HIAORS PZ19 19mm Carburetor Carb with Cable Choke Compatible with Taotao Coolster 110cc 125cc Apollo Sunl NST Coolsport Lifan Baja ATV Quad 4 Wheeler CRF50 DB14 DB27 4-Stroke Pit Dirt Bike Parts

Easy fix for our old go kart. Install is straight forward, and it started right up. Much less work than rebuilding the old cab, and price is cheap. Had to adjust the float level after riding as fuel was leaking out of the overflow tube. Not a big issue, but the float bowl screws were TIGHT!

I have 2 2016 Yamaha raptor 90s. Forget cleaning an old carburetor. I replaced both along with fresh batteries and non ethanol gas and they started right up and run like new. About 30 minutes for each and this is only my second time doing this. They fit perfectly. Had to adjust throttle screw on both which was easy. Highly suggest getting these. Ps non ethanol gas costs more but you’ll never clean a carburetor again.

Replaced PITA hand choke unit on an old 110cc quad. Needed a cable choke unit to return choke operation to the handle bar. Started right up, idle adjustment good. Must have a tad fatter jetting than most because it now moves my 230 lbs right out. Got this sketchy quad over 30 MPH really quick. The EV golf cart runs 25 and the quad will run away from it now. Keeping the kids off this one unless the throttle limit is cranked all the way in. Went from no start to zoom-zoom, better wear a helmet.

Needed new Carb due to me trying to tighten bowl screw to tight. I made it drip gas Metal is solf, so be very careful. New carb came , Bolted on 110cc Sung ATV. Started unit up, Ran excellent. Needed a slight adjustment on air - fuel needle. Comes with New top screw cap & 90 degree rubber throddle guide ( 3 inch ). 4 Star only because of the cheaper white metal used. But works great. John M.

Fit great for me back up and running

Installed on 2017 Yamaha Raptor 90. Tweaked mixture and set idle speed and works great. No problems with leakage.

I have bought 2 of these now. The first one worked pretty good for a while. But started running really rich. So I took it off to rejet it. First off the people that say it’s a perfect fit must have got a completely different carburetor than I got both times. The tube that the throttle cable goes into is about a half inch to long and hits the bottom of the gas tank. So when I tried to put the second one in that metal tube broke and pinched the throttle cable. So no this is not a perfect fit. The fox 70 needs a 90 degree bend out of the top of the carb and this one has a 45.

I had a non-running Yamaha Raptor 90 and even after I cleaned the carburetor, it still didn't run. I checked spark, fuel and compression, the main thing remaining was the carburetor. Rather than buying a rebuild kit, I chose to buy this carburetor for less than the cost of a rebuild kit because all the parts look the same even though no one confirmed its compatibility with the Yamaha Raptor 90. The quality is very good given the price here, and it takes only 10-15 minutes to replace if you know what you are doing. The throttle needle and spring is included but watching the video on the product helped me install it. The ATV started almost immediately after I replaced the carburetor. This is a 95% match to the original carburetor and only some minor fitment issue with the fuel supply line is a little loose. This might be a good path to go rather than cleaning and rebuilding the original carburetor.

I rebuilt and cleaned my OEM carb and it still would not idle properly even after cleaning it multiple times. I bought this carb and it bolted right up. Once installed it fire right up and idled better than when I first bought the quad.

en la imagen de la publicación el carburador dice diseñado o fabricado en japon y esta grabado en el cuerpo del mismo y al llegar dice china en cuanto materiales esta regular se ve algo frágil, aún lo estoy checando ya que la falla de mi moto persiste no se soluciono estoy deliberando si es el el de la falla (el nuevo)

Perfect for raptor 90 plug and play

Convient parfaitement

THe part fit perfectly and the engine started on the first try. All that was required was the expected adjusting of idle speed. A good product for the price and hopefully long life.