DEWALT Drill Press, Magnetic, 2-inch, 10-Amp with 2-Speed Setting (DWE1622K)

Absolutely great tool. Tons of power, the gibs are nice and snug, all the parts fit... I've used a number of other mag drills. Most recently an Evolution and a Jancy Slugger. This is a better tool by far. To those who are complaining about wobble in the quick release either got a bad fit, have damaged/worn out cutters, or just have no idea what this tool is for. The new annular cutters I bought fit perfectly in the quick release and have very little runout. This is NOT a drill press or a milling machine. A few thousandths of runout is normal and acceptable in this kind of tool. That said, it drills VERY true. So far I've punched holes in a bunch of 1/4 and 3/8 mild plate, flange and web of a 10W22, and a bunch of smaller stuff. Absolutely zero complaints. Quick release handle is a great feature. By moving the drill body up on the slide you can use the included 1/2" chuck and NORMAL length twist drill bits. No need to buy a set of stubbies just for this tool. That's a big deal and a huge savings. Mag base grips well and holds the drill in any position. Travel on the powerhead is about 4" so plenty to drill holes in as thick a material as you have bits/cutters for. Overall I couldn't be happier. There are bigger/badder units out there but they are in the $2500 and up price range. For under a grand this is the one.

This mag drill is awesome. I bought this for my welding department and it is going to save a lot of time. It cuts clean accurate holes that are straight with no burr. The cutting oil system works well. I don't have to worry about my guys forgetting to apply oil. I would buy it again in a heartbeat.

Very nice drill, magnetic hold is very strong, easy to use, storage case is great especially for taking into the job site etc.

This mag drill performs great whether using annular cutters or the drill chuck. The 2speed power function is good for your intended application. The magnet holds as advertised. I made a mount for it and use a 4” drill press vise. The oil tank is a bit screwy when empty, but works ok. I don’t plan to use the drill overhead, so am going to solid mount the tank. Overall a great product !!

I have 3 of these mag drills and they work perfectly for years and can drill through some serious thick steel. Don’t waste ur money on any other drills

excelente producto muy bueno

Good mag drill for the money. This is not a tool for precision work but it’s for great general construction work. There is wobble in the chuck, especially if you use the included drill chuck adapter. I run a small metal fab/welding shop and use this mag drill a lot for clearance holes with drill bits and slugger bits. I have not damaged a slugger bit with the chuck wobble, but I see how that could happen and slugger bits are pricey. If close tolerances are required, this is not the mag drill for the job but no other complaints. Has worked great under frequent use

These things are so handy. Bought one and tried it out in a fab shop and it has worked great so I bought a 2nd one for the guys to use. I didn't realize how often we'd use it and wish I'd have bought it years ago. Edit: bought a 3rd one now. First one has lasted 3 years without issue besides one of my guys knocking it off the table and bending the arbor. Bought replacement parts and have been using it since.