Seville Classics Rolling Workbench with 11 drawers, 182,9 x 50,8 x 95,2 cm, graphit

I cannot state how impressed I am with the quality. The wooden top is quite heavy, so it is proper wood. All the metal bits do not have sharp edges where you can cut yourself and rhe instructions are amazing, with stickers on all items to say what they are for and even guidance on how to install (this part up/this part front). It is expensive and would like a cheaper version that is of a less quality, but this is worth it, money 100%. For anyone wondering (like myself before I got it) you can choose to not install the handles or wheels. It is 94.5 cm high with the wheels and 80cm without, and the width without the handles is 122 cm. I do not have the handles to be able to confirm with them, but each is about 7cm.

Came well packed with clear instructions and had no marks or scratches at all. No problem to assemble, good strong shelves in epoxy paint and the outside is a stainless steel finish which is strong and looks good. I keep heavy tools in it and the shelves support them with no problems .Doors fit well and have locks and magnetic catches which work well. I keep mine in the garage and the wheels allow me to pull it away from its place on the wall and use the wooden top surface as a work top. The overall quality and finish of the cabinet is really excellent - I have owned it for 3 months now and don't hesitate to recommend it.

Strong, heavy and sturdy. I paid under £400 for mine from Amazon and at that price it was a bargain. If I'd paid full price, I wouldn't have been upset - it's a decent bit of kit. This is a fair old build though and is not something you can throw together in an hour. Working flat out with a decent set of tools, this took me a good half day. Thus, unless you want to know that it has been put together properly, I wouldn't hesitate is using the build service which is priced at just £25 - I'd want someone to pay me at least £100 to put one of these together again! Negatives - three of the draw fronts suffered screw in rivet failure and took a bit of fettling to sort out and there was a slight dent in the cupboard door, which I had to carefully hammer out. A little frustrating, but I take the view that you wouldn't need one of these if you don't have a decent tool set and a bit of DIY knowledge.

A really quality tool storage unit. Very well made: every hole lined up precisely. The instructions were simple and easy to follow - took me about 4.5 hours to assemble but I did this on my own. Only needed help setting the unit upright as it is heavy. Drawer liners are a super addition. Plenty of space for all my bits, which are finally organised. This is a really well-crafted unit, sturdy and exceptionally well made. A bit on the expensive side, but you generally get what you pay for. Not to mention that it is very smart in appearance. As noted by others, 4 movable wheels would have been better than 2 but not a real problem. Very pleased.

Overall, the bench is made of decent materials which are of good quality. The finished product is exactly what it says on the tin. The only downfall is assembly: is took me about 3 hours to assemble on my own (it comes in two boxes, which contain all parts for assembly which are essentially 'flat packed'). Which isnt a huge problem, though I had expected it to arrive pre assembled, but folding and screwing all the draws was a pain, lots of tiny screws.... But if you don't mind assembling it, I would say it is well worth the money.

This workbench is excellent. It is stylish to look at too - which I know most people don't look for in a workbench. I did not assemble it but I heard no complaints from my husband who did. Everything arrived well packaged and inside it was all well labelled. This item is VERY heavy so try and get it delivered to where it will live to save you having to move it. (Delivery staff will undoubtely be using a trolley). Also, when assembling it, you will need another person who can help you lift/manoevre it as you will initially need to assemble it upside down because of putting the wheels on. Once it's all built it is a lovely workbench. It comes with a beautiful beech wood work top which looks far too good to spoil as a work bench top. The workbench manoevres easily and safely on the wheels and there are brakes for one end to keep it in place. There is a large cupboard in one half with a shelf you can position where you want it. The other half has 2 drawers of the same size and a third much larger draw. When closing the doors, they appear to have a magnetic type closure but sometimes to just need to give them a final gental nudge to be fully shut. There are small hand rails for moving the work bench or just hanging stuff on. It's a quality product and I would recommend it.

Item arrived on time. Assembly was easy and it looks great.

Despite pointing out the manufacturer mistake and being told that they will change the information. The page still says that the door and drawers lock with a single key. The product is lovely but without the functionality it is certainly not worth the price. Their customer service is appealing and thus the reason I have awarded one star and will be contacting trading standards.

Très beau très bonne qualité

I read the reviews and researched this thing to death. Once I got it I removed and separated every piece, made sure everything was there, and started assembly. It was much easier than many have stated. I did use my sockets for the bolts and a battery screw gun for all the screws. Completed mostly by myself in a little over 2 hours. A few tips... 1. Do not tighten the bolts to the top until all six are in and all four sides are in place. That makes it much easier to align properly. Then tighten all up. I used my 1/4" sockets, it made that step much easier. 2. I used a right angle magnetic screw gun adaptor (as I show in my pics). Made those tough to reach screws a breeze. Even with that, keep every screw for a particular panel a little loose until all are set, then tighten up together. It will be a pain if you don't. 3. Don't over tighten anything, especially with your screw gun. You don't need to. If you go overboard you will strip the screws. 4. Tighten the bottom plastic/rubber bumpers by hand. It's easy to go overboard there with a screw gun. 5. The draws and doors are able to be aligned after install. You can get everything very close. But do understand that this isn't a finely crafted kitchen cabinet. It's a garage type work bench so it will not be "perfect", but it will be pretty damn close. 6. I'm a builder and assembling things like this is easy for me. But if you take your time, remove and separate everything first, read through the entire instructions before you start while relating them to the parts you separated, you will understand how it goes together before you even begin. It makes it much, much easier. I would buy this again in a minute. Nice cabinet, more storage than I thought, well built, and looks great in my muscle car garage. I'm ordering some other matching cabinets now to finish the garage. Once done I'll update this review and show with pics how everything looks.

