Logitech G PRO Flight Yoke System, Professional Simulation Yoke and Throttle Quadrant, 3 Modes, 75 Programmable Controls, Configurable Knobs, Steel Shaft, USB, PC - Black

Works with MSFS 2024. Tried another more expensive brand, the game didn’t recognize it and I couldn’t make it work. This setup was plug and play with fine tuning available in the game.

I find this setup to be as accurate as it can be both for the price and the experience. However I am going to address a lot of the complaints with my own opinions and maybe some people will find it helpful. #1: This yoke is not as out of the box ready as I expected. Try to keep in mind this product is for simulation purposes first and foremost. And it must be designed to be as compatible as possible along a wide variety of games and aircraft. If you are looking for a controller that accurately reacts to things like wind shear, gyro drift, and turbulence then you’re asking for a piece of equipment with motors and servos that costs in the thousands. Instead you have a yoke that uses spring tension to offer a baseline of resistance. #2: I don’t like how little the aileron axis reacts in game. This is a criticism by gamers who’ve never flown a real aircraft. (See above comment about the purpose of this yoke) in a real aircraft you use micro movements to correct your pitch and roll, especially in cable controlled non-hydraulic prop planes. I am a private pilot with non turbo single engine restrictions, meaning I can only fly small planes like Beechcraft Bonanzas and Cessnas. In my experience you deal with wind buffering on your control surfaces meaning you have constant feedback from the world outside your aircraft. This is very difficult to reproduce in a game. The truth is you’re complaining about the S-Curve logic in your game settings. Most flight sims will let you adjust this in game settings for a more personalized feel. Keep in mind if you want simulation you don’t want a major pitch and roll response for making small adjustments, you want slow gliding gradual responses, unless you’re flying a fighter jet. #3: The dead zones are too pervasive and it takes a lot of turning to engage the planes roll function. Also the axis will drift sometimes putting me in a perpetual roll. The drifting is corrected by the dead zones and they are completely adjustable both centered and externally. You can adjust these to precision to minimize drift. And again the dead zones are adjustable in most games. I use this yoke in Project Cars and gyro drift is very noticeable when going 200mph down a track, but again, it’s adjustable. #4: the hardware is cheap plastic and the mounts are flimsy. Even the mounts are adjustable. If you’re getting overexcited and pulling the yoke or throttle quadrant loose then you are not playing a flight sim you’re playing an arcade and maybe need a different control like the x56. For the price the hardware is just fine. These are my opinions. This is not to invalidate other’s opinions. It’s just how I feel about this product, especially in VR.

Great beginner yoke, pretty comfortable for my hands aswell. Not worth much more then 130$ USD Id say, try and get it used. Build quality is about what id expect for the 100 dollars i bought it for, Beware though! It is a GIANT yoke. Not sure how it fits on my desk. Screen brightness is nice, pretty heavy but that may just be because im not super strong. Works very well! Only reason its 4 stars is because they forgot to put screws in the box for the quadrants mount and i have to go get some more screws somewhere, but its ok if its used i guess. Small parts are easy to lose

Works great, everyone likes playing with it, from kids to adults.

Ok, here are some real thoughts from an actual Student Pilot (that's me!) with 25 hours in his real life PPL logbook. 1. This yoke (and additional rudders) saved me about five hours of real flight by becoming instinctual with the controls before getting to the flight school. At $400+ per flying hour, the value here is off the charts. 2. Even though this is an entry level yoke, it was easy to learn a proper approach/flare/landing in the sim - that's the hardest part of flying a real plane. 3. BUT! Because this yoke uses opposing springs to recenter itself, you'll feel the spring transition in the yoke (pitch axis) and it can be hitchy. It was extremely difficult to work back and forth across that spring transition and have a smooth landing in the sim. 4. The solution is this: trim the elevator on final, and you won't have any issues with the springs. There won't be anything to fight. 5. My preferred setup for the lever bank (updated after flying in real life): Left - Throttle, Middle - Flaps, Right - Trim. This configuration unlocks maximum usability and repeatability for this product. (Don't use the middle for fuel mix, you won't adjust it during flight anyway.) Get this first. The expensive stuff won't make you a better pilot. Saturate yourself in the sim with extra trimming, and this yoke/lever combo starts to shine.

The yoke was nice but the metal rod needed to be lubricated and when I tried to fly in msfs24 the yoke was not smooth, was turning but like said not smoothly a bit stuttering due to the metal rod. Overall I recommend this as a cheap option but for a nice option go for something higher

Fue lo que esperaba a mi hijo le encantó llego muy rápido y en buenas condiciones. El equipo es resistente de buena calidad y funciona muy bien.

fully Linux support (Arch linux distro) plug and play (Microsoft Flying Simulator 2020, X-Plane 12) well done Logitech.

Great product. Not cheap but it works like it should right out of the box. Easy install

El equipo me llego sin el cable para conectarlo a la luz