Frankford Arsenal Platinum Series Case Trim and Prep System with Hardened High Speed Steel Chamfer Debur Tool and Primer Pocket Scrapers with Trimmer

Extremely nice quality of life item for reloaders. Honestly it’s kind of expensive for what it is in my opinion, but I’m glad I bought it, and would by it again. All of the things it does can be done with cheaper tools and more manual labor, but this streamlines the process and makes it easier. Pretty impressed with Frankford Arsenal reloading items purchased in 2023 - 2025, all seem to be a good quality and work as advertised.

I've read just about every review for this product. I started with the "1 star" all the way to "5 stars". At the end of the day, and after receiving the FA Platinum case trimmer/prep center just yesterday, I've come to the conclusion that it can be a good, solid and productive addition to my reloading bench! There is no magic, lightning speed method to fully process rifle or pistol brass unless you've won the lottery and can afford industrial equipment. I've already processed a couple hundred 223 cases (trim, chamfer, deburr) with this trimmer. It IS very accurate (so far). The reason I said "so far" is because I've yet to know the longevity of the cutter head. I do know that if a piece of brass needs excessive trimming, I'll push it on the chamfer & deburr attachments for a few seconds and THEN trim. This sounds like it might take more time but actually speeds up AND saves on cutter blades (IMHO). So in right under 3.5 minutes I can process 10 cases which equates to 1000 in right under 6 hours. I can deal with that! Evidently FA must have corrected the "wobbling" or "run out" on these things because every one of the case mouths are pretty dang square. You cannot push too hard but just hard enough to feel the disconnection between the cutter head and case mouth. The ONLY thing I would want to see in future production of this trimmer is to speed the RPM a bit? I will eventually purchase the RCBS carbide 8-32 (3/16) carbide cutter to maximize life. But I'm real happy with this trimmer!

This thing is AWESOME. Works great, consistent and makes the whole prep process so much smoother. Anyone saying its inconsistent i guarantee you doesnt measure their shoulder length on their cases. Its physically near impossible to have different cut lengths if your shoulders are consistent. I love it

Great product! It worked good for me and saved a little of time in prepping cases for reloading.

I am pretty impressed with this case trim and prep center. It is pretty simple, and horribly boring to use. Case prep is not a big favorite of mine. This case prep center is easy to use. Set up took me about 5 minutes. The longest part of the 5 minutes was adjusting the shoulder length for a proper cut of the case. The cutter is HSS, I would much rather see it be a carbide cutter. Frankford says the HSS cutter should last for thousands of cuts, well I guess I need to start searching for a carbide cutter now because I have already done a couple of thousand cuts. The process is simple, I case check the round, if its good, I just clean the primer pocket by holding it against the primer pocket cleaner for about 1 second, then it gets thrown into the "Done" bin. If the case is too long I slide it into the cutter, using medium force and hold it until it stops cutting (based on noise and feel) I then hold it on the internal deburring head for about 1 second, then onto the external deburring head for about 1 second, then I clean the primer pocket, case check it to make sure its good, then toss it into my "Done" bin. The process is really that simple and easy. It is also god-awful boring. After doing about 50 I am starting to think of other projects I would rather be doing, like cleaning gutters. After a few hundred I would rather be knocking down that huge hornets nest, the one that's as big as a basketball and hanging about 30 feet in the air on my maple tree. And let me tell you if I am thinking about doing that instead I am seriously bored. While I am describing it as boring, this is a simple machine that works well. The noise level is not bad either. The only negative I can think of, other than it being boring, is the cutter should be carbide. I tried to find a replacement carbide cutter from Frankford but could not find one. I will search one elsewhere.

Product is great and couldn't be happier which is for the 5 starts. Shipping/handling I would give 2 stars . You would have thought it would have been placed inside an Amazon box( my Hornady AP that was delivered the same time) but this was sent in its original packaging. This had more dents than a Nissian Altima driven by a teenager and the lid to the package was unsecured and looked to have been opened in transit. Luckily, the contents are there and product is fine. I'm just one of those people that like to retain the original packaging for later use. Just be aware if you order that it might arrive like this.

Work great, and once you learn the tricks with setting up trimmer, can consistently get cases +\- .002” in length. Will not trim .50 BMG; haven’t found any powered trimmer that will.

I love to reload but I hate case prep. I read the reviews on all the Case Prep Centers on the market from all the big names. Most of them probably do a fair job. The reviews made it sound like the Franklin Arsenal did them all the best but there weren't many reviews. I reload on a Dillon Press because of the quality. Dillon isn't the cheapest by far but it is considered the best by many including me. So what is a Dillon guy doing with a Franklin Arsenal Prep Center? I didn't switch to Dillon because of the name. Don't let the Franklin Arsenal name turn you away. I have a Franklin Arsenal Tumbler that was a good price and has gone strong for years so I wasn't afraid to give this a try. Especially since it's through Amazon! I'm sure glad I did and I believe you will be also. I have used 5 different case trimmers and the best by far was the World's Finest Trimmer until this came along. This is a huge improvement for several important reasons. a) You don't have to chuck it in a drill and put the drill in a mount to keep it steady. b) It turns at a correct slower rpm so brass is better contained and the noise level is more comfortable. It doesn't remove as much metal as other tools do in a fast drill so your cases should last longer. c) You can stand it on end and let gravity help you. Very important when doing hundreds of cases. d) And the most important and best difference is you can trim, chamfer and deburr with a single grip on the case. Pick up the case and do all three operations and never change your grip. Yeah, this saves time! e) I can do three operations in about five seconds per case. If you are agile with good eyes you might shave a second or two off this time. f) It also cleans the primer pocket in a second but you do have to flip the case over g) It trims almost any cartridge without spending more bucks on additional tools h) It only takes a few seconds to set up and adjust i) It comes with all of the cutting tools. If it holds up for the long haul it will be the best reloading investment since I went Dillon Blue. I wear a rubber palmed cotton glove. I like to be above the trimmer to make it easier. As with most trimmers, you can close your eyes and feel when each step is completed. The only way it could be easier would be for someone else to do it for you. Any volunteers? Case prep is still the longest and hardest part of reloading but it just got a whole lot better and faster. I hope this review helps you.

Excelente Ajudou muito

I should have bought one years ago. Quiet enough to run without annoying the neighbours and powerful enough to get the job done. In the UK this US version runs from my UK 110V site transformer with the correct fly lead and RCD that I already had.

Works great and very accurate , make sure to warm it up for a few hours, keep it away from air draft , Had a problem with the first one but Frankoford Arseneal's customer service is amazing and they sent a replacement under a week , and I'm in Canada, definitely recommended.

Super gelaufen. Alles was auf dem Foto war ist im Set enthalten gewesen. Schnelle Lieferung zwar mit 30 Euro Aufpreis aber egal. Das Gerät hat 110 Volt und einen US Stecker. Wenn man aber nicht auf den Kopf gefallen ist kauft man sich einfach einen Umwandler für 40 Euro und spart sich mit dem ganzen Set inkl dem Wandler mindestens 200 Euro im Vergleich zu den Geräten was es hier in D zu kaufen gibt. Die selben Geräte nur mit EU Ausführung kosten hier ca 440 bis 500 Euro. Heute Abend probiere ich aus wie es funktioniert. Wie gesagt alles was auf den Fotos zu sehen ist ist auch im Set.

This makes case trimming and primer pocket reaming a cake walk compared to using a drill like i was doing before. Additionally, I would like to praise Frankford arsenal work not price gouging customers as others have on Amazon. this product has increased in price 23% in 2 years which is fair, compared to some Lee components I have bought that have went up over 60% in a few months.