SmallRig Cage with Grip and Built-in Quick Release Plate for Arca-Swiss for Sony ZV-E10-3538

Must need accessory according to me very good

so the cage is indeed heavy but if you plan to make it a rig its a must i purchased a small rig HDMI cable adaptor as i make you tube videos . if you don't plan to put stuff on the rig its just adding weigh to camera design is snap on with a small socket to hold it in place quality is small rig i love it PS : HATE THE PRICE its just a cast for camera but needed it

So this is my second Smallrig cage. I have nothing bad to say about these, between all the mounting options the good build quality of these I give them all the marks. This fits my ZV-E10 Perfectly and I ordered with the handle and it makes it fit so much better in my hands.

This is good build quality and this also provides some protection to the camera in case if it gets hit or falls. Also gives multiple mounting points which is definitely helpful. However, I still think this could have been a bit cheaper, kinda seems a little bit expensive for what we get. Althought good no complaints on the quality.

This os really a best investment for my camera

IF you have purchased the sony zv e 10 then you should purchase this. May be a bit costly but the utility wise it is worth buying . The build quality is very good the finishing is very smooth. the grip is small for the zv e10 so this cage will solve this problem perfectly.

Perfect for Sony ZVE10 sturdy look

Highly highly recommended and necessary product for you camera protection and rigging, great build and functionality , really good

Ich habe vor kurzem den SMALLRIG ZV-E10 Cage erworben und bin äußerst zufrieden mit meinem Kauf. Dieser Cage bietet eine beeindruckende Kombination aus Robustheit, Vielseitigkeit und Benutzerfreundlichkeit, die meine Erwartungen übertroffen hat. **Robustheit:** Der Cage besteht aus hochwertigem Aluminium, was ihn nicht nur leicht, sondern auch äußerst robust macht. Selbst bei intensiver Nutzung zeigt er keine Anzeichen von Verschleiß oder Verformung. Das Material fühlt sich hochwertig an und bietet optimalen Schutz für meine Kamera. **Passform:** Die Passform des Cages ist perfekt auf die Sony ZV-E10 abgestimmt. Alle Anschlüsse und Bedienelemente bleiben vollständig zugänglich, was die Bedienung der Kamera erheblich erleichtert. Die Installation war unkompliziert und innerhalb weniger Minuten erledigt. **Vielseitigkeit:** Besonders beeindruckend ist die Vielseitigkeit dieses Cages. Dank der zahlreichen 1/4"-20 und 3/8"-16 Gewindebohrungen kann ich verschiedenstes Zubehör wie Mikrofone, Leuchten und Monitore problemlos anbringen. Die integrierte Cold Shoe Halterung ist ebenfalls ein großes Plus, da sie zusätzliche Flexibilität bei der Anbringung von Zubehör bietet. **Ergonomie:** Der Cage verbessert die Ergonomie der Kamera erheblich. Der zusätzliche Griff sorgt für eine stabilere Handhabung, insbesondere bei längeren Aufnahmen. Dies ist besonders nützlich bei Videoaufnahmen, wo eine ruhige Hand entscheidend ist. Der Griff ist besonders für Personen mit großen Händen ideal, da er ausreichend Platz und Komfort bietet, was die Handhabung der Kamera erheblich erleichtert. **Zusätzliche Features:** Ein weiteres praktisches Feature ist die Arca-Swiss-kompatible Basis, die schnelle Wechsel zwischen Handheld- und Stativaufnahmen ermöglicht. Dies spart Zeit und macht den Workflow effizienter. **Nachteil:** Ein kleiner Nachteil des Cages ist, dass der Auslöser und der C1-Knopf etwas schwerer zu erreichen sind. Dies stellt jedoch keine signifikante Einschränkung dar und beeinträchtigt die Nutzung der Kamera nicht wesentlich. **Fazit:** Der SMALLRIG ZV-E10 Cage ist ein unverzichtbares Zubehör für alle, die ihre Sony ZV-E10 optimal nutzen möchten. Die Kombination aus Robustheit, Passgenauigkeit und Vielseitigkeit macht ihn zu einer exzellenten Wahl. Ich kann diesen Cage uneingeschränkt empfehlen und bin überzeugt, dass er die Nutzung Ihrer Kamera erheblich verbessern wird.