I love the way these cabinets look - they give my bedroom a classy, industrial, polished look. They hold a lot of things - they have four drawers and a big cabinet on the bottom. Extremely well designed and quite handsome. My friends LOVE these cabinets and are getting some for themselves. They’re a little time consuming putting them together- but excellent instructions. One person can put them together.

Ha un aspetto rubusto e non era scontato che lo fosse. Il montaggio non è stato complicato anche perchè gli accoppiamenti tra le parti sono ben studiati e precisi. Alla fine c'è più spazio di quelo che sembra e tutto il mobile è decisamente funzionale.

Verpackung: 2 Pakete, lt. Aufdruck jeweils um die 62 kg. Der Schutz des Inhalts ist gut bis sehr gut. Die Einzelteile sind grösstenteils mit Schutzfolien umgeben. Die Schrauben sind gemäß ihrer Abmessung separat eingetütet. Beschädigungen und Blechqualität: Geringe "Schäden" waren trotz der sehr guten Verpackung vorhanden. Die Kanten des Bodenbleches waren geringfügig eingedellt. Ein Seitenteil hatte einen leichten Knick aufgrund einer Delle; konnte aber mittels Schraubstock gerichtet werden. Dabei erwies sich das Blech als vergleichsweise leicht verformbar und etwas dünner als erhofft. Nach dem Aufbau haben sich aber alle meine Bedenken bzgl. der Stabilität der Werkbank zerstreut, da war nichts zu beanstanden. Aufbau: Es kommen nur wenig unterschiedliche Schrauben zum Einsatz. Diese können nahezu komplett mit dem mitgelieferten Werkzeug montiert werden. Für die Schrauben der Rollen empfiehlt sich eine grösserer Kreuzschraubendreher. Alle Schrauben haben metrisches Gewinde, es gibt keine einzige Blechschraube. Der lange und vormagnetisierte Kreuzschraubendreher leistet gute Dienste. Die Aufbauzeit habe ich nicht gemessen, aber in jedem Falle habe ich deutlich länger als die bereits genannten 3 Stunden gebraucht. Übrigens: in einer Zusatztüte ist zu jedem Schraubentyp mindestens eine Ersatzschraube beigefügt. Qualität und Konstruktion: Kurz gesagt nenne ich das beeindruckend, in jedem Falle oberhalb dessen, was ich erwartet habe. Die Schubladenböden sind alle mit jeweils 2 Querprofilen verstärkt. Die Schubladenböden reichen nach vorne in die Edelstahlfront; meine Befürchtung, dort könnten Kleinteile verloren gehen, war unbegründet. Scharfkantige Blechkanten gibt es kaum; Kanten sind häufig stumpf oder umgebördelt. Allerdings sind die Edelstahlteile (die Fronten) selbst an den Ecken spitz. Ich habe einige mit der Feile etwas entschärft. Die vergleichsweise grossflächige Tür ist ebenfalls mit einem doppelten Querprofil verstärkt und entsprechend verwindungssteif. Die Passgenauigkeit der Teile ist ebenfalls sehr gut, es war keinerlei Nacharbeit erforderlich. Die Schubladen laufen auch unter Belastung leicht und rasten ganz eingeschoben ein. Sie lassen sich also nur mit etwas Kraftaufwand (zum Ausrasten) öffnen. Entgegen der Amazon-Beschreibung gibt es aber keine Zentralverriegelung; die vermisst man auch nicht, es sei aber der Korrektheit wegen erwähnt. Die Arbeitsplatte ist eigentlich zu "schön" und zu glatt für eine Werkbank, aber damit kann ich leben. In jedem Fall ist sie das absolut schwerste Einzelteil des Bausatzes, ich schätze um die 30 kg, eher mehr. Allgemeine Hinweise: Vorab kann man sich auf der Herstellerseite informieren, die Aufbauanleitung gibt es dort als Download. Der Lieferung beigelegt war auch eine in Deutsch. Das Verletzungsrisko bei der Montage erachte ich als sehr gering. Ironischerweise ist am grössten beim Entfernen von den Sicherheitskappen auf den Haken der Schubladenführungen. Das Ausrichten der Schubladen wird in der Anleitung nicht beschrieben bzw. ich habe es nicht gefunden. Es ist aber einfach möglich. Nachdem Einhängen der Schubladen in die Haken der Führungen erlauben die vorderen vertikalen Langlöcher der Führungen eine optisch gefällige Ausrichtung der Fronten.