7443/7440 LED Bulbs

I recently upgraded my car’s tail and brake lights with the AUXITO 7440/7443 Red LED bulbs, and I’m really impressed! The installation was super easy, plug-and-play with no hassle at all. They fit perfectly in my sockets and didn’t require any modifications. The brightness is excellent. The brake lights are very noticeable, which gives me confidence that other drivers can see me clearly, especially at night or in rainy conditions. The red color is vibrant and consistent, and I haven’t experienced any flickering so far. Overall, these bulbs feel high quality and a noticeable upgrade over the stock halogens. I’d definitely recommend them to anyone looking to improve visibility and style for their tail or brake lights.

This is a quality product with some great brightness. The plug-in factor is essentially the same, so it was easy to install them as new brake lights in my 2003 Acura MDX. Therein lies the challenge. Once I replaced my old incandescent bulbs with these for my brake lights, my cruise control quit working and my "brake light" dashboard indicator illuminated nonstop. With a bit of quick web searching, I discovered that due to the difference use of current, these essentially "trick" the cruise control system into thinking I am constantly braking. In summary, these are a great buy to replace bulbs, but NOT brake lights. The product advertisement should state that implicitly. They are currently sitting in my drawer with no use because I had to go back to cheaper and less bright incandescent bulbs to fix the cruise control and brake light indicator issues.

These AUXITO 7440/7443 red LEDs are a noticeable improvement over the stock bulbs. The color is a true deep red, and the brightness is strong enough to make brake lights stand out without looking overly harsh. Installation was quick and they seated properly with no flicker or hyper‑flash in my setup. Build quality is decent, though not as heavy or premium‑feeling as some higher‑end LEDs. They run cool and work well so far, but long‑term durability is still something I’ll be watching. They’re “super bright,” but don’t expect a dramatic jump unless your old bulbs were really worn out. Overall, they’re a clean, affordable upgrade that improves visibility and gives the car a more modern look. Just keep expectations realistic about lifespan.

I just installed the AUXITO Upgraded 1157 LED Bulb (Amber Yellow) in my 2009 Harley Street Glide, and I’m extremely impressed with the results. These bulbs are insanely bright — claimed 400% brighter, and they definitely are brighter than my old stock bulbs. The amber/yellow output is crisp and vibrant, making my bike much more noticeable to other drivers, especially in daylight and low-light conditions. Whether I’m signaling or braking, these LEDs are easy to see from a distance—adding an extra layer of safety on the road. Installation was a breeze. The bulbs plugged right in with no modifications needed. They sit securely and look clean in the housings with no size issues. One of the best parts? On my 2009 Street Glide, these bulbs work perfectly with no hyperflashing at all. They communicate with the stock wiring just fine, and I didn’t have to add any resistors or relays to fix rapid flash issues. That saved me time and guesswork, and it’s exactly what I was hoping for. If you ride a Harley (or any bike/car that uses 1157/2057/2357/7528/BAY15D bulbs) and want a bright, reliable LED upgrade, the AUXITO Upgraded Amber Yellow bulbs are absolutely worth it. Great visibility, plug-and-play installation, and no annoying hyperflash — highly recommended!

Application: 2014 Tacoma, brake lights/stop lights and turn signal bulbs. Tail Lights: Three stars... That's the average between their initial 5 star when working and now, three months later when one has failed. They're incredibly bright, and have an automatic 3 flash as you apply the brakes before going to a steady light. It is unfortunate one has failed, but even still they're worth replacing if you drive in a place where folks like to ignore your indicators. Turn Signals: As with the tail lights, these are also incredibly bright. The instant-on WILL get your attention. I initially put these in the rear and everything was fine. When I swapped the front ones they started near-hyper flashing. I thought they had enough resistance. Oddly, they work fine as hazard lights (the hazard circuit must be a timed circuit instead of resistance based like the signal circuit is). IMO the rear signals are the important ones for most of your driving and if you want inexpensive but extremely visible lights, these are the ticket. Just either be prepared to install a resistor if you want them on all 4 corners or to live with hyper-flashing... which may make them more noticeable. I have ordered the newer version of both of these lights. The new signal lights claim to have enough resistance that hyper-flashing is a non-issue, and I'm hoping the newer design for the tail lights will be more robust.

Bright, maybe too bright. I used these to upgrade my tail lights/brake lights. They are so bright when my taillights are on but when I use the brake you can barely tell the brake light is on. They work well when you have the taillights off

2018 Toyota Corolla SE. The Map and vanity lights fit perfectly. The Dome lights are a bit bigger doesn't fit perfectly. Don't shove it in just enough for it to work. Over all it was easy to replace. I like the way the lights are bright and icey blue. It's been about a week and working fine.

Lights are great super bright, not very orange more of an amber color but that’s how they described them. Installed on my 2016 ford escape. BE AWARE they do not draw enough power so they hyper flash, that’s only reason i didn’t give them 5 stars. I’m sure they work on other cars Fords are just really picky

So nice and pretty light

Exactly as promised and delivered quickly. A++++

Lamps fit perfectly on my 2020 Jeep Grand Cherokee Altitude. Please be aware that these bulbs only fit the outside reverse lights and will not work with the inner parking lights. Installation was quick and easy, flathead screwdriver is all you need.

They work very well but you may need to put a resistor in the bulb socket to stop lt from flashing fast

Installé sur un Honda CR-V 2016 Éclairage très fort et couleur blanc pur. C'est exactement ce que je recherchais. Installés depuis environ 3 mois; j'espère qu'ils seront durables. Je recommande!