MCMConcepts 2000mAh Square Battery Replacement for iPod Video/Classic Thin 5th-7th Gen

Fantastic replacement. Cable is the original size but because the battery is larger, it ends up being too long. Pretty easy fix for anyone who has ever worked in a device, just fold part of the long cable over onto itself, and give it a loose crease. Do not crease it hard or you likely will break the internal copper traces in the ribbon. I also used some double sided adhesive to get it to stick better where the only battery was. Fit perfectly with a thin 7th Gen using an imcort dual micro SD adapter for the drive replacement. I got over 60 hours of continuous music playback before it finally gave up (I had to go to bed so not sure on the exact, but I sent to bed with 8% left at the 60 hour mark) Works perfectly, and seems to hold a charge pretty well. Just don't trust the percentage in rockbox, it's rarely accurate and it's more an estimate

Fit perfectly in my 5.5 ipod with the i flash solo. Hardly need to charge my ipod after several days of use!

This battery actually works and it last for hours. The setup was a bit tricky, but gotten used to it. I bought a 3800 thick battery from the same seller and it blocked the rewind & fast-forward button and I accidentally broke the flex cable in the process of fixing it up and I accidentally made my OEM battery a spicey pillow, so it's all my mistakes. I ordered it and installed it into my now modified iPod classic 5.5th gen and it actually works. Turns on like normal and it does what it said. To install this; it'll take research of repairing skills, patience, and a lot of carefullness. Pry off the backplate, slide this under the flex cables of the lock switch & headphone jack, use painter's tape to make it stay in place, carefully slide it in the brown interlocker slot by the charging port, and done. It also fits well, unlike the 3800 thick one as memtioned earlier.

Battery fit perfectly in my iPod 5th gen, but there is one issue, The 2000mAh description is misleading, the battery is actually around 1000mAh, which i estimated by it's dimensions. This is just a Lithium polymer battery.

Switched out my old iPod battery with this one. It fit great with no problems. The battery life lasts long and the installation was easy. Would recommend.

Excellent product, fit perfectly in my Ipod 7th Classic in combination with my iflash Solo. The battery lasts a significant long time, I am going well over a well with light/moderate use and have roughly 40% battery power left.

Battery was packaged very carefully. The battery itself looked good and after installation it worked without issue.

I installed this upgraded battery in my iPod 5.5th Gen (30GB model) about a week ago, and I’m honestly blown away by the results. Installation was pretty easy if you’ve opened one of these iPods before — the battery fit fine, and everything closed up clean with no issues. No bulging, no loose parts, just a solid fit. The performance has been excellent. Since installing the new battery, I haven’t run out of charge once. I’ve used the iPod for hours at a time — mostly during walks and while working — and the battery just keeps going. I’ve barely even thought about charging it. Just syncing songs on the computer over the past few days has been enough to keep the battery topped up. This one simple upgrade brought my iPod back to life. It feels dependable again, like when it was brand new. If you’re still using a classic iPod and want to keep it going strong, this battery mod is 100% worth it. Highly recommended.

Excelente producto

Se ve como un buen producto, el tamaño y la capacidad corresponde a la página, pero apenas tengo unos días usando entonces no sé que tanto vaya a durar, esperemos que por lo menos varios años