Amazon Basics microSDXC Memory Card 128GB with Full Size Adapter A2 U3 Read Speed up to 100MB/s Black

一定のクオリティは担保されており、動作不良も現在ありまさん。コストパフォーマンスも高いため、スマートフォンにしよつしております。

Insta360 Go Ultra用に購入。 問題なく使用できています。転送速度も気になりません。

普通に使えます。ドラレコに使ってますけど何事もなく使えますね。

128GBも入るから、写真とか動画をいっぱい保存できて超安心📸💖 読み取りもめっちゃ速くて、スマホやパソコンでのデータ移動もストレスなし✨ アダプター付きだから、カメラでも使えるのが便利で嬉しい😊 コスパも良くて、容量多めのmicroSD欲しい人にはめっちゃおすすめです💫

スイッチ2用に探していたのですがこちらのSDカードは使えません。 スイッチ2に使用するにはExpressと書かれているタイプですのでご注意ください。

オズモポケット３用に買いました。問題なく作用しています。値段も手頃でよい買い物をしたと思います。

Used with steam deck works really well

プライベートブランドとはいえ他のメーカー品と遜色ない物です。ちゃんと高速で読み書きしています。

Ok

Chegou em otimas condições, não tive como testar muito mas consegui saber que funciona.

Been using it for 2 months now, have not faced any issue, looks good, nice quality, have not faced any data loss, supports most android phones that can support high memory.

This is a fairly (and surprisingly) decent Micro SD/uSD card reader from Amazon Basics that's reasonably well-made and for the most part works as expected without issues. It's reasonably small and compact although far from the slimmest that I've come across and tested due to its odd and slanted shape that's just weird. It has a typical plastic shell that's certainly not something to write home about; however, it does have a spring-loaded card slot, which is a surprise to me (and indeed a pleasant one at that). As for its dimension, it's about 25 mm in length at the shortest side and 29 mm at the longest. As for width, it's about 18 mm at the shortest and 23 mm at the widest. Finally, the thickness is about 11 mm; however, the slanted side has a length of 12 mm measured at the surface. As far as data transmission is concerned, it's able to provide the [nearly] max speed supported by the various Micro SD cards that I've tested and the best result is about 175.25 MB/s for read and 155.85 MB/s for write, which is again fairly good. This particular card reader also supports OTG that many others don't, so that's certainly a point in its favor. Before purchasing this, I tried about half a dozen UHS-I card readers from various well-known brands including Kingston, UGREEN, and TP-Link etc. just to name a few. However, most of them weren't able to achieve speeds faster than 104 MB/s (which is the max speed for UHS-I), and for the few that could go beyond 104 MB/s, they were capped at roughly 150 MB/s, which was weird. The max speed for UHS-I is 104 MB/s and that limit is increased to 156 MB/s (full-duplex) or 312 MB/s (half-duplex) for UHS-II; however that requires the use of an additional row of connectors on the cards as well as the card readers that relatively few have adopted even today. ★ In the meantime, proprietary technologies have been developed by SanDisk and others to bump up the existing 104 MB/s limit to something much higher, including DDR200 (170 MB/s) and DDR225 (200 MB/s) and so on. This is the ONLY card reader that I've tested in the last month that's actually able to achieve 175.25 MB/s (max 180 MB/s for the card in question) via UHS-I interface. Kingston used to have one that actually worked (from about 3+ yrs) but that's no longer the case with the new version that's available at the moment, so if you need a UHS-I card reader that actually works to go beyond 104 MB/s at the moment, this is THE card to get. ≡ Value All things considered, this is a fairly decent uSD/Micro SD card reader that's fairly small/compact and works as expected without issues. It's the ONLY UHS-I card reader (out of the half a dozen or so cards tried) that's able to go beyond 104 MB/s (max 200 MB/s claimed) imposed by the standard. I just wish that it has a slimmer and rectangular shell instead of one that's oval and slanted at the rear, which is just odd and weird. It's reasonably priced at $10 for what it provides and its overall build quality, features (i.e. DDR225, 200 MB/s), usability, versatility, and performance.

Bonjour achat avec dashcam