YONICO Router Bits Pattern Bit Flush Trim 3/4-Inch Diameter 1/2-Inch Shank 14130

I have used this bit in guitar building and am very happy with the results. I don't know what else you could ask for in a bit, even if you spent a bunch more money. this is sharp, cuts well and is priced very well. the same bit can cost triple what this one costs if you go to the big box stores. I'll definitely be buying this brand again.

Good product. Have used their bits a few times and not had issues. Weekend warrior over hear.

I wouldn’t use this on hard wood and expect it to last long. It’s not the highest quality. But it works great and I had no issues on my soft woods and MDF. But it dulls easy in hard wood.

Very clean cut for routing out my router lift opening with a template.

It fit and worked perfectly. Very pleased.

The bit is very sharp and cuts well. However, the screw fell off after the first pass. I was able to put it back on and it fell again on the second pass.If they would have included the tool, maybe I could have tighten the screw back, but this is such a tiny screw that none of my tools fitUPDATE: the vendor reached out, checked what the problem was and sent me replacement parts to fix the problem. It is working great now and the customer service was impeccable

A good flush trim bit is pretty essential for most woodworkers. This bit can do the job, but I'd really suggest spending a little more for a better quality bit from Freud or Amana. My current project is some dining chairs in relatively soft, very straight-grained cherry and this low quality bit leaves lots of burning and tearout even when taking very shallow passes. I ordered a better Freud bit and the improvement was evident. In the attached pic half of the piece is routed with the cheap Yonico bit, and the other half with a better bit from Freud. The Yonico leaves burning and tearout everywhere, while the Freud bit leaves a glassy smooth surface even when routing against the grain.

Use twice now. Very sharp clean cuts. Quality is good and a very reasonable price.

Segunda vez que compro, medida muy necesaria en el taller.

La estoy usando para hacer mortajas y trabaja muy con corte muy limpio.

Great product for hobby level woodwork. No idea if it would be good enough for professional use.

Gambo da 1/4"avete bisogno di un Adattatore per mandrino di fresatura 6.35 lo consiglio un ottimo prodotto,Si è comportato beneConsegna sempre nei tempi previsti da amazon, impeccabile!

After reading some reviews, the first thing I did when receiving this bit before putting it to work was to check the bearing and pull out a magnifying glass to check the blades. The blades were flawless! The bearing seemed fine too, but I loosened the hold down and snugged it up a little tighter and now its to my liking.I have only tested it out on one piece so far and while I messed up, setting the wrong depth for the project, the bit cut impressively and no sign of change to the bit.All my bits are Freud, the rest I've given away, but after seeing the quality of this bit, there will be some Yonico in my connection too. They won't replace Freud, but they are perfect for those less used bits that we still need.