Moen L-1001 Waste King 1/2 HP Garbage Disposal with Power Cord

Compact and modern very easy to install. Everything needed was in the package, I was able to use my existing outlet flange as they appear to be a standard. The sink adapter that came with the unit is all you need, i've seen a number of reviews that suggest that you buy the Adapter to unit which would make the dusposal a lot lower taking up more space. The trick is to pop off the old adapter sometimes it has a set up that you need to remove first. That unit had a plug in the dishwasher connection that I had forgotten to take out which caused my dishwasher to stop working, after knocking the plug out the unit worked perfectly. I have not had the chance yet to test the disposal in real life, it is a lot quieter than the old one which started leaking when the internal motor seal went out. I chose this unit because it was a higher horsepower than our old 1/3 hp unit and it had good reviews in additionally the price was hard to beat. It took me 20 minutes to get those unit out and the new unit in, The only tool I needed was a screwdriver. I did not bother using plumbers putty on the sink, however I did use a screwdriver to just wipe off the old party then with a paper towel to clean it up before putting the new rubber gasket in the new sink insert in. After 3 1/2 years still runs great

Its super cheap, surprisingly very easy to install, much more powerful and more quieter than my previous more expensive garbage disposals. I was slightly worried about buying the cheapest disposal on amazon, But I figured Even if it breaks in a few years, its cheaper to buy 2 of these than 1 of the rival brand 1/2 HP disposals. I was very surprised on how quiet it is. No rumbling or shaking my countertop at all. To be fair, I dont really use the disposal all that much. Maybe on average just 20-30 seconds a day, but I can tell this does the job just very well. Its powerful and fast. I tested it out and it clears my drain within seconds. Not to mention its very easy to install. I was able to install it on a very old cast iron sink. There's a review that mentions that you cant install this on one of them, but thats just not true in my case. It uses mostly rubber gaskets so you dont have to worry about the difficult to install O-ring that come with most garbage disposals. Those O-rings are tricky to install and a nightmare to take off if you're replacing an old disposal. I really surprised and satisfied with this unit. I hope it lasts a while, but even if it doesnt, its still great for a DIY'er who's trying to get their feet wet with kitchen sink plumbing!

I've been using this for a few years now and it has held up really well. Installation was straightforward and it came with everything needed to get it up and running quickly. The power is impressive, strong enough to handle pretty much anything you throw at it without jamming or struggling, and the functionality has been flawless since day one. No odors coming from the sink either which is always a good sign. The one downside is the noise. It's louder than I expected, not the end of the world but definitely something you notice every time you flip the switch. If noise is a concern for you just keep that in mind. For the price though you're getting a solid, reliable disposal that gets the job done year after year. Worth it.

I purchased and installed this new Waste King 1/2hp disposal after removing a 25 year old Waste King 1/3hp disposal. It made it easier as plumbing lined up and height was same under my cabinet. I followed directions closely and watched online video. Only recommendation, be sure the rubber cushion mount is seated into the groove correctly. I used support to hold up disposal and had adequate lighting and tools. I am a 79 year old female and took on the challenge. Figured if I failed I would then call a plumber. Disposal was about 8 pounds so not too heavy for me. First time I ever installed a disposal. Took me about 90 minutes as I worked slowly and double checked everything. All works perfectly, no leaks, no wiring involved as cord is already attached. Like this disposal very much because if I dropped something into it, it has a wide enough opening for my hand to fit to retrieve object, whereas, other makers have smaller openings. Also, was able to complete installation more easily because my cabinet had easy access whereas I was not having to lay on my back to install. Thank you

If you are desperately looking for a new garbage disposal for a DIY installation, do yourself a favor and try this one out! I am not a professional plumber but I could set this up myself.. not without any trouble though. It wasn't this garbage disposal that was giving me the trouble, it was removing the old unit that took me longer than expected. I had a common 3 bolt type disposal and taking it out had me use more force than I anticipated. But eventually I could take it out with the help of the two screwdrivers and a piler. Be careful not to damage your pipes and kitchen sink when you remove your old unit. Be sure to disconnect the pipes first before twisting your old unit out or you could end up damaging the pipes before the installation even begins. Anyway, back to the product review, the instructions were clear, and it fits perfectly into the kitchen sink. It's compact and much thinner than my old unit. The quietness of this machine is impressive, it is so much quieter compared to my old unit. I was provided with all the tools I needed except for one, which is plumber putty, you will need to purchase that to seal the gap between the sink and the disposal to prevent water leaks. You can follow the instructions manual it provided but I would recommend watching the video on YouTube "How to replace a garbage disposal by LRN2DIY" He uses exactly the same brand but just different HP, but instructions are pretty much the same. Highly recommended! If a first time like me can do it, you can too!

