CLC 5021 Impact Driver Holster,Black

One of the best purchases I made towards my small 12V Ryobi Drill Driver in its history with me; this holster is of a functional design and fits its purpose along with some extra bits for your drill or driver. Having this holster when working and needing to frequently switch between tools is a godsend, it makes life so much easier than finding a spot to place your drill/driver and is a bargain at the price and for the quality. My Ryobi 12V fits like this holster was designed specifically for it and not a massive range of drill drivers and impact drivers; it's a very snug fit for it, very secure and held in by an easily detached strap that can be hooked onto velcro after unclipping to allow easy re-holster after a piece of work. SImply pull off and clip in. I was worried about the clips plastic, but its much sturdier than expected and made out of tough, thick and rigid plastic. I can't see it wearing down quickly at all and a replacement holster would end up cheaper at the value offerred here. One small complaint is that a belt must be looped through it prior, not too annoying and very secure to your person. To me, it feels very natural to have. Considering the perfect fit of my Ryobi and an easily adjustable strap to keep different drivers or drill sizes inside, I firmly believe this holster will suit any 12V driver or impact driver as needed and I highly recommend it if you're drilling or screwing in more than one hole or screw. It's shocking how much help it is. An easy 5 out of 5 stars, wouldn't hesitate to buy another if necessary and will most definitely buy CLC holsters when I require them for tool or bit storage that's on-hand. Save time and get this for its current $10 price, near impossible to regret it.

Holds my Milwaukee m12 drill just fine. The price wasn’t too bad either. I recommend it for anyone that needs constant access to their drill, while being able to free up your hands with ease as needed.

So I like to wait a wile to wright a review. I have had this little holster for a little over a month now and I like it. I am a service electrician and I use my little M12 Drill all day. Every thing form hole saw's for puck light to tightening neural and ground screws in a panel, and so much more. I use to drop it in a pouch on my tool belt, but from time to time it would fall out. I was lucky and missed the tile and hard wood floors for 3 years. But I got tired of playing Russian Roulette with up to $10,000 hard wood and tile floors. So I invested in this holster and it works great! I has held up with relativity no signs of ware and tear over the last month of heavy use. I give it a 5 star for quality.

I wanted a holster to use with the Milwaukee 2453-22 M12 FUEL 1/4" Hex Impact Driver Kit because i frequently wear some type of tool belt while i'm using it and there's no room on the belt for the built-in belt clip. I was considering this holster, a different model by Custom Leathercraft, and the one Milwaukee offers. I went with this one because it was smaller and if i'm wearing a toolbelt i don't need more than just a place to put the driver itself. So how does it work? It's okay... the m12 fuel impact driver fits well in the holster. If anything, the holster could be even smaller/more minimal. It seems pretty secure, even without the velcro strap. Speaking of the velcro strap, it does tend to get in the way in the "ready" position, so i found the best thing was to just let it drop down inside because i never use it. The angle is okay. The open bottom makes it possible to slip the driver into the holster even with long spade bits on it (however, see below). The holster's belt loop is big enough to accommodate most tool belt webbing. There are two real complaints to report. The first is that the somewhat soft fabric inside the holster does tend to snag on bits, especially sharp bits, as has been mentioned by other reviewers. It would probably take a leather pouch to completely avoid this. The second complaint, to be fair, i think would equally apply to both the other holsters i was considering: it's kind of silly that manufacturers can make brushless powerhouse impact drivers that run off just 10.8 volts, but they can't design a holster that can secure bits. That's right, anything but 1" bits (and even those, if you're not careful) will fall out of the little pockets on the holster. If you put a single 1" bit in each of the three (?) pockets, it will be pretty secure. A 2" power bit in there will fall out at the slightest provocation, but if you're working indoors and not squatting or climbing ladders a lot it may work for you. Executive summary: it does what it says: holds your compact impact driver or drill securely on a belt (that you provide) without being too bulky.

Fits millwaukee m12 stubby impact great. Roll in with drill slung low like old gunslinger style. It's good

This is a light, and simple holster, which was perfect for my needs. I use this for smaller and medium sized electric drills. Built an entire fence DIY using this holster and another bag from same brand. Highly recommend

I probably have well over a dozen Mikita 18v tools. But they are a heavy things for regular around the house tasks. Now when I have to drill a pilot hole and drive a screw I put on two of these holsters and carry my drill and driver. Together they weigh less than one of my Makita drill/drivers. It is so much handier to have these holsters. Wish I had found them a few years ago

Great to have honestly

Hölstret är väl utformat, så att en mindre borrskruvdragare kan hänga tryggt och stadigt i bältet utan att riskera att falla ur när säkerhetsslejfen är öppen. Slejfen är delvis fäst med kardborreband, vilket gör att den kan vikas undan för att inte vara i vägen när verktyget skall användas. Hölstret är gjort av kraftig syntetväv även om produktnamnet antyder ”läder”.

Coldre top para minha parafusadeira 12v30 ficou perfeito, tem uma trava por cima da máquina que dá mais segurança principalmente em trabalhos em altura. Só queria e o local onde coloca os bits tivesse uma profundidade maior, de resto tudo perfeito.

If you’ve got the little 12V drill from Bosch (or similar) then you NEED one of these. Due to the lack of a belt-hook on the drill, carting it around - *especially* when up a ladder - is a pain. It’ll fall out of your work-trouser pocket just when you need it, and then ‘hide’ from you. This holster is not only incredibly secure, both in holding the drill and on your belt, it’s also really(!) comfortable! I got home last night (having driven several miles) only to discover I was still wearing it. I absolutely guarantee that you’ll be practicing your ‘quick draw’ technique the second time you wear it. Invaluable!!

It is just what the product is described, looks just like that and it is, it. Is made from really good materials and well finished, just consider that this driver bag is only for 12V or small drivers/impact so consider this for your purchase, really nice, maybe the belt aperture is a little bit small for wide belts, but it fix almost any belt. Exactamente como se describe, un poeta taladro muy resistente y bien construido, ojo: solo tiñen en cuenta que es para taladros/taladro de impacto de 12V máximo, La Bolsa si es pequeña, para que lo consideren la abertura para el cinturón es un poco pequeña pero cabe en casi cualquier cinturón.

As another reviewer mentioned, this fits my Bosch snub nose 12v impact driver (ps42) perfectly - like a glove, like it was actually made for the unit. Really, it's a hard to describe how oddly satisfing it is to drop it into this holster. It just drops in and seems to lock in place - cool. Do it again. Cool... That said it does not fit my Milwaukee 12v fuel impact driver (Jury's still out on which one I like better) as well. It fits, just not as well. It doesn't lock into the hoster when you drop it in. This is because the Bosch's head is a bit wider and the handle angle is a bit more 90 degrees than the Milwaukee's. The holster is also quite compact (good) and minimal. Given the size it's only appropriate for 12v or smaller impact/drills/screwdrivers. Would be nice if it had a couple extra features to it, like some of my drill holsters have. It really is quite minimal. Wanted to give it 4/5 stars for this (given the price) but the fit feels sooo cool for my Bosch I have to give it 5. PS I don't like the word "cool" but that's the voice of my inner child talking in my head when I drop the Bosch into the holster.