IMBZBK for Samsung Galaxy S22 Ultra 5G Screen Protector [Not Glass], 3 Flexible TPU Film with 3 Tempered Glass Camera Lens Protector, Fingerprint Suitable, Case Friendly [3+3 Pack]

A+ for a simple and thorough system for applying the protective screens. Wow. I'm so impressed. They thought of everything. So easy to install. Watching the video in the product description helped. Inserting that plastic guide piece into the charging port so that you can line up the front screen on the tree tabs was genius. And the small pouches are complete with the cleaning sheet, cloth, and dust lifter, which are super effective. And the rubber non-slip mat to set the phone on was a very nice touch. Plus, the method of splitting up the adhesive in stages is so effective! You start securing it in place in the middle of the screen and seal in the top half first, then the bottom half. Smaller stages like that helped allow for zero air bubbles under the protective layer with one try. That was a first for me. Also, thank you for the perfectly-fitting camera lense cover! The quality of my photos is unaffected, as in I don't see and blurred borders or unclear images, and I feel so much better knowing that the camera lenses are protected. Such great quality! With my last phone, the S9+, one of the glass camera lenses cracked just days after I had the phone, from a fall to the cement ground. Somehow my photos still looked great, but I know I was just lucky. I don't have to stress about that now, knowing that the lenses on my new phone can't be damaged! And I'm confident that this front screen will protect my new Samsung Galaxy S22 Ultra phone very well. It feels fairly similar to screen protectors I've used on previous phones, and I never had to deal with phone screen damage, despite the many tumbles my phones have taken. (Playing hacky sack as a kid has probably helped with my phones' survival, too! Quick foot-buffering response is a plus when the phone goes on a rapid downward trajectory.) And if the screen cover does get damaged over time, no worries, the kit comes with 2 extra sets! I don't generally write reviews, but I'm just so pleased with this experience so far, and after investing in such an expensive phone, I feel at ease about it being well protected. The only thing I would have done differently is that I would have left Samsung's protective thin strip of clear lining on the bottom of the phone. The instructions tell you that it's very important to remove it, so I figured that it meant that the new protective lining would cover the bottom of the phone, where the charging port is. But it doesn't. So my preference would have been to leave the manufacturer lining in place there. Maybe they figured the lining would be thick and prevent the plastic guide insert from pushing in all the way, which I suppose might prevent accurate placement of the screen protector, but on my phone that wouldn't have been the case. But that's not a big enough deal to count against a 5-star rating for me. I highly recommend this screen protector kit!

I will add I used the squeegee all around the edges before I took off the top instruction film because my fingers are too sweaty and oily. And I went very slowly-an inch or less at a time-while I repeatedly squeegeed in all directions during pushing to be sure I didn't cause a bubble. It worked well-no bubbles. S Pen, fingerprint, and facial recognition is working well. The enclosed instructions tell you how to increase touch sensitivity on your phone. Quote: "Customer Review Amazon Customer 5.0 out of 5 stars Excellent Product That Delivers On Its Promises Reviewed in the United States on February 23, 2022 Verified Purchase I installed this kit on my S22 Ultra and had excellent results. There are a couple of pointers I'd like to pass along: »Make sure to watch the installation video several times so you're confident with the install of the TPU protector. It's critical for a bubble-free install. Go slow and steady as you pull back each end and slowly apply the protector. Then slowly work the edges of the protector over the curves of the screen with your fingers. »This TPU protector works well with my case. Since the protector clings tightly to the curve of the screen, I had no issues with my case pushing up on the edges of the screen protector as the case was installed. »The fingerprint sensor operation was unaffected by the install of this protector. »The camera protector fits perfectly, but if you're going to use it, choose wisely if you haven't yet bought a case. You will need to choose a case that has one single opening for the array of cameras, because the edges of the case opening have to fit around the camera protector. If you choose a case with individual cutouts, it's not going sit properly against the lens area on the back of the phone. I am pleased with the design, quality, fit and performance of the products in this kit."

