VViViD+ Ultimate Headlight Taillight Tint Vinyl Wrap (16" x 10ft, Light Smoke)

Works good and is easy to install. Looks great. Used almost a year ago. No warranty issue.

This tint is awesome. It looks amazing, very glossy, with plenty of light visibility still from these LED lights. I'm very happy with the results. A heat gun is highly recommended. I would also check out some YouTube tutorial videos, if you're unfamiliar with the installation process (I watched quite a few myself). Update: I'm going to remove the dark smoke from the headlights, because I'm not getting nearly enough luminescence when driving at night—my headlights just aren't bright enough now. So, plan now is to peel off the dark smoke from the main portion of the headlight assemblies and wrap them in light smoke, then wrap only the upper, flat portion in dark smoke on top of the light smoke. Because of how bright my stock lights are, other oncoming drivers often flash their brights at me as if I have my brights on, when they're actually on dim, so, I do want some amount of decreased brightness... but this dark smoke is too much of a decrease. The light smoke should be perfect. Will update once I've put the light smoke on... Update: I peeled off the dark smoke and replaced it with the light smoke. Then, I laid out a cut line over the top of the light tint using the 3M knifeless tape, then wrapped the dark smoke over the top of the knifeless tape and then made my cuts. The result is light-smoked front door the headlights, with the top and outside portion fully dark. This should be perfect... Just have to test it at night to find out.

Copious amount of material, markings on film help with measuring, and easy to use. Heat gun is needed to stretch material for placement on light. Blade and squeegee are also needed to push out air bubbles. No water/soap needed. The dark color is what I wanted! Thank you. The lower light has the film, not the headlight.

Tint looks great once you get the hang of working the material just right. Adhesion is great. Quality is fantastic. Bubbles are easy to remove if you know what you’re doing.

This was very easy to install and it worked great however, I do wish it was a little bit darker, but it’s easy to just do a double layer of this tint

Even though this is supposed to be the lighter of what's offered, it was super dark. Putting it on was kind of a hassle but that could very well be because it was our first time. The first headlight my boyfriend put on by himself, and it turned out kinda wrinkly. The second one I helped him with, and it turned out better. It was cool to see how it stretched and expanded with the heat gun, but you gotta watch how long/close you hover over it. We ended up just removing it a few days later because we couldn't see while driving at night. We actually ended up using the rest of the material to cover a light in our bedroom, and although its wrinkly it covered it nicely and dims the light a pleasing amount (we like the dark tho).

After purchasing 3 rolls of a different product before this, which i removed and discarded, I went with this product and am happy. My reason for choosing was the light shade and the protective film cover that is removed afterwards to reveal a perfect gloss surface. It was easy to install and I just used my heat gun for a quick touch. I like that you can see the tailight pattern through the film, giving it an oem look which was exactly what i wanted. I only did the tail lights so far as i have a different product ppf on my headlights but will try this next. I would buy again.

I install vinyl on vehicles and buildings for a living. I have used numerous VViVid vinyl and tools over the years and this is the first time I have been seriously let down with VViVid products. Negatives. - BIGGEST PROBLEM: Has a purple hue which looked horrible and ended up pulling the vinyl back off. It's hard to see the purple in the pictures, but it's there. Looked like a cheap window tint job. The purple hue is not mentioned on their page. You can see the purple hue once you take the vinyl out of the box. - This is quite dark for a "light smoke". - This vinyl had a really bad haze to it. Lights looked like they needed to be cleaned up due to age. - Very easy to scratch once protective film has been removed. - Description states..... "glass-like finish" - it's not glass like, VViViD's older smoked tints were glossier and more of a glass-like finish this vinyl. "nano air-release so fine" - Honey comb effect easily seen before and after heating up the vinyl. "Ultimate Tints comes with a protective cap which will stretch with the film as you install it." - Is this supposed to be removed after install??? No other mention of this anywhere, but it does have a thin protective film on the vinyl, which came off super easy like it was supposed to. "By far the glossiest headlight tints" - These were not very glossy. "More visible light transmission than has ever previously been possible in a Smoke headlight tint" - I have used Lamin-X tints in the past with no haze and better light output then this vinyl. Pros. - Easy to rip back off. - This vinyl has a protective film on it which you pull off when install is complete. I like the idea of it to prevent scratching the film while installing, but really it's pointless. Vinyl should not scratch up that easily if installed properly. - It was very easy to install with no air bubbles.

Excelente material, facil de poner y con un acabado brillante, Quien ponga menos de 5 estrellas es porque no sabe instalarlo, no es culpa del material.

المنتج سيئ و لا يثبت على الشمعات بسبب الغراء الضعيف

Very good tint, light smoke is nice and light. Easy to use required very little heat watch the YouTube videos and you can't go wrong. Has a backing and a top protective layer which can be stretched so remove when you have finished the job.

Je ne savais pas trop à quoi m’attendre au début, mais franchement, je suis agréablement surpris. Le film teinté de la marque VViViD est facile à appliquer, même pour quelqu’un qui n’a pas l’habitude de poser ce genre de produit. Je l’ai utilisé sur mes feux arrière et le résultat est exactement ce que je recherchais : un look plus agressif et plus épuré, sans nuire à la visibilité ou à l’efficacité des lumières. Le film est assez épais pour donner une bonne durabilité, mais reste assez souple pour bien épouser les formes. Aucun pli, aucune bulle, et la découpe s’est faite facilement avec un bon cutter. La colle adhère bien, mais on a quand même un petit jeu pour repositionner au début, ce qui est parfait pour ajuster sans stress. À voir sur le long terme, mais après quelques semaines, ça ne bouge pas et tient très bien, même avec le soleil et la pluie. Bref, je recommande sans hésiter à ceux qui veulent donner un petit coup de style à leur auto sans se lancer dans quelque chose de trop compliqué.

I was wrong. I left a bad review before realising there is an outer protective layer that needs removing after install. Now all is brilliant.