10Pack 6.6FT/2M Excellent Spotless LED Channel with Thicker Milky White Cover No Hot Spots Sliver Deeper LED Strip Diffuser Channel U108 WW 2M

These tubes are great at diffusing my led strips! no hotspot at all with a 60LEDs/m strip!

I am using 300 LEDs per 5 meters and you can't see any pixelation at all with these channels/diffuser. It was pretty easy to install. Also, my package was missing hardware but after I have contacted their support, they sent me a replacement hardware right away.

Product arrived well packaged and undamaged. Some people complained about sharp edges. The sharp edges of the relatively soft aluminum can easily be 'softened' with sandpaper or a file. I like the longer 2 meter length of these channels (compared to other channels) to minimize the number of joints. My Waveform brand 10mm wide LED strips fit well inside of these channels and, combined with the diffuser, I get a nice light distribution with no 'spots' / 'dots' that can sometimes be seen with other LED lighting set-ups. The standard 10mm LED strip 'clip connectors' are too wide for the channel; the installer can either solder connections, locate the 'clip connector' outside of the channel, or notch the channel so that connector can extend beyond the width of the channel. I purchased the extension clips sold separately -- these extension clips appeared to be of better quality than the clips included with the extrusions. I also purchased #6X1-1/4" long flat head wood screws from a big box hardware store -- I would never install these channels with the screws that were provided in this kit. Kit is pricy but overall looks good and performs well and I was able to make it work well for my application. Despite some needed product improvements I intend to purchase again. I'm curious about safety of product as the extrusions are designed to be held in-place with these spring clips and tiny screws -- It would be unfortunate if the extrusion was used to mount overhead LED strip lighting and and the assembly fell and damaged the lighting system and/or hurt people below.

So far so good we love these! The diffusion is awesome! 10/10 recommend.

These worked out better than I thought. The clips worked well, but I ended up drilling holes and fastening them to my structure. The clips helped align the two pieces together. Diffusion worked well with the depth and the shape of the diffuser.

The Muzata spotless diffuser channels, combined with the Muzata 96 LED's per meter make for a perfect neon effect. I purchased and installed these in my son's bedroom for my first project using WLED on an ESP32 board and powered the LED's using an old PC power supply. 52 feet total length or about 1522 total pixels.

Its a great product. The mount clips sold separately are over priced. But if ur willing to drill straight through the thin aluminum channel that extra cost can be avoided. Screw down your miter box. Measure twice cut once. Use a full size hand hack saw. Not a mini hack saw and definitely not electric. Good Luck!

Order was shipped from California to east coast in just plastic shrink wrap with predictable outcome: 7 of 10 aluminum channels are marred and scratched. To make it worse, half of the aluminum channels are too narrow and diffuser doesn’t snap in no matter how hard you try to press. Trying to expand 2 meters manually is impractical. Too bad.