8" Heavy Duty Screw Removal Pliers, Combination Gripping Plier. Made in Japan. Side Cutting Jaws. PZ-59

All Right, All Right! I am Totally Satisfied with this tool! It Did Exactly as advertised! I was beginning to get Very frustrated,with my Toyota truck! I wanted a simple accessory for the gas cap, but it required to remove a factory installed screw( which I was warned was torqued on very hard) and yes mine was proving to be a challenge! I first tried with a heavy duty screwdriver only to start stripping it, tearing up the head, then I moved onto a small pair of Vise grips only to slip off time & again, further damaging the screw head. I was about to give up when I watched a short documentary of the inventor of these wonderful pliers! so at t'he end of my rope, I gave these a shot! hoping for the best! I was a little worried cause these are quite substantial 8" and the problem Screw was in a tight space(inside the gas cap compartment. I was considering the "Brute", but I wanted a pair of Regular sized Pliers! But because of its great design, these fit easily in that space. And Well It was love at first "Crack", of the offending Screw! It loossened with ease! No problem what so ever! Whew! I thought I was going to have to seek professional help ( the Stealer ship) to remove said screw. it was looking bleak as i tried the usual suspects(driver, pliers,& Vise grips)only tearing up the screwhead. That is until I got the MIGHTY Nejisaurus Rex! It probably saved me alot of $$$ & embarassment of taking it in, these worked like a charm! Thank God! nice handsome design, well constructed,I'm glad I went for these. They are very close in size to a "regular"set of pliers! Like said I wanted a grown up tool, not a miniture version, I also considered the Vampliers version, but opted for these( same manufacturer,same quality) and saved some money. I wish I had these years ago when I broke the heads off a couple of cheap screws on my prize Guitar. The teeth have superior Bite, and the grips are super comfortable & feel great! I will whole heartily Endorse & recommend Highly! I would definitely Purchase again if lost or stolen. You wont regret it, Get some Now, and save yourself time & worry.

These are excellent pliers and work great as linesman, their cutting ability is outstanding while maintaining portability in a compact package. They also work excellently on bolts and panel opening (love that feature of the curved jaw). These are easy on the hands and twist wires extremely well. I wouldn't recommend throwing out your Kleins though, due to what I assume is their better cutting angle/higher leverage along with smaller length these have a more challenging time stripping wire sheathing from the mouth than traditional 9" linesman designs but Im sure thats more my experience in technique with these pliers than the tool itself. Its a slight learning curve in that sense if you are used to ripping off wire sheathing with your linesman these will do it but need to be held in hand at a slightly different angle than 'normal', they work excellently with great cutting ability and I cannot overstate how awesome the jaw design is for accessing panels and doing general work. Also due to their more compact nature they make for a poorer hammer so keep your kleins around for knockouts and nail hitting. (These are nice pliers that have more capabilities than traditional linesmans, we all know we keep limited tools on us at work, these are a great addition. If you do mostly roughing in work youll probably use these for the tie in but hold on to your heavier 9" traditional linesmen as their mass is awesome to have when needed, these are light weight and easy to carry which is awesome for that but can be a downside if you need good ol smacking pliers) Totally recommend these, not instead of traditional linesmans (klein) but in addition, youll find yourself reaching for these far more often than the usual 9", the jaws and cutter are outstanding. Update a while later: these are still awesome! With confidence I can say they work great on wire from 24awg to 6awg and beyond the sheathing striping is a breeze once you know where to hold the pliers (I choke up on them more than I do with full size linesman) and they cut fantastically, outstanding pliers from delicate to robust jobs. You won’t regret it

Excellent product. Worked well on my daughter‘s Subaru; when I replaced her fuel pump on her 2014 Subaru CrossTrek, the stud nuts were corroded (on the studs) that held the fuel pump / ring flange in place on the fuel tank. Using this excellent tool, I was able to work the nuts loose and replace them with stainless steel nuts. The tool did not even look like it was used afterwards. Very good Japanese steel used on this product - I was an engineer during my career in the American aerospace and it is obviously to me that this tool was made with high quality carbon steel that was heat treated then tempered back properly. Considering the reasonable price of this tool, I am very impressed..

JÁ UTILIZEI VÁRIAS VEZES ESTE ALICATE E O RESULTADO É O SEGUINTE: GRANDE QUALIDADE MADE IN JAPAN NÃO EXISTE QUASE NADA IGUAL MUITO EFICAZ PREÇO ALTO (NÃO É CARO PARA A QUALIDADE QUE TEM) VALE BEM A COMPRA

Excellent quality tool. One of the best designed I have ever seen. No wonder it got an award. Totally worth it.

Lots of specialist functions. Beautifully made and styled. But don't throw away your old, sturdy plain fat flat nose pliers. Sometimes you just want to rip and twist some stuff, this one seems to be too delicate, or precious, for such rough stuff.

bon outil très robuste.

ENGINEERブランドは、高品質なプライヤーを製造しているようです。このモデルは扱いやすく、タフな印象があります。つぶれたネジも回せる特殊な構造になっており、かみ合わせの精度からも各パーツの製造品質の高さがうかがえます。耐久性については、現時点ではまだ判断できません。