Bare Conductive Electric Paint Pen, 10ml

Very good

Awesome. Item received on 16 Sep 19.

good

Worked as expected

It's not quality as price, drying time is very long, manufacturer should improve drying time. Drawing track is not zero resistance.

This product works as advertised. It may not be the best solution for repairing a remote control, but you can certainly improve it. Here are the steps: 1. Open your remote control (watch a youtube if you have difficulty opening on your own) 2. Separate the rubber keypad from the circuit board. 3. Clean the circuit board and rubber keypad with rubbing alcohol using a paper towel or qtip. 4. Shine a bright light on both parts to ensure you have thoroughly removed all oils and debris. 5. Very carefully, put a small dab of the paint on each key. (you can use the tip to spread it thin or use a toothpick). 6. Once you have evenly spread the paint, let it dry (approx 1 hour or use a blow dryer on low speed for 15 mins). 7. Use the back of a toothpick or some small flat tool to carefully tap on each key to further flatten the paint. 8. Verify its not flaking off. If it comes off, repeat the steps to add more paint. 9. Let it dry again for another 15 mins. 10. Slowly put everything back together. testing: If you're remote fails the first time, it means there is a short with some small paint that stuck to the circuit board. You'll have to reopen and clean the affected parts and repeat paint steps. If it works, then don't slam on the keys. Just take it easy and it may last. If it causes trouble again, then repeat all steps. One suggestion would be that if you can work quickly, then maybe use super glue on the keys first before adding the paint. I haven't tried it, but it might hold better. Glue stick doesn't work well, and with no glue, the paint does not bond well with silicon rubber keys. For the folks that just need conductive paint, this paint works just fine for low voltage projects. Great value.

Sehr cooles produkt, vorallem wenn man etwas ausbessern möchte oder zb folien reparieren möchte.

Spilt coffee all over my keyboard and in removing the matrix sheets I tore one (stupid I know) and I used this to the broken connections on the sheets now it works like new :)

Je l’ai acheté pour réparer des pistes de circuit imprimé défectueuses. Ça a fonctionné !! Le temps de séchage est assez important et ce n’est pas si facile à déposer mais ça fonctionne !! C’est mieux que de jeter un appareil réparable :)

ファミコンのコントローラーのカーボンが剥げていたので購入。 コントローラーのカーボンを塗る位置の中央に細いマスキングテープをして 綿棒に少量付けて点描の要領で塗布すると良い感じに。 本当に少量で良いので全然減りません。 ただキャップが存在しないので口をクリップなどで留めておく必要があります。