Usually I don't buy physical screen protectors, the liquid ones have served me well for many years. But since this is not a cheap phone, I decided to go with screen protectors on this one. I ordered these and a pack of glass protectors. The glass protector didn't look right, didn't cover the whole screen and left a big visible circle where the fingerprint scanner was, so I took it off immediately. I then put on one of these. Installation was super easy. Although the screen feels more rubbery now, it doesn't take long to get used to and provides good scratch resistance. Not sure how well it would fare in a fall or something falling onto the screen, but I'd rather not test that and that's also why I have a case on the phone. When I installed it, I noticed that the notch over the front camera didn't align. I think it was miscut as I followed the instructions to a tee. Not to worry, there were two more in the box. Second one fit perfectly, albeit a tiny air bubble which I'll get out. In addition to the three screen protectors, you also get three camera covers for the rear. I didn't use those as I don't think they'd fit in my case. But it is an amazing deal for the price nonetheless. Now here's the craziest part. Almost immediately after installing the first protector, I got an email from the company making sure I ordered the right protector for the right phone and that it installed correctly. I told them of the situation and they immediately sent me out a new set. They did not have to do that, but that is some amazing customer service. Not to mention they were super friendly. I would absolutely buy from this company again and reccomend that you do too if you're in need of a great quality screen protector. They are one of Amazon's finest sellers that I've dealt with. UPDATE 3/7: Still like the screen protector, but it is a fingerprint magnet. And after only a few days, I'm also realizing that it is not entirely case friendly. The bottom part keeps lifting up and I have to keep fixing it. I'm not sure how many times I'll be able to fix it before it stops sticking. Other than that, it does seem that it has stopped a few scratches (maybe it's just that the protector shows scratches more than the screen). Since it's still been a good experience otherwise, I'll still leave it at a 4 star review. But keep this in mind when looking for screen protectors. It's though to find good protectors, especially on a curved screen.

Do these protectors break? Yes Has my iPhone screen been damaged while using these protectors? No The installation process is just about fool proof. Making precisely aligned, dust free installs just about automatic. Love these satin finish screens. Can’t go back to a glossy surface.

*****UPDATE***** 6/10/22 Despite my dismay, I've had to continue applying a new one of these every couple weeks, while shopping around for one that works better. Well in the meantime, I dropped my phone and learned that you can add one more flaw to the list for this Screen "Protector": It doesn't Protect anything. My screen got cracked anyway. This screen protector is pretty much only good and protecting against minor scuffs in your bag or pocket. It will not protect against much else. ****UPDATE**** 4/25/22 I'll leave my original Review down below. About the only good news since I've used this product, is that I found out my original issue was indeed a defect. I got the replacement order, and the first one went on smooth as silk. Yay!!! Buuuuuut, here I am two weeks late.....and the film has been shifting all over so bad, that it's finally getting to the point that I can't ignore it and just keep straightening the kinks out. Which mean, btw, that it started sliding and bubbling with the first week. C'mon now. I don't care if this was a life saving, world hunger ending product. If any screen protector doesn't stay firmly in place without any sliding, bubbling, or falling apart for a minimum of 6 months to a year, it is absolute garbage. I think it's time to go back to my trusty old, cheap glass protectors. They start to chip and piece on the edges after a good while. But I'm rough on my phone, and that take months and months. Plus, since it's a glass protector, it doesn't bubble or slide ever once it's set, it will just slowly start to chip off tiny little pieces on some of the edges, but it takes a long time, before they are bad enough for me to swap it out for a new one. Bottom Line.....if you buy this product after reading the reviews(or Not Reading the Reviews), You deserve a crappy screen protector. I sure did 😁🤦🤦🤦 Time to Upgrade!!! Whoot! ****Original**** First off, I'd like to say, I didn't think I could get excited or be impressed by a screen protector. But I've always used super cheap ones that don't come with any sort of guidance system, so it didn't take much to impress me. But I genuinely got excited by the level of detail they put into this product and process. They got a whole step by step video and all the neat tools to walk you through thoroughly cleaning and clearing the screen before application. So in walking myself through the steps. Cleaning. Clearing. Alright so far so good. My screen has never been cleaner. And then.....I go to begin applying the screen protector, and much to my surprise and dismay, the screen protector/applicator ITSELF is spitting this dust like mess all over the screen. Right at the splitting point, as I'm pulling back the applicator to run the card down the phone, to begin applying the actual protector, there is a powder like substance spewing all over my phone from underneath the removable film. This is going to be hard to understand unless you're familiar with the installation process, but at this particular step, the phone is squeaky clean, and your hands are full. You've got one hand on the applicator - pulling it back to reveal the real/permanent protector adhesive, so you can begin sealing it down on the phone - and one hand on the squeegee, guiding the protector adhesive down the phone screen for it to begin setting. You do this process once for the top of the phone and once for the bottom because the protectors removable film is split between both sides. The crust, dust, or powder that came out, came from that place where those 2 sides come together, only to be released once the two sides of the protector's removable film, has been separated. In short, at that point....you've jumped out of the airplane. It's too late to ask for a parachute. You're committed. So if the applicator itself is dropping dust on your screen at this point, there is nothing you can do about it. Now....when this happened with the first application, I was bummed but not too worried. I assumed it was a bad piece, or maybe even that I might have missed a step or messed something up. It wasn't until it not only happened a second time, but was even worse. Despite the fact that this is definitely a manufacturer defect or design flaw, the last thing in the world I want to do is leave my phone unprotected and expend the little energy I have writing this review and returning all this stuff/finding something new to order. I just want to protect my new phone and play with it. But I did everything in my effort to try to remedy the issue and clean up the powder as I was holding the applicator up, but there was just no way to make it happen with anything short of 4 very agile hands. Which I do not have, and my dog is too lazy to help. So all this to say.....unless this is a 1 in 10,000 defect, I think this is a product to stay away from. It's got all the awesome design features to make it the coolest screen protector I've ever used. But if this is par for the execution of all of that thoughtful design, it is left wanting. Now, I'm happy to be proven wrong. Heck I hope I am. I hope I simply got a bad item, and am quickly shipped a working replacement that goes on smooth as butter. I will gladly update or remove this review. But for now, the verdict is, keep searching for the right fit for you. The last thing you want to do, is buy a protector thinking it's gonna be what you need, flop your way through multiple failed attempts to apply the protector, and then find yourself stuck between a rock and a hard place. "Do I leave my phone unprotected until I find a replacement, or do I try not to lose my mind starring through a pile of pixie dust everytime I look at my phone screen?"

