3D Printer UV Resin Curing Light with Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

Got this to cure resin prints, the little turntable is a bonus over other similar products, and it does work decently well. Just remember to coat the box or such in aluminum foil to help reflect it to the top/bottom and all of the minis for better results, and also get some UV glasses rated for the 405 range for safety. It's a pretty bright light. Only real complain with it was that the way the buttons designed, it keeps snapping and trapping bits of my rubber/nitrile gloves when I click the switch with them on (always have them on when resin working). There's a slight gap that closes next to the switch when it closes to one side, caught my glove in that almost every time! Still, just a minor annoyance that gives it character, overall works like a charm and does exactly what it say's it would for a good price.

Does the trick. Cheap and dirty. My only complaint if you want to call it that, is that the turntable is a bit small. Not sure what the weight limit would be on this thing, but it does do the job. The UV light is very powerful and bright.

Love this light. Simple, small and powerful. Unlike others, for my purposes the rotating disc is perfect. If you do need a larger area either don't use the disc or put a larger piece of acrylic or a CD on top of the existing rotating disc. Works great. I made my own curing chamber by using a small box, lined it with some aluminum tape I had lying around, cut a hole in the top, 3D printed an insert to hold the light in the hole (so it doesn't fall through or slide around) , fancified it with painters tape and some top notch scribbling. All good!! Great purchase. 👍

For the price and some of the reviews, I wasn't sure what to expect. However, mine has a strong, constant light. It does not heat up more that I would expect it to. No noises or buzzes. 405nm works perfectly to cure the resins I use. That was a concern that maybe they were advertising 405 to get us to buy it but it may not work. Nope. Works great. It is a direct light-like a spotlight. So if you just have the resin facing the light, you'll want to rotate (if opaque). I built a cheapo curing box out of foam board and aluminum foil. Shine it in there and it reflects all over. Cures pretty much everything at once. For the price, it works surprisingly well. Or "great value for the money" as Amazon wants me to state for their algorithm.

Cures resin fast. Durable and strong.

Great

I bought this specifically the light. Reading previous reviews I learned that the turntable was not very good at all. So I purchased knowing that there was a very good chance it would not work. I was correct. The turntable did not work at all. It did not even run then stop. It never worked. We got curious and opened it up. With the gearbox opened we found the problem. Not only was it poorly made, it was stupidly made. There is supposed to be a motor and a gear set into a frame to operate the turntable. Instead, there were two copies of the gear thrown into the housing and jammed closed. It would never have worked. Meaning that it was never tested. Most likely this was cheap junk purchased off of Wish and resold here. However the light works well. It is set into a DIY curing station and have used it multiple times now. If you can get the light cheaper somewhere else, then go for it. Otherwise, don't buy this for the turntable.

The light is worth every penny, it works quickly to cure resin prints, or even harden super glue, the turntable isn't very big, and is very flimsy but for the price the light alone is worth it

Works as promised, used for curing resin figurines

Me funciona perfecto para curar las copias de resina

telement simple et efficace attention les uv peuvent etre dangerreux pour la peu ou les yeux toujours utiliser dans un environement controller

Totalmente útil para curar resina. No pensé que fuera a valer tanto la pena por el precio, pero realmente he quedado más que satisfecho. La base giratoria se alimenta de la luz UV, por lo que no necesita de una fuente externa. Al momento de usar la lampara, la meto dentro de una caja de cartón. Masomenos en unos 10-15 minutos mis miniaturas de resina están curadas. Tal vez si desearan curar algo mayor a los 10 cm, esto no sería lo indicado.

Gutes Set für Bastler. In Verbindung mit einer selbstgebastelten, innen verspiegelten Einhausung härtet die UV-Lampe bei mir zuverlässig alle 3D-gedruckten Harzteile. Der Drehteller war mir persönlich dennoch etwas zu klein, weswegen ich ihn gegen einen größeren, mit USB-Stromversorgung, ausgetauscht habe.