One of the interesting things about purchasing products that have been on the market for a few years is that they have been tested. This discovery of the most insightful benefits and most woesome issues has informed the development of the SMALLRIG Camera Cage for the Sony ZV-E10. And the cage makes the experience of using the Sony ZV-E10 a lot more enjoyable knowing which insights, both bad and good, have come to light. This camera cage is the latest in design from SMALLRIG, at least it is in April of 2025. Including the larger cut out for the hot shoe mount and the arca plate swiss mount made right into the bottom of the cage. I don't want to restate all the improvements it's made, but rather point out this is better buy now, than it was a couple years ago. More bang for your buck! And out of the box, what you get is the cage and small baggie containing the securing clip, screw, and allen key. No plastic, I like that. I bought this camera cage mainly for protection of the Sony ZV-E10. The aluminum construction feels great and will protect the corners of the camera from falls that would have caused major damage. Even being aluminum, this will make the camera even more heavier; although, this is the case for all cameras. The cage also makes great use for extra mounting points to turn this little guy into a entry-level "Rig". With the addition of a cold shoe mount on the bottom, 1/4 - 20 and 3/8 inch screw points, you could mount monitors, stands, lights, and microphones. Three 1/4 - 20 threads along each side, four on top with one 3/8, and five on the bottom with a single 3/8 thread as well. I like that it comes with a small silver flat head tool that magnetizes itself into the bottom of the cage. Convenient. I like the fact that it has both 1/4 and 3/8 female threads. Versatile. The camera in it's stock form comes with a very subtle hand grip, I absolutely love the feel and added girth the cage gives you with its silicone grip solution. Incredible. A few drawbacks I noticed. I mount a Arca Swiss plate on the top of the cage with a 1/4 - 20 thread and clamp it to my overhead rig. If you want it dead center, you sacrifice the ability to switch the camera on/off because the switch itself becomes blocked by the overhang of the plate. I remedy this by just shifting it over one to left, and it works fine. And if you have tiny fingers, or small plate this could be your remedy! The depth at which the cage makes the battery compartment can be tricky to get the SD Card and Battery in and out. It's really not a big deal, just takes some time to get used to. Lastly, I may be very well doing it wrong, but the mounting clip that secures the camera to the cage, doesn't fit as tight as I would want it. Meaning, when securing the clip by inserting it into the camera's original dongle mounting location and using the provided screw to fasten them together, the clip doesn't look flush. I tried keeping the bottom screw loose and doing it again, but was unable to flatten it. I'll include pictures for you fam. These really are minor nuances and make no impact on overall satisfaction on the SMALLRIG camera cage for the Sony ZV-E10. Don't get it twisted, I love this thing! It's almost a necessity. Unless you want a really sleek and slim look. It's incredibly useful, with all it's mounting options and the protection it provides alone, is worth the reason to get one for yours. It's worth the cost compared to a new camera. No exaggeration. This cage is for anyone with this camera and I wouldn't recommend anyone to go without it!

Been using this cage on my ZV-E10 and it honestly makes the camera feel way more complete. First thing I noticed was the grip, it’s a lot more comfortable than the stock one, especially when using heavier lenses. Feels way more secure in hand. Build quality is really solid too. It’s all metal and doesn’t flex, so once it’s on the camera everything just feels more durable and protected. Definitely gives a bit more confidence when filming or moving around. I like all the mounting options as well — makes it easy to add a mic, light, or whatever without needing extra stuff. It basically turns the camera into a proper little rig.  Only thing is it adds a bit of weight and makes the setup slightly bigger, but that’s kind of expected with any cage. Overall though, really happy with it… feels like one of those upgrades that you don’t want to take off once you start using it.

J'ai acheté cette cage pour plusieurs raisons : - Déjà j'ai mis un peu d'argent dans mon appareil et même si ce n'est pas un modèle de photographe, je tenais à le protéger. - J'ai pas mal d’accessoires et je n'ai qu'un seul pas de vis sous mon appareil. Donc impossible d'en monter deux simultanément. - J'ai des lampes pour faire des éclairages d'appoint et comme l'embase est en métal, je ne tiens ABSOLUMENT PAS à les monter sur la griffe à dégagement rapide de mon appareil et que cela fasse un court circuit. J'ai donc commandé cette cage. J'ai bon nombre de produits de la marque Smallrig et je n'ai JAMAIS été déçu. Ici, le produit est dans la continuité de ce que propose la marque. On est sur une cage en aluminium à la finition parfaite. Tout est pensé, on a un revêtement caoutchouc sur toutes les parties en contact avec l'appareil. La cage se monte au moyen d'un outil qui est dissimulé dans la cage et qui tient avec un aimant. La poignée en silicone offre un maintient bien supérieur à la poignée native de l'appareil (un peu plus imposante mais le grip est bien meilleur tout comme la préhension de l'appareil). Tout reste accessible à 100%, les boutons d'enclenchement vidéo, photo, réglages etc... Et bien entendu toutes les connectiques et logements pour batterie et carte SD. Et pour finir, on a des pas de vis absolument de tous les côtés. Je ne saurais dire combien d'équipements on peut monter simultanément mais on peut upgrader sa config de manière vraiment significative. Et on a une griffe de dégagement rapide directement sur la cage. On peut donc monter un éclairage d'appoint à base métallique sans aucun risque pour l'appareil. Alors oui... l'appareil prend 75 grammes au passage. Mais au regard des tous les avantages derrière, c'est vraiment un tout petit désagrément. Personnellement c'est un coup de cœur pour moi ❤

This SmallRig cage is a great one for the ZV-E10. The grip feels super comfy and makes handheld shooting way more stable considering you can add more attachments to your camera. There are tons of mounting points for mics, lights, or whatever else you need. It doesn’t block the battery or flip screen, so you never have to take it off mid-shoot. Solid build, easy to use, and just makes the camera feel way more pro. I can recommend it if you're trying to level up your rig!