3M 467MP Clear Adhesive Transfer Tape, 0.75" width x 20yd length (1 roll), Small

I've used this tape in various forms (including a 12" wide roll) for over 35 years. There is nothing like it – it adheres to *everything*, lasts for decades, and is essentially invisible. It takes some practice to get good results, however – when you apply it, while the backing paper is still on, you really have to burnish it hard, especially at the edges. If you don't, it will lift off as you peel off the backing paper. If this happens, just push the backing paper back down and burnish some more. Not a pain. It's certainly not the most convenient tape, but I just got finished adhering Sorbethane pads to my speaker stands and even to the rubber feet of my subwoofer, and it holds fast. Sorbethane is a very rubbery, shock and vibration-absorbing material – an impossible task for tape, and yet this tape is sticky and flexible enough to hold the Sorbethane to both the steel stands and the rubber feet of the subwoofer. I also recently brought out some matted artwork that I used back in '95 for applying to a University position. I recently took the exact same artwork from one of my portfolios for use in a class, and it was completely intact and firmly adhered. Really quite astonishing That just isn't supposed to happen. Tape is temporal, and leaves residue. This adhesive defies all that. Essential stuff to have around – you'll find many uses for it once you try it and perfect applying it.

I use the 3M 467MP Clear Adhesive Transfer Tape all the time for my laser engraving projects, especially when I am doing multiple-layer designs. It has become one of those supplies that I always keep on hand. The adhesive is strong, applies smoothly, and makes layering materials so much easier. It helps me get clean results without having to deal with messy glue, and it gives my projects a much more professional finished look. The 6-inch width is a great size for the pieces I work with, and a roll lasts a long time. It cuts well, sticks evenly, and has worked great for my custom laser projects. If you do laser cutting, engraving, signs, inlays, or layered artwork, I definitely recommend keeping this tape in your shop. It saves time and makes assembly so much cleaner.

I use this adhesive to attach leather grips onto camera bodies. It's strong enough and won't leave a residue if I change my mind. Don't expect super glue levels of adhesion, but it's close to what was originally used on these cameras.

I bought this this to re-adhere some of the rubber molding on my Polaroid Impulse camera that had started to peel off. It worked perfectly. It didn't seem that sticky at first so I was concerned, but after a few minutes it gripped incredibly well. No residue at all.

It sticks well. It's nice that you can cut it to size. Easy to unroll. However, the sticky must adhere to each other along the edges of the roll because sometimes the edges stick to each other. Worked well on wood crafts.

This tape is the best. I use it for laser cut wood and acrylic all the time. The material is fairly easy to apply, and makes adhering pieces together a breeze. I was getting frustrated with using wood glue on multiple layered projects and an acylic glue for multilayered projects. Sometimes the glue would dry before i could get the pieces together. Use too much glue, and you have more mess to clean up. This tape eliminated the need for both of those types of glue as I can use it on multiple types of materials in my shop. I can even use it to adhere wood to acrylic, so it is versitile in multiple applications. It is a bit spendy, but worth it to me in the long run. Also, when you consider that using wood glue takes time to apply and dry, this product more than makes up for the additional cost.

Excellent product to re-attach Raptor Boat Decking or similar product. Perfect thickness and stickiness. Both surfaces must be clean and you have to be very slow and meticulous.

I needed this for adhering glass cabochons to printed designs and it's not well suited to that task. Impossible to get bubbles out, and it has a slight texture to it, so even if you got lucky with no bubbles, it's not completely transparent. Bummer. As others have noted, it doesn't unroll cleanly either. Bits get stuck to the edge making a bit of a mess.

Works great, no issues. Happy with the quality and the purchase.

I use this all the time for laser projects as it’s extremely sticky and high quality. It’s expensive but well worth the money.

Produit de qualité professionnelle . L'application doit être rigoureuse :pas de 2éme chance car non repositionnable. Mais collage solide et précis: pas d'interface doublement encollé comme la plupart des doubles face mais seulement une couche de colle qui se détache de son support.. Parfait pour recoller des stickers de carrosserie couteux . Grande taille 15cm de large.

Muy util para unir sin agregar volumen y seguro por que no contiene solventes como un adhesivo liquido

So far quality is average. Can see glue-liked webs when peeling the tape.