter. No issues with MTB mud guard. Most important: half the price of Steadyrack.

We have a couple of bicycles that need to be in the house instead of out in the garage, but they were taking over my home office. I really love these bike mounts. They hold the tires so I’m not afraid of their being damaged to the rims. I love that I can swing them out of the way when I need to get into my little cabinet. They were easy to install once I made sure I knew where the stud was, and they are very strong. I really like the way the bikes are hanging up, also.

If you're looking to make room by hanging your bikes on the wall, these bike hanging swivel wall mounts are exactly what you need! The mounts fit all of our bikes - 29, 26, 24, and 20 inch wheels. The mounts support the weight of our 29er emtb (e-bike) as well. They are easy to adjust and swivel so the bikes take up less room. I staggered the mounts high and low to make them lay flatter and that seemed to work really well. Now time to finish the shed! I just bought another pair to hold a few more bikes. I'm very happy with the quality, ease of install - they include lag bolts for a more secure mount to the wall, and the fact they fit all of our bike sizes.

good, sturdy and functional. It is easy to mount and unmount bicycle on the hanger. I like the idea of having a sturdy metal slot where the front tire rests on and it does not put any load on the rim. overall I like it but it is not exactly as I wanted as this hanger to function since the bulk of the hanger cost you some space because the mount has an inch or two further out from the wall so a bike would be pushed a little forward. So you have to make sure this would not be problem where you want to install it. I had to move it another wall just because this. it does not swing as much as other low profile hangers could do. so you would loose a little more space because of this limitation. the max turning angle seems just a few degrees less than the others but in real world application it is significant difference. again if you have significant space constraint this is also something you need to consider. installation is straight forward. I wish the bottom piece was also made with a better quality and sturdy plastic or rubber . It is as same as the cheaper flimsy version of the hanger and it does not feel good quality piece. But it gets the job done. overall it is a good product.

I bought 6 of these and spaced them 10” to 14” apart on the garage wall and they work well enough. They appear to be built strong enough, decent quality. I’m hanging BmX bikes, a beach cruiser, and some mountain bikes. The space that the wheels sink into is where you might run into some issues. A bike with smaller or thinner wheels/Tires don’t fit very snug which results in the bike hanging with the wheel turned slightly and loose. I remedied this by adding some foam padding inside the rack so the wheels/tires are snug. I also used stronger lag bolts to secure the racks. I plan to buy a few more of these. For the price, these are pretty great, you might just need to modify them a tad. I gave 5 stars because the wheel spacing isn’t really a design flaw and the bolts they provide you with are fine to use, I just modified the rack to make it work for me.

easy to install and work great

Easy to install. The bike's front wheel wants to turn once the wheel is in the bracket. You have to make sure the wheel is straight, or the bike falls. This is not easily understood by a youngster or people not mechanically inclined. A whole row of bikes can fall once one is tipped or bumped into.

I needed a solution for all the bikes we have. Before this system, my bikes were strewn all over the garage and difficult to navigate. To get these installed in my garage, which is cinderblock, I had to mount a 2x4 frame and then put 3/4” plywood on top. I then mounted these to the plywood and they work great. They are sturdy and hold the bikes securely. I love that they fold up and can be angled too. It has really saved a lot of space in my garage. The only difficult thing I had found was the measuring of how high off the ground to mount them. There is only a few inches between being able to have your bike vertical and the top wheel rollable onto the mount and have the bike be completely off the ground when mounted. After doing my first bike which required an adjustment, I was able to mount the others without problem. I don’t bother with the lower tire pad.

Easy to get the bikes in and out of the mounts. Nice to have the ability to swivel the bikes out of the way. Accommodates all tire sizes with one small issue, For 29" and 700c wheels the tire of the bike does not fit into the cutout at the wall end so the front wheel flops around, not a big issue though. Quick installation and heavy duty build quality.

Does the job well. Pros: Hefty construction, Lag bolts bolt vertically one above the other so no need to worry about not hitting the studs, Adjustable wheel rests fitting 29,26 and 20 for my needs. Easy to install, I recommend finding a stud and marking 16inch on centre across your desired wall. Cons: bottom pieces could have been more solid, as they are plastic.

These things are fine, but I could only make them work for some of my bikes. They fit gravel bikes, but, as another purchaser commented, don’t work well for road bikes. If you use them on the recommended size for a 700c tire, it will rest on/rub the fork. Not great for carbon. If you size them down, it rests on/rubs the frame. I’m considering voiding the warranty and drilling a size in between the two to hang my road bikes, but I can also see why other people wouldn’t want to. The description also says that they are not compatible with fenders, and they mean any fender. Even a small RockShox fender. I actually bought these to hang my mountain bikes, and figured surely a tiny 5” one wouldn’t be that much of an issue. It was. So it was fenders or hangers. Fenders won. So, if you don’t have skinny tires, or any sort of attachment on your fork, you will probably be fine. Edit: I wanted to take a second to update my review. After posting my original 3 star review the sell reached out to offer a refund, which I thought was great customer service. I do want to be clear that I was able to use the mounts, as I am actually trying to improve my storage of a relatively large number of bikes. They worked reasonably well for the bikes I did use them for. I also plan on modifying the mount (using a wood insert) to hang my road bikes. To be fair, I liked the functionality enough that I bought two more instead of pursuing the refund. While they will not hold the gendered mountain bikes I was hoping to, I rearranged my storage plan for these bikes. Because of the company reaching out to me, I’m bumping up my rating to 4 stars. While I understand that the design simply doesn’t allow for fenders, I would like to see changes made to the mount to allow for skinny 700c tires to allow use with road, track, or time trial bikes.

This is an excellent product, well built and works great! Be sure to mount it at a height specific to your bike. I have a gravel bike and a mountain bike so each mount is height specific. The goal is to keep it at the lowest height possible as long as the rear wheel doesn't hit the ground. As a previous viewer noted, place blocks on each side of the upper mount to keep the front wheel from flopping around.

This is a great way to efficiently use storage space. Very sturdy and strong. Install was straight forward, just followed the provided directions and got that perfect floor height for both bikes....also nice that they swing. Others have complained these racks won't work for 29'ers, but they do. Again, follow their directions and adjust the arms to suit your bike. A great purchase, and considerably cheaper than other brands.