Spigen ProFlex EZ FIT Screen Protector Designed for Apple Watch SE 2/6 / SE / 5/4 (44mm) - 2 Pack

I ordered this product with hesitation due to the relatively low stars but I have not regretted it. My first installation went on without bubbles, but I did not squeegee straight, so my screen protector followed the direction of the squeegee and was applied to the left too far. My second installation was perfect and centered due to the squeegee going straight. There is no adhesive on the sides as shown but it does not alter anything or really matter. As long as you follow the directions and go in a straight line as shown in the video, this should install perfectly. I’m not sure how waterproof it is for I have not tested it full submersed, but I does fine with splashing and hand washing. Screen protector goes on easy and lets you kelp the original feel of the Apple Watch. It is made of plastic and does not cover the screen. It also has had no affect on responsiveness. Great screen protector with good fit.

This is not my first experience with screen protectors, and I usually have good experiences with most of them for various products. This is not one of them. I got this (plus a Spigen "rugged" protector case) for my 11-yr-old son's new Apple Watch that he got for Christmas, so we could protect it. I meticulously followed the instructions video, and there were zero bubbles when I was done. It looked beautiful and you couldn't even tell there was a screen protector. The NEXT DAY, the screen protector showed several bubbles, and the second day, MOST of the surface was a giant bubble. They were bad enough that the watch had a hard time registering touch inputs. And this is the SECOND of the two included screens. For reference, I got a Spigen brand strap and Spigen brand "case" or bumper cover that covered the borders and sides of the watch. I thought that using protective products from the same brand would work well together. This screen protector is terrible. The installation is not intuitive, and even if you do it 100% correctly, the cover produces bubbles over time. Stay away from this one.

Spigen is my go to for protection for my Apple device screens. This new Proflex EZFit replaces an older Spigen bumper case that worked great but also collected a lot of gunk. The Proflex was very easy to apply. I followed the instruction video and wound up with a very small bubble in one corner of the screen. I sent a photo of it and my concern to Spigen and had a replacement kit in a few days. Being impatient, I managed to lift the corner which is nice and rigid and eased the bubble out before the new kit arrived. I will pass the new kit on to a friend and convert them to Spigen. This is not protection for the case but appears to be better than the usual TPU flimsy screen protectors I have used in the past. The watch face sticks out like a frog's eye making the screen very vulnerable if you are active. I never take this watch off during the day and the Proflex is hard, super clear and I cannot even tell it is on the watch.

The Spigen Proflex EZ-Fit screen protector is a sturdy, functional cover for my Apple Watch SE. It went on quite easily, with good instructions and a useful install tool. It's made of PET material, and so is providing excellent protection. I did develop a bubble in one corner a day or two later, and haven't been able to eliminate it, but it's not affecting the watch's performance. It came with a 2nd screen protector, if I ever have to remove this one. This is MUCH better than the TPU-material screen protectors I bought for my wife's watch, which keep coming off after a week or two.

This is a great screen protector, not too thick, not too thin, just right, I honestly cannot tell it's there and the tray provided for installation is genius! and you get 2 of them!! unfortunately, one of the screen protectors came misaligned and had some kind of scuff on the sticky side, 2 of the corners did not sit fully flat and this created bubbles underneath, fortunately, they give you 2, the other one installed without any issues, this is why I giving these protectors 3 stars because I bought a 2 pack but I was able to use only one.

I purchased this item for my Apple iWatch SE 2, 44mm. I watched the video on how to install and found it easy to do. Absolutely no bubbles if you follow the instructions. This item is NOT glass but a flexible material. I purchased this item, because I kept accidentally hitting my iWatch face on various surfaces. Updated in October 2025: I originally purchased in July 2024 and just used the second included screen protector on my new SE3 44 mm. I don't understand why this product has so many low reviews. If you follow the online video, you will not get any bubbles! I watched the video 2x before install but continued watching for a third time, pausing and playing, during the install process. I absolutely had no bubbles when done. Make sure your watch face is clear of finger prints and dust before starting. I almost started a few times, when I noticed a few more dust specks! I missed the dust because of the bad lighting.

