Kitchen Faucet with Pull Down Sprayer Industrial 1 Handle 1 Hole Or 3 Hole Faucet for Farmhouse Camper Laundry Utility Rv Wet Bar Sinks, with Deck Plate Stainless Steel Brushed Nickel

ممتاز جودة رائعه وسعره ارخص من السوق

Please note that for installation you are going to need a good quality basin wrench. If you don't know what that is, have a friend who does install it for you. It's important to get a tight fit so the faucet doesn't swivel. That said, it's been great. Wonderful to be able to rinse pots with a nice, powerful shower of cold or hot water, and to be able to reach every corner of the sink to rinse it thoroughly. Also nice to be able fit, say, a 12-quart stock pot under the faucet for cleaning or filling One notable issue is the screen between the nozzle and supply tube. Where the two thread together is a combination screen and gasket ring. If any particulate matter gets into that screen, the faucet will leak at the junction between the sprayer and the supply tube. Take it apart and carefully remove and clean the screeen. Re-assemble and all will be well until the next time your water system hiccups particulate matter. Having done that quite a few times (well water system without a filter on the main), the little gasket/screen is now pretty damaged. I do susptect that getting a replacement will be a challenge. I will contact the supplier with an inquiry as well as checkiing the local hardware store. I'll update here with results. But... for the price, it's good. You could buy a fancy-#22##d one from Moen with a magnetic connection for around $300, but, other than easy replacement part availabiltiy, why? And we'll see on the part availability issue. Stay tuned. Cheers, -- netizen UPDATE 21 March 2022 10:59 PST Docking one star. Had some issues with the well here and line became contaminated with bits and pieces of the broken pump impellers. Clogged the little filter on top of the spray head and had to clean numerous times. Filter screen washer basically disintegrated. Not surprising, but now I need a new one. Small part. Contacted Owofan and, after about ten days, no response. I guess I'll have to rig something up with a faucet screen and an 'O' ring. I'll update again if Owofan responds. -- netizen 17 August 2023 09:05 PST UPDATE: OK. I found replacement screens available and installed. No problems since, but now the inverted "J" hose has developed a leak after a few years of daily use in a home situationl. Owofan never got back to me on the washers, so I imagine having the hose replaced or gettinng a replacement would not be possible. I've ordered a variation of the original with an extensible hose that was on sale recently to install in place of the original. I do appreciate having this faucet over the fixed-curve faucet that was in the sink. The faucet is very useful and makes doing dishes and cleanup after cooking that much more pleasurable. Despite the limitations, I'm giving back one star because I just like having these faucets in the sink. The price is so reasonable compared to the major brands that I guess a little extra plumbing is worth it. Cheers y'all, -- netizen

Item is good, looks good and works great.

Felt better than the other one that I purchased, I ended putting the knob facing the front which means the hots on the right the coals on the left I used a buffing pad and alcohol to remove those letters and all I did was reverse the hot and the cold when I connected at the bottom, that way cold is on the right side and hot is on the left side when you face the lever towards the front. We don't have a lot of space to put the lever towards the side because it hits the backsplash, we have like a three-quarter inch backsplash so it's pretty thick we didn't think about it so we have to have a front mounted faucet, this one was easy to modify for that and I didn't need to use the plate at the bottom, it's pretty sturdy without the plate, also I didn't really use any tools just hand tightened at the bottom, if it gets loose I'll use a tool but feels pretty tight.

Awesome