Gates 90330 Anti Static Rubber Strap, 25" Length x 1-1/16" Width

I wear wool socks year around which builds static when I use my walker and my hand can be 2"- 10" from elevator buttons and metal when I get zapped by static, this product I was told drags on the ground and grounds my walker to save getting zapped.

High Gates quality, just put it under a fastener on your auto body and no more static shocks when exiting, works well.

Excelente me lo acaban de instalar y creo que si va ha hacer su trabajo

No es un simple hule, medí la resistencia y arrojó un valor de 4 K ohms, desde el ojillo hasta el extremo final. Lo utilicé muy poco tiempo ya que me mudé a un lugar húmedo (cero problemas de electricidad estática). Mientras estuve en la región de clima seco (humedad relativa menor al 10%), no noté reducción en las descargas de electricidad estática al bajar del coche, tampoco tenía muchas expectativas que sirviera para eso. Donde si note una gran diferencia fué en la reducción de la electricidad estática en la pintura exterior. En climas de desértico o semidesértico, después de secar o más aún, después de encerarlo, la pintura se carga electrostáticamente, tanto que se siente cómo atrae los vellos de los brazos. Esto es un verdadero imán para el polvo, especialmente después de encerar. Con esta banda, ese problema disminuyó notablemente. Le doy cuatro estrellas porque el diámetro del ojillo es enorme (1/2 pulgada). En mi coche, lo fijé a un agujero existente con un tornillo M8 y una arandela plana que costaron casi lo mismo que la banda. Tuve que recortar un poco ya que al circular el autopista, la cinta golpeaba la fascia trasera

Hi, ham radio operator here. I run HF in the pickup and have had static problems since i installed the rig. I have grounded every body panel to each other and the frame. I have installed chokes everywhere on all the different wires, headlights tail lights, fuel pump, battery, computer, heater fan. You cant name something i haven't pit chokes on. All the chokes were bought from amazon by the way. I have replaced the coil wires and plugs, and still had noise. I’m using heave shielded coax, Yaesu 891 radio and a wold river coil with a 96 inch whip. Actually all of the above helped but the noise remaining sounded like spark noise which got louder under acceleration. I had some 2 inch flat braided ground cable which i thought about trying but say these straps on amazon. I bought two and put one under the doors on the frame where the wouldn't be caught by the tires. Lucky for me I had two holes where a 1/2 inch bolt would fit along with the straps on each side of the frame. It was about a 10 minute install. I took the truck for a drive and the noise was gone. My noise blanker is set at 4 and my noise floor is flat with no static noise. If i turn the noise blanker off I can hear it but not nearly as bad as it was. I’m a happy camper now. Thanks!