Indoor Replacement Power Supply Cord - Durable Medium-Duty Round Cable - SJTW Cord - 14 Gauge - 3 Conductor - Black - 9 Foot

Good quality pigtail, highly recommended

Works great for a replacement cord for power tools or older electronics that don’t have a ground but need a heavy duty cord. The plug looks heavy duty so it should last for years. I have a similar style cord possibly the same manufacturer on one of my 1920s Emerson fans that was put on in 2007 and it’s still in good shape with heavy use.

Repaired very old air compressor wiring with this cord!

I purchased this replacement cord for use in a project where I needed the capability to carry at least 10 amps and also a weather resistant cover. This replacement cord met those requirements and was priced reasonably. This cord is UL listed (as are most cords these days..) and carries the designation of SJTW which indicates a stranded cord rated up to 300 volts with thermoplastic insulaton and weather resistant for outdoor use. The cord uses 14 gauge wire so it is rated for 15 amps which more than met my requirements. Because it is a fairly heavy cord, it is also fairly stiff. This would not be a good cord for use on items where flexibility is a paramount concern. For my use on this project it fits the bill perfectly. The plug on the cord is a molded one like almost all cords these days. It is designed as a "replacement" cord for use on small power tools so I suspect it will survive most common usages. So, four stars for a good utilitarian power cord. Absolutely nothing wrong with it at all. Nothing dramatic about it either...Perfectly satisfactory.

This is SJTW -- SJ = General use, 300V; T = Thermoplastic coating (elastomer rubber and fairly flexible), and W = weather resistant. The other key ingredients are wire size and temperature rating. This product has 14awg internal wires. This should be good for a 13-15A rating, depending on the environment of the wire. It is rated 75C, which is a lower rating. Finally, of course, it is stranded wire. Note, for some appliance wires, the wires are within an insulating sleeve, with paper protection of each individual wire. This cord is molded around the wires, making it somewhat more difficult to strip to a longer length. The standard to which it was tested was CuL, which is a UL standard acceptable in US and Canada. It has a molded NEMA 5-15P, which will fit any "standard" 15A or 20A receptacle (5-15R, 5-20R). The wire itself is good for 120VAC, but NOT 240 or higher. Bottom line is that this is an adequate cord for its stated purpose.

This unit helped me recondition Grandma's ancient 70s electric skillet (with a cord/plug that was getting hot to the touch). Now, the skillet has a new life and is SAFELY cooking Grandma's top-secret fried chicken recipe for the next generation.

I inherited my fathers ancient (by my terms) Sears craftsman 1/2hp bench grinder. I think it was made in the 1950's. the cord was really short and showed abuse over the years, and had cloth covered wires. After some amazon searching and looking at the original manual, this fit the bill. For initial current draw, the 14ga wire was suitable. The added safety of this having a ground, as opposed to the original cord which was 2 prong, was a plus. I added an internal strain relief clamp inside the base of the grinder so the cord will not pull out. Hope this will give me as many years as he had on the original wire!

Worked very nice, the wire jacket is very strong! The wire was used for an irrigation controller and did very well.

I needed a new power cable for my Air Fryer whose prongs had gotten loose over years of usage and kids pulling the plug out of the wall. Finally the prongs broke their contact with the internal wire and was sporadic in powering up the unit. I was not sure about the amperage of this cable as the product description lists 85W for a 16/2 cable. The paper sleeve it arrived with lists as 13A, 125V, 1625W (see image) This cable is polarized! That means the one prong is wider than the other. If your existing/old cable is also polarized make sure to match your polarity. Wider prong is the Neutral (white), the narrow prong is the Hot (black) Time will tell, but seems to be very good and heavy duty, especially for kitchen appliances.

Quality cord. Only needed a two wire cord, but for this price it's hard to go wrong, as most two wire cords are more expense or often have smaller gauge wire.

Le quedo excelente a mi maquina.

Super replacement cord, excellent quality, will definitely reorder when needed

I ordered this Southwire replacement power cord to fix a broken cord on my older heat gun, and it couldn’t have worked out better! The length was just right, and the gauge matched perfectly with the original. Installation was straightforward, and now my tool works like new again. You can feel the quality of this cord; it’s sturdy, well-made, and I’m confident it’ll last for years to come. Highly recommend this for anyone needing a reliable replacement power cord!