I bought the hugest one of these at Costco 17 years ago. Finally gave out. Got this one, smaller, more under sink room and works just fine. Don't notice a difference at all.

Waste King L-1001 Legend Series 1/2 HP Continuous Feed Operation Waste Disposer This is a great product and I can highly recommend it. There are pros and cons like everything else: Pros: compact size, easy to install, ships with everything you'll need in the box, removable splash guard, reset button located in the front of unit, 3 prong power cord, 2 year warranty. Cons: Somewhat noise during operation, not a direct replacement to other brands mount assembly, does not have the wrench hole on the bottom in case it ever jams (will need to use a wood spoon or broom handle if ever happens). The box comes with everything you'll need to install it, including a rubber gasket for S.S. sinks. I found it very easy to install and I'm very satisfied with the final result. Initially I planned to buy a unit that I could re-use the mount assembly that is already installed on the sink but removing the old one and cleaning up was the part that took longer. Installing the new one was a breeze - no plumber putty needed if installing on S.S. sinks. The unit comes wired with a three prong power cord - you'll need an switched outlet under the sink and I recommend it. My house had a direct wire from the wall to the old disposer and I just installed a box with an outlet on it. It gives you peace of mind to unplug the disposer anytime you drop something inside it and need to get your hand there to remove the object. This unit will mount a bit higher than my old one under the sink so the discharge elbow pipe (included) will be about 2 inches high but it still fit with my old plumbing without any changes. THIS UNIT IS NOT SOUND INSULATED, THEREFORE THE SMALL SIZE. It is noisier than my old one with a low frequency rumble but I find the tradeoff between space saving under the sink and the 5 seconds noise acceptable. If you are worried about that look for the larger sound insulated units instead and you won't have any worries. This unit does not have that Allen wrench hole on the bottom in case it jams. The manual recommends to remove the splash guard - it slides right on and off - and use a broom handle to clear the jam. I found the removable splash guard a nice touch - it can look bad after a while and it is easy to order a $3 replacement and just slide it in. You can also easily remove it to fit your hand inside to pick something you dropped there. It also comes with a stopper included in the box. The mount assembly (the black part on the picture that connects to the sink) is made of hard plastic, however the part that is visible inside the sink has a S.S. top metal ring built in. It looks and feels of very good quality. The reset button is located in front of the unit, very easy to reach in case it ever pops out. The whole package comes in a box without any messy foam; an excellent English/Spanish/French paper manual included, 800 number in case of installation doubts and even on-line video of the installation on the manufacturer website. You may or may not use it with a dishwasher, just remove the plug if you want to install the dishwasher discharge hose. Overall, I'm satisfied and well recommend this unit to most households where sound during the operation is not an issue. Waste King L-1001 Legend Series 1/2 HP Continuous Feed Operation Waste Disposer

They went out of their way to make removing the power cord and hardwiring this beast as difficult as they possibly could. First, the wire nuts are crimped so that you can't simply unscrew them like you can on every other brand. So now you have to cut and strip the wire, which is fine except they make no mention of needing wire strippers in the directions. Speaking of directions, there basically are none for hardwiring. The only thing it does say is either sarcastic or meant to mock you: "pull out the existing power cord and connect the hardwired power". That's it. That's all you get. And what's worse is that removing the existing power cord is so difficult that you're probably going to damage the unit if you try. Check YouTube and you'll find video after video of plumbers remarking at how insanely difficult it is to remove the power cord. Honestly, the installation experience is so bad for hardwired setups that you shouldn't even attempt it in the normal way. I did it successfully and I still regret it. Here are some much less hazardous alternatives: 1. Just splice the wire somewhere along the line. Use the existing cord and just cut it anywhere and wire it up to your power line. 2. Install an outlet at the end of your power line. This is the right way to do things anyhow. Besides, a j-box and faceplate won't set you back more than $10 and now you have a real outlet that will make installing that air switch or RO setup or whatever you want later on so much easier. 3. Buy solar panels, batteries, and power distribution unit and plug into that. Now you can run you disposal for free and it's still easier than trying to remove that god-forsaken power cord! 😉 But other than that, the rest of the install is pretty easy except it's weird that they don't just use the standard 3-screw mount like everyone else, thus forcing you to change every single component. The other thing to look out for if you have a straight horizontal drain pipe coming from the disposal to the main drain line (above the U-trap) is that this disposal is probably slightly narrower than the one you're replacing, so you might find yourself about 1/4" too short to reconnect the pipe. And good luck finding a replacement pipe with that flange on the end like the one you have. Those are apparently only sold with disposals and this one doesn't include a straight pipe (it does include a 90-degree pipe). And good luck finding that pipe size too. It's 1 1/8" for some sadistic reason. What I ended up doing was taking a 2" length of 3/4" PVC, which happens to fit perfectly inside the abomination-sized PVC. Cut the existing pipe about halfway, insert the 3/4", fit the pipe, then cover and seal the gap with JB Weld putty. You could also use a waterproof adhesive caulk or PVC glue, but I liked the way the putty fills the gap completely. If I could be bothered to paint it, no one would ever know the pipe had been monkeyed with at all. Note that it would be better to use a PVC coupler in order to avoid narrowing the pipe internally and creating what is likely to be a clog hazard at some point in the future. But I couldn't find one at Home Depot that fit this crazy pipe size. You'll probably have to go to a specialty plumbing supply place to get one. And I know you probably have the same situation going on because the included 90-degree pipe is the same crazy size. And woe unto you if you try to change it. You'll end up having to replumb the entire sink and then you'll still need to find an adapter that likely doesn't exist to connect into the pipe in the wall. Hope that helps walk you through everything I know of that can go wrong.

