OVERTURE Matte PLA 3D Printer Filament 1.75mm, Matt Surface & Low Warping Filament 1kg Spool (2.2 lbs), Accuracy +/- 0.02 mm, Fit Most FDM Printers (Matte Butter Yellow)

This filament prints beautifully and gives a smooth, matte surface that hides layer lines really well. It sticks nicely to the bed and has very little stringing once the settings are tuned. The color is rich and consistent throughout the spool. Great choice for aesthetic prints or display pieces — reliable and worth the price.

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping. Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed. For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers. I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong. If I run into any issues I'll update accordingly. Update 7 Days Later So i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm. Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

this filament is the best i've used, it prints very cleanly with minimal visible layer lines. my only complaint comes from the packing. i'm not sure if it was an issue with the factory or the packing warehouse but i know for sure that it wasn't a shipping issue because the other items it was packaged with were completely intact. the box and the filament spool itself were completely crushed. i was hoping that it was just the box that was destroyed so i didn't take a picture of it before i opened it, only after, so the box in the photo is slightly more bent into shape because i had trouble opening it. i find it hard to believe this was an issue with shipping because i've owned overture filament before and the vacuum sealed package is very heavy and tough. it would take a lot of force to destroy it in the condition i received it. i considered returning it but i didn't want to wait another few days/weeks to start on my project so i tried my best to flatten the edges of the spool. so far it hasn't had any issues on my printer despite that. i'm still giving it 5 stars considering this doesn't really effect the product itself and i've never had this issue with overture before, but this is something i wanted to share hoping overture or amazon become aware of this. if it was destroyed any further it would've been unusable.

This overture matte Pla is my true favorite of all PLAs. Not sensitive to moisture, very nice variety of colours, hide the layers, prints east and fast (have used them at 300mms without an issue), zero clogging problem. Overall, my favorite if all. Specially this colour wood, is fantastic for home decor. I printed this Montessori block toy for my baby girl and looks great with some fuzzy skin, people really think is wood.

I absolutely love overture but I just bought 3 spools and all 3 are a tangled mess it would be unusable if I wasn't able to sit and watch prints or unwind a lot of it. I still gave a 4 star because this is first time I have experienced this with this brand and prints turn out so nice and I love their matte colors, either way hopefully this doesn't happen again or often because it is a huge pain and I hate having to return stuff. Updated bought another spool and it showed up messed up again 3rd order like this and I don't have time to return and wait for another!!!!

Love this matte filament. I’d describe it as bubblegum pink in color. This filament is consistent and I rarely experience any misprints when I use it.

Great filament I love the Matt look does a good job at making the print look cleaner never had problems with the filament getting tangled.

So far the color is fine and true to the photo in Amazon . I usually love Overture filaments but this rating is for the reel. The reel it came on this time is fighting with my Anycubic Ace Pro. I have to constantly watch it because it is not smooth on the outside so hangs up. This is the first reel I have had these issues with. So far only an hour in and I have to constantly monitor it. I have used their other colors and they worked flawlessly, but I think this reel is defective. Hopefully I won’t run into this again because I love their filament itself. Just can’t babysit the reel advancement.

Manufacturer included some Easter eggs inside - an attachable print surface, and little measuring/removing tool for prints. PLA looks nicely manufactured. Quality goods!

Ich habe das TPU Highspeed Filament von OVERTURE in der Farbe leuchtblau auf einem Flashforge Adventurer 5M Pro getestet und bin insgesamt sehr zufrieden. Druckverhalten Das Filament lässt sich mit einer 0,4‑mm‑Düse bei 225°C Nozzle und 40°C Heizbett zuverlässig drucken, liefert aber auch bei 250°C noch vernünftige Ergebnisse (darüber habe ich nicht getestet). Die Haftung auf dem Druckbett ist sehr gut – teilweise fast zu gut. Besonders dünne Drucke haften so fest, dass das Ablösen schwierig sein kann und gelegentlich zu Beschädigungen führt. Supports lassen sich bei 0,31 mm Abstand ordentlich lösen, darunter kann es unter Umständen etwas schwiereiger werden. Allgemein sollten allzu filigrane Elemente, die Supports benötigen, vermieden werden. Materialeigenschaften Das Filament zeigt je nach Druckparametern sehr unterschiedliche mechanische Eigenschaften: - 15% Infill, 4 Walls: gut biegsam, erinnert an dicke Einmachgummis. - 7% Infill, 2 Walls: extrem weich und hochflexibel. Selbst nach starkem Biegen oder Quetschen kehrt das Material zuverlässig in seine ursprüngliche Form zurück – ideal für flexible, strapazierbare Bauteile. Leuchtkraft Das Material ist ein echtes Glow‑in‑the‑dark‑Filament: - bei Tageslicht wirkt das Filament weiß mit leichter Transparenz - im Dunkeln leuchtet es hellblau Am besten „lädt“ es sich durch direktes Sonnenlicht, danach leuchtet es die ganze Nacht hindurch gut sichtbar. Verpackung & Handling Die Verpackung war einwandfrei, der Versand schnell. Typisch für TPU zeigt das Material eine gewisse Feuchtigkeitsanfälligkeit, daher ist trockene Lagerung empfehlenswert. Fazit Ein hochwertiges TPU‑Highspeed-Filament mit starker Leuchtkraft, sehr guten Druckeigenschaften, hoher Flexibilität und beeindruckender Formstabilität. Die extrem gute Betthaftung bei dünnen Drucken ist der einzige erwähnenswerte Kritikpunkt, liegt aber eher am Material (TPU), denn am Hersteller/Produkt. Insgesamt ein vielseitiges und zuverlässiges Glow‑in‑the‑dark-Material für funktionale und dekorative Projekte.

セール時にホワイト・シルクを購入しました。 一見してわかるほど艶があるわけではないです。角度によっては安いホワイトABSに見えます。 その代わり、かどうかは分かりませんが、シルクのフィラメントにしては安定性がよく、薄くてもボロボロにはなりません。 普通のホワイトPLAと比べたら明らかにシルク感はあるので、ホワイトと組み合わせてアクセントをつけた造形はどうだろうかとアイデアを練っています。

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging

品質は上質かつ高強度にプリントできる コスパの良いフィラメントです。 BambuA1では印刷速度が80を超えた辺りから積層不良が目立つようになる為、 高速プリントは難しいと感じました。