Okay so I rarely post reviews but there are a ton of reviews on here complaining that the screen protector doesn’t work and has bubbles after install, etc. This is not the case, when I installed my first one, I DID NOT FOLLOW THE VIDEO INSTRUCTIONS ON THEIR WEBSITE, this left me with adhesion issues and I believed all the bad reviews. My mistake was pressing the center of the protector to apply it, if I had watched the instruction video I would have seen that this is not the correct way to install. Before my second install, I watch the video twice, followed the instructions exactly, and the screen protector has been on ever since. It’s been about 9 months, and I’ve had no issues of it peeling or bubbling up. The protector is very clear and handles scratches well, I have many tiny ones on mine but they are only noticeable when looking closely. It’s unnoticeable that you have a screen protector on unless you hold it closer than about 30cm/12in from your face, the color of the edges blends well into the black glass. I’ve recommended it to all my friends and family that have an Apple Watch. FOLLOW THE INSTRUCTION VIDEO, and you should have no issues.

The Spigen ProFlex EZ FIT Screen Protector for Apple Watch (44mm) is a solid choice for those seeking reliable protection for their valuable device. Designed specifically for the Apple Watch SE 2/6/SE/5/4 (44mm), this screen protector offers advanced features to safeguard your device against scratches, impacts, and daily wear and tear. 1. Easy Installation: The EZ FIT technology makes installation a breeze. With the inclusion of an installation tray, aligning the screen protector ideally is hassle-free, ensuring a bubble-free application. 2. High-Quality Materials: This screen protector is constructed from premium-quality materials and provides excellent clarity and touchscreen sensitivity. It maintains the original touch experience of the Apple Watch without compromising functionality. 3. Durable Protection: The Spigen ProFlex EZ FIT offers robust protection against scratches, impacts, and other daily hazards. It effectively shields the screen from damage while preserving the sleek look of the Apple Watch. 4. Precise Fit: This screen protector seamlessly integrates with the device, engineered to fit the 44mm Apple Watch models precisely, providing edge-to-edge coverage without interfering with its design or functionality. Overall, the Spigen ProFlex EZ FIT Screen Protector for Apple Watch (44mm) offers an excellent balance of protection, usability, and aesthetics. Its easy installation process, durable construction, and precise fit provide peace of mind for Apple Watch owners looking to safeguard their investment. Despite occasional sensitivity issues, its high-quality materials and thoughtful design make it a worthy accessory for any Apple Watch user.

Muy fácil de montar queda perfecto, con solo mirar el vídeo. 1º Lo metes en el útil que te mandan 2º Lo limpias con la toalla, lo secas con otra,le pasa los adhesivos para captar el polvo que pudiese haber caído encima (Todo esto va en un sobre) 3º Quitando le la protección a la pantalla que debes poner la aplicas encima, que acopla perfecta en el útil que has metido el Appel Watch 4º Con una pequeña espátula que va metida en el sobre "La pasa sobre la pantalla presionado hacia abajo , siempre de atrás hacia delante , no empezando en el centro para evitar burbujas "te lo indica el vídeo"

Très bon produit ! Facile à poser et sans bulle Habitué à Spigen pour coque et film verre de l’iPhone j’ai opté pour ce modèle de protection pour mon Apple Watch Photos qui témoignent de la qualité du produit Un conseil : n’hésitez pas

مميز وسهل التركيب ولا تشعر بوجود الحمايه واذا كان اطراف الشاشه بها عيوب وخدوش فهو يخفي هذه العيوب

Muy buena protección y fácil de instalar, siguiendo las instrucciones al pie de la letra no quedan burbujas y se alinea perfecto, no interfiere en absoluto con la respuesta táctil