Liqui Moly 2037 Pro-Line Engine Flush

I used this on a 2002 BMW E46 I had purchased with no idea of the prior maintenance history. Engine was running a little rough, especially on cold starts despite an oil change immediately after I purchased the car. I elected to use this product for a thorough engine flush which I performed as follows: I poured in the entire contents of the can into the crankcase with the old oil, and ran for about 12 minutes at idle speeds (anywhere between 10-15 minutes is safe). I drained the old oil which as expected, was pitch black. I then refilled the engine with cheaper oil I had purchased from Ace (around 140 AED for 7L) with a brand new filter. Ran that oil for a day just to clean out any remaining deposits and solvent (even though it is designed to evaporate). Some may ridicule this as overkill, but honestly spending 160 AED for a cheap oil and filter is a minuscule price to pay for engine longevity and peace of mind. I drained the oil which had already turned a dark brown, exhibiting just how much of the old oil and deposits remained in the engine. I filled it for the the 2nd and final time with Liqui Moly's "Molygen" 5w40 which is BMW LL-01 certified. After almost 2 weeks, I've inspected the oil several times and it has remained remarkably clean despite driving almost 1,000km. The engine settles down much quicker, and is certainly much quieter and smoother before. If you are religious about changing your oil every 5,000 to 7,000km and have maintained your car since new, this product and entire process is unnecessary. Regular oil changes and the additives/detergents in modern motor oil is sufficient. However if like me, you have purchased a car with no idea of the prior history of maintenance (which you should determine from actual service records and not just the hearsay of the seller) then this is a worthwhile extra step for peace of mind.

It’s perfect it can make the engine brand new from inside I used it with BG 44k

High trusted company with creative products

good stuff

I Also used this item on my toyota camry 2005 model and i aded this liquid to engine oil and run the engine for 20 minutes in idle. After that I changed the engine oil. Now the engine became smoother

Nice good

Very very powerful

Done after 40k kms in ecosports. Good response. Go for it

¿Es parte indispensable en un cambio de aceite? No, la verdad no. Sin embargo, la fórmula cumple perfectamente con su función si sigues las instrucciones al pie de la letra. Si no sabes cómo usarlo, búscalo en YouTube (preferentemente en los canales oficiales de la marca). Entonces ¿para qué usarlo si no es indispensable?, bueno la respuesta es sencilla: para sacarle el mejor provecho al aceite nuevo habiendo limpiado por dentro el motor. Si quieres que el aceite nuevo realmente cumpla con su propósito (lubricante, detergente, etc., etc., etc.,) lo ideal es que "trabaje" en un máquina lo más limpia posible. Así que, en conclusión, es un excelente "pre" para que el motor esté en mejores condiciones para recibir el aceite nuevo.

This works great. I used it after I had just done an engine flush and oil change. Turned my fresh oil black! My truck has had the engine changed, has under 130,000 on the engine, and has been regularly serviçed with full synthetic oil etc. Not an old negleted beater. Check engine light is on from an oxygen sensor, because I ran seafoam through it when I did the first oil change. Code is cleared now, has not returned. Just before my last oil change in my 2008 Sierra 1500, with the 4.8, I added some transmission fluid to my oil (old school teick to clean engine out, I have been doing this for years) idled about 5 km, then added some store bought engine flush. Idled for 5 minutes, then drained all the oil. I jacked up my truck and let it fully drain for about 20 minutes until no oil was left. It came out black, and my oil filter was heavy I then filled it with cheap conventional oil and put a new filter on. My oil pressure went up slightly, and the lifter tick went away. I drove it for 2 days, putting less then 200 km on the new oil. It was still clean, and as clear as the day I put it in. I added this engine flush, and idled it for 15 minutes. The oil pressure went down slightly, and the lifter tick returned. This stuff cleaned a ton of crap out of my already flushed engine! Oil filter was again heavy, even after draining the oil from it for 10 minutes (not as heavy as the first one, but still, heavier then a used filter normally is) Drained all oil out again, refilled and put a new filter on. As you can see from the pictures, the oil came out black again. The oil pressure went up higher then it ever has been since I owned the truck, and the lifter tick is completely gone. Definitely reccomend this. Also, if you are at a point of doing an engine flush, I would probably do what I did and use this as a second flush, as I believe it works better then cheap store brand. How could it get the oil that black if the store brand stuff did it's job? I really did not expect my oil to be as dirty as it was

I used the Liqui Moly Pro-Line Engine Flush on my 2013 Ford F-150 3.5L EcoBoost sitting right around 132,000 miles, and it definitely did its job. I recently tightened up my maintenance intervals to change the oil every 3,500 miles, but I wanted to give the engine a proper reset. Following the bottle instructions, I added the 500 ml can to the warm engine oil, let it idle for about 10–15 minutes without driving or revving it, and drained it immediately. Even with shorter change intervals, the oil that drained out was pitch black and smelled heavily of spent contaminants and built-up gunk. The EcoBoost engines are notoriously hard on oil with direct injection and twin turbos, so seeing that much suspended carbon and residue come out was proof enough that the detergents were doing the heavy lifting. Refilled with fresh synthetic oil and a new filter, and the truck is running smooth and quiet. Given how well it cleared out old buildup, I plan on adding this to my routine roughly every 3rd oil change (around every 10k miles) to keep the turbo oil passages and variable valve timing components clean. Highly recommended for higher-mileage turbo engines.

بطل بطل بطل اصلي ١٠٠%