I got my new S22 Ultra in early March and needed to get a screen protector(this is basic for any new smartphone purchase), so I got a tempered glass screen protector, it was a two-pack. I went ahead and installed it, it looked and worked fine, but I was having issues with the fingerprint scanner not registering my fingerprints. I had to re-register my fingerprint every few days, which was a real hassle and problem for me not to mention was very annoying. So I was in the market for a new screen protector. I then saw this three-pack of screen protectors, which has a bunch of great extras. It was very easy to install, with no issues whatsoever. It looks solid and had no issues with the fingerprint scanner reading my fingerprint at all, everything was great, and it didn't cost $50 either. But...after countless uses over a few weeks, the screen protector started to move from one side to the other, very slow at first, but eventually, it started moving too much which caused a bunch of bubbles. I went somewhere today(there were no bubbles), then I took my S22 Ultra out of my pocket, and then all of a sudden, there were a ton of bubbles. As the photos above indicate, Day 1 = no bubbles, looked great, then on Day 21(three weeks), bubbles galore = trash. So, if you are in the market for a new screen protector, this is a solid one and at $12.99 for a three-pack, you can't go wrong, BUT, if you don't want to be annoyed every three weeks or so because the screen protector decides to take a nose dive and start bubbling up which is rendered useless and has to be removed, then you should probably look elsewhere. I'd request a refund, but I doubt they'd give me one.

I bought a tempered glass protector a week ago, and it was a fail. All fingerprint scanners needs full contact to your fingerprint directly through the protector material without any air gaps. Bottom line with ALL glass protectors are that the fingerprint scanner will not work since the glass is floating and not making contact directly onto the screen. Some glass protectors attempt to address this by having a sticky adhesive under the glass in the form of a circle, making contact with the screen, but even this does not work fully since sometimes there are air bubbles trapped or the screen is no longer sticking to the scanner. Screen protector films like the one here addresses that issue, since it makes full contact to the screen with a light adhesive, and there's no gap for air bubbles or even dust to enter. Problem with protector films are that it is difficult to apply without dust particles trapped underneath, air bubbles, or even aligning it perfectly with the screen on the first try. This protector i bought addresses all of that because it has a kit that allows the film to be secured to the USB port prior to installation, and there is no risk of air bubbles or dust particles since the backing is removed as you literally apply the material. Anyone who has applied film protectors know that once you remove the backing and expose the sticky part, it's only a matter of seconds before dust in the air lands on a screen or touches the sticky part. You also have to touch the sticky part to hold the protector in your hands, leaving smudges on it, while trying to align it to the screen and even that can be done wrong. This protector is not like other film protectors because you don't have to remove the backing and expose the sticky side prior to installation, it's all done at the same time using their kit. They have a video on their website on how to install this, i suggest you watch it rather than trying to understand what i am talking about. The entire installation took me less than 5 minutes, and it came out perfectly. I have never had such a quick and painless installation in my entire adult life of using smart phones. This kit also comes with 3 protectors for both the screen and the camera, along with all the things you need to install it. I cannot recommend it highly enough.

worked well, was not hard to install, and true fit. Case friendly