Item is very well packaged and appears good, however I had to return it as it doesn’t fit my needs. Return process was very smooth and pleasant

This "garbage disposal" works well as an apple masher. There are many examples of using them for this purpose on the internet; I chose this one because it looked simple to mount and use, and was inexpensive. Perhaps the best feature of it is that it hasn't over-heated and shut itself off. It just keeps running although I am feeding apples continuously into it. It mounted easily, and I have the discharge pipe feeding into a larger piece of new PVC pipe to the bucket below. It is vibration-free, and easy and efficient to use. It uses a standard 3-prong 120V electrical connection. The first picture is of the basic set-up, while the second picture shows the full set-up, complete with mash. (The plastic knife acts as a wedge to keep the PVC pipe in place. It is easy to clean - I just run water from a garden hose into it. The masher is easy to disassemble although the grinding surface cannot be taken off (remember, these things are not meant to be maintained by the user). I am thoroughly pleased with it for this purpose.

快適です。 果物のタネは詰まります。

Es el primer triturador que compro y la verdad tenia mis dudas pero estoy muy contento, a instalación como tal, no fue compleja, su sistema rápido de montaje es sumamente sencillo, las instrucciones vienen en español, son claras y bien explicadas, Donde tuve complicaciones fue en la adaptación al desagüe, pues el tubo de salida resulto ser un poco mas pequeño que la tubería original, eso si fu un reto. Pero en home depot encontré un adaptador que quedo perfecto. Del funcionamiento, es genial, he reducido la cantidad de basura orgánica de manera descomunal. Del ruido, desde que lo enciendes el ruido de funcionamiento es mínimo, pero aumenta dependiendo con que lo alimentes, con el tiempo te familiarizas con el sonido del triturador y así sera fácil detectar si hay algo adentro que no debe de estar. (y pasara). De a limpieza, es muy difícil a simple vista ver si hay residuos o no que se quedaron en algún lugar. Hay en el mercado un cepillo especial para darle una tallada a todos los recovecos, y varios productos mas, Lo que a mi me ha resultado, es triturar un limón de vez en cuando. y hasta el momento sin olores raros ni nada por el estilo, Si lo estas pensando, dale una oportunidad a este tipo de electrodomésticos, que pueden parecer caros, pero son muy redituables en su uso.

Dudo que haya uno mejor en este rango de precio (apenas arriba de los MXN$1,000). Otros modelos superiores y más caros de la misma marca ya traen aislamiento acústico, por lo que imaginé que quizá este sería un poco ruidoso. No es el caso. Obviamente un motor giratorio potente siempre hará un poco de ruido, pero si se instala correctamente, lo único que se percibe es vibración. El ruido depende un poco de lo que uno le vacíe para triturar, pero me parece que incluso cualquier licuadora hace mucho más ruido. Lo único adicional que se tuvo que hacer es que en mi caso particular no había una toma de corriente lo suficientemente cercana, y se tuvo que hacer una instalación completa y bien hecha de dicha toma de energía. De ahí en fuera, todo fue fácil y lo más recomendable es considerar su tamaño antes de instalar. En realidad es pequeño, sobre todo comparado a otros trituradores, pero un triturador siempre ocupará más espacio que el simple céspol de desagüe. MUY, muy recomendable instalarle un Kit de interruptor de aire, como el de marca Cleesink, para que sea más fácil encenderlo y apagarlo con la seguridad de que no habrá energía eléctrica ni siquiera cerca de las manos mojadas. Marca y modelo totalmente recomendables